Raspberry webserverJobb

I want to use my Raspberry Pi and a TV-screen as a Shuffleboard scoreboard. I have three physical buttons, when i press button1 it should add a point for team number1, when i press button3 it should add a point for team number2 and when i press button2 it should reset both counters. They are connected like this and ive used gpiozero: button1 = Button(2), button2 = Button(3), button3 = Button(4). I will also need a GUI with a background photo and the score for each team.

Design a prototype robot to measure ...a jet engine combustion chamber. The component is fired Alumina and is 52mm in diameter and 75mm height. The part is lifted form a trolley of 24 parts, into the measuring station, and back to another accepted trolley. Use off the shelf electronic and mechanical parts, RS Radionics, Farnell, Mitsumi, other makers sites etc. Determine all parts such as stepper motors, stepper drivers, PLC or raspberry pi, Arduino, sensors, mechanical sliders and rails, grippers, measuring head, power supply. Create developmental drawings in SolidWorks and a Bill of Materials for the project. Estimated cost required Indicate any further work required. No coding required but do consider and document how it will be programmed. Most experienced designer gets the j...

Looking to subscribe to multiple topics on multiple brokers and store all data in a single SQLite3 database. Simple UI required for inputting brokers/topics. Script to ultimately run on Raspberry Pi.

Modify library - , so that it supports multiple P5 LED panels Hardware: * Drive board: * LED panel: CHIPONE ICN2153 (2727), 64x32, 1/8 scan, P5 * RPi 4/Zero 2 W More info:

Small IOT project. Hardware already running. System is based on a ESP32 embedded controller, sampling data and running a Webserver. IDE is PlatformIO with the Arduino framework. The ESP32 has a SD card connected via SPI containing GPS track files. The job is 1) to program the (ESP32) Webserver to show the SD Card file list on a webpage (=directory listing) and allow selecting one file in the browser for download or display 2) display the file on the webpage as a GPStrack, using a javascript library: GPXView library (- or similar - - site is german but there is a translate button top-right)

I have a python django website and an AWS debian server. I'm looking for a sys admin to configure Nginx, wsgi and ssl for deployment.

Hi, We have a customer who has an Ionic mobile app, and they want to bundle mTLS certificates with the mobile app for they download and install at the same time the mobile app is downloaded and installed. They are wanting to authenticate users against the Apache webserver as an additional layer of authentication, if a user doesn't have a certificate installed the connection will simply be blocked. NOTE: I HAVE WASTED TIME WITH TWO INDIAN COMPANIES WHO SAID THEY HAVE DONE THIS PREVIOUSLY/KNOW HOW TO DO IT AND THEN FAILED TO DELIVER - PLEASE ONLY APPLY FOR THIS PROJECT IF YOU HAVE EXPERIENCE IN DOING THIS.

Task Requirements: 1. Install ecommerce platform from source code in codecanyon project link below: a. Source code will be provided by Employer. 2. Webhosting server and control panel will be provided by Employer. 3. Freelancer must fully install and deploy provided code to a webserver and make sure all settings are done as per source code instructions. 4. Ecommerce platform is build on following technologies: a. Laravel 8, b. PHP 7.3 / 7.4

ONLY FREELANCERS WHO HAVE DONE THIS BEFORE ARE WELCOME! No time wasters even if there are tutorials you might still run into errors. Hello! I have a Debian server that needs to have Apache installed with AWStats (Advanced Web Statitics) (). It should be very simple if you know what you are doing. Please install on my server. Successfull install need to generate standard log files like the attached file usually located in the log folder.

I have an Ubuntu 20.04 server running t...the lowest bid. You should know: - I have completely erased and reinstalled Apache and created new certificates and get the same results. - There are NO errors in the log files. - It's not a firewall issue, i was able to access the websites fine before with a self-signed certificate. You will need to install Teamviewer to access my workstation, then SSH over to the webserver. There is no direct ssh access to the webserver. Do not bid if you're not comfortable with this arrangement. When you are done, I'd like you to tell me what you found wrong so I can correct it if it ever happens again :) Please make sure you mention your experience in your reply. I'm not looking for the cheapest, but I do need it fixed ...

