Make tiger tank in Solidworks (Hull and Turret only)

Everything need to be made and delivered as SolidWorks 2017 or Earlier Versions with the complete feature tree. Overview: Create hull and turret of the tiger tank in 1/56 scale, no tracks. You are to make the early version and the late version. Those two model are mostly the same with only minor differences (see images). Make the Late Tiger first then use that model to make the early tiger. Must include all parts files. Getting the right proportion is the most important. Details are secondary, the model need not to be extremely detailed. Scale: 1/56. Model must be scaled from the get go. Orientation: o Model must be oriented correctly. Front=Front, Right=Right, Top=Top o Right plane must be the axis of symmetry Real-life dimensions: • Real life dimension will be provided in reference. Model unit: mm. I need the files in mm Sub Assembly: • Turret (part) o Must be made as single part, oriented correctly • Hull (part) o Must be made as single part, oriented correctly Notes: • Assume that the vehicle is generally sysmetric • No shells, everything need to be in solid in the end. • No thin wall: No wall should be thinner than 1mm • Avoid small features. No features smaller than 0.8 mm. • Feel free to simplify details so long that the overall appearance is not affected • There is no bottom details. • Reference views will be used to gauge the accuracy of the model. Thing you are not allowed to do: • Create this model using extrusions, no Solidworks surface unless really necessary. • I will add fillets and chamfer myself, you are not allowed to use fillet and chamfer unless really necessary • You are not allowed to create the grids in the engine section. This is a very straightforward project, with 0 engineering knowledge needed. This is a very easy project if you know what you are doing: all bid above 300CAD will be ignored. Possibility of making the Sturmtiger and other future projects if you do well on this project.