Write driver for ADXL345(I2C) using IIO Subsystem and allow user to perform as many settings as possible. on raspberry pi 3b+.

Im working on a digital pet. It feeds in WIFI SSID's which will be converted into tokens. It displays emotions depending on the number of tokens it gets. I just need the code to display emotions

I need a crontab service that will excute this command in order to restart my Mosquito service (systemctl restart mosquitto) I attached the file I am using and still not work I am uploading this file to the correct root "/home/ubuntu/" and set crontat to "*/5 * * * * /home/ubuntu/" for every 5min updates - but still not work I setup also on my raspberry for testing and still not working help me!

I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

Proper routing in Raspberry Pi and other nodes to reach all nodes from GCS. Debugging network traffic in Command line tool. (use of tmux and tmuxinator to automate with a bash script) my project budget: usd 30

...cauliflower, broccoli, coconut aminos, monk fruit (467 kcal) Glazed Beef and Broccoli w/ Sweet Potato Glass Noodles, Carrots, Bean Sprouts, Scallions & Toasted Sesame Seeds  beef, broccoli, sweet potato noodles, carrots, bean sprouts,  scallions, sesame seeds, bell peppers, mushrooms, tamari (430 kcal) Raspberry Parfait 
raw cashew, coconut milk, chia seeds, cacao, agave, 
salt, pepita, sliced almond, hemp, goji berry, raspberry (334 kcal)
 Cake Overnight Oats rolled oats, carrot, finely grated, ground cinnamon, allspice, salt, chia seeds, golden raisins, agave, coconut milk, coconut flakes (298 kcal) & Glass Noodles Stir Fry sweet potato noodles, kale. cabbage, carrots, green onion (404 kcal) Steak  flank steak, french yellow

Suite aun upgrade raté nous n'avons plus acces a vtiger. le message d'erreur est : This directory must be writable by the webserver user.

Proper routing in Raspberry Pi and other nodes to reach all nodes from GCS. Debugging network traffic in Command line tool.

I need attached file as Eagle Schematic file for eagle V 6.5 Formfactor is a raspberry board. 65x55mm All Components are smd I need the finished file on: 25.04.2022

I need you to create a python(?) script that runs all the time (on a local machine or webserver) and monitors a NFT collection on the WAX Blockchain. Whenever there is a new NFT listed on AtomicHub marketplace, the script should notify about these new listings within seconds.

> minimum requirement do not use python like script language project must be included with source code server must be nginx with ubuntu

I have a completed vue/node/mongoDB project delivered in a client and server folder. I have basic html/css/javascript competency, and need help on how to get this project set up on my local Windows-based computer and deploy the app to a webserver, e.g. DigitalOcean. Also, I want to be shown how to make basic changes to the app. CSS, labels etc. I guess this is straight forward as I've done it in WAMP/LAMP/JS based projects before, but need a bit of basic training on Vue/MongoDB to get me started. I don't have git experience, but happy to be trained on how to deploy through git if that is the preferred way. Ideally, I would like a Skype session where I am told how to accomplish this.

We are looking to the design a smart water bottle that contains sensors to measure the water content. We are looking for a consumer electronic and IoT sensor expert (you must have expert knowledge of sensors, IoT components, Raspberry Pi, Arduino etc.) to 1. understand the user requirements and design a system block diagram. Then, we will need to 2. select the electronic components e.g., microchips, sensors, displays, and connectors based upon the desired functions, target retail price of your product, ease of availability, durability, and supply chain issues. Then we need to 3. design the schematic circuit board (SCB), and printed circuit board (PCB). We need 4. to generate a bill of materials (BOM). We have product designer who can take over from here e.g., 3D modeling, prot...

looking for some who is able to develop RTSP door phone with Raspberry pi if interested please contact me

> minimum requirement do not use python like script language project must be included with source code server must be nginx with ubuntu

> minimum requirement do not use python like script language project must be included with source code server must be nginx with ubuntu

> minimum requirement do not use python like script language project must be included with source code server must be nginx with ubuntu

Power connections management on a multiple raspberry pi x-y custom-built microscope.

> minimum requirement do not use python like script language project must be included with source code server must be nginx with ubuntu

> minimum requirement do not use python like script language project must be included with source code server must be nginx with ubuntu

Hi Stefan, i saw that you tooke the rol of developing the solution for "Raspberry Pi sending Wiegand data to Wiegand Door Controller"; Have you finished the solution? Marian

Hi Stefan, i saw that you tooke the rol of developing the solution for "Raspberry Pi sending Wiegand data to Wiegand Door Controller"; Have you finished the solution? Marian

I have raspberry pi as a front end for a gaming image which I downloaded and flashed onto an sd card. When I insert the sd card into a handheld console unit, however, I have no sound. The image loads and works, just no sound at all. I have tried altering config txt and tinkered with the sound settings in raspberry pi, all to no avail. Can anyone help?

Project to secure netowork and webserver starting with website security.

4gproxy service with raspberry pi, more details will be shared via chat

I need a standalone GUI - I will need the Pi to boot up to this GUI, I also need to be able to customize logo, and I will need a splash screen at start up with my logo. the GUI will be a simple interface, 5 buttons to control stepper motor distance and a slider bar to go from zero to max distance. the Pi will be just the GUI, I will need an arduino to be programmed at a later time as the slave to control stepper limits, direction. - I have a youtube video of what it is I am trying to do - as wel as where the code is for stepper motors

I am having micro controller based indicator with no printing facility I need a system/software which will collect data from device via RS232 and process them as 1. Pdf file in usb 2. Print-out on any printer I have attached a sample report for the reference

Assistance needed in porting code written for a PIC18F26K to a more modern model (that is in stock). Program is about 400 lines of C, I suspect the model number may need to be changed and a few pins remapped, but otherwise the code is usable. Currently using 1 A...is in stock). Program is about 400 lines of C, I suspect the model number may need to be changed and a few pins remapped, but otherwise the code is usable. Currently using 1 A/D, TX/RX for serial and 4 GPIO pins. The code is doing battery management. If it is less time the code could be ported to Atmel or Arduino if decided, it is not doing a whole lot. Bonus points if you are familiar with Raspberry Pi. This project sends data via serial to the Pi and that also needs some updates. Can discuss that further after this is ...

Tenemos la necesidad de diseñar un Raspberry Pi que funcione como receptor de una señal de una radio en streaming y tenga la capacidad de programar automáticamente archivos guardados en la memoria interna cuando no tenga señal de internet y además poder ingresar al dispositivo remotamente y configurarlo o actualizarlo.

...featured many famous brands from the Beatles to Led Zeppelin to Red Hot Chilie Peppers etc. The theme of the design is as a liquid tribute to Festival Hall. On the back of the bottles it will contain stories on the bands that peorformed there. The logo as near as we can determine is the font chocoladine. The flavours are traditional soft drink flavours such as double sars, creaming soda, raspberry lemonade. The product is going on a aluminium bottle. We have to ablility to print in both metallic and non metallic or both on the bottle. We are seeking a designer to help with an eye catching design that stands out on shelf and captures the essence of the festival hall - ie music / fun etc. The design will need to include the brand name " Festival Soft Drinks" and s...

I need a software to attach it to my webserver that allows me to receive the tracer report frame by tcp/udp/ip and that allows me to forward these reports to other servers simultaneously by tcp/udp/ip, retransmit as received and an option that It allows me to modify data received, change report ID. I am interested in your proposal what I need to receive reports from GPS trackers, these gps devices send text reports to the server by tcp, we have to receive those reports that are usually text frames, each GPS sends the text frame with different communication protocols and those reports we have to forward to other servers, each GPS model forwards the reports to a different server. Insert new gps models in Traccar. It is required to modify the general design of the application and add ...

Receive data from 2*16 display and send to raspberry pi via UART communication.

I need a program on a raspberry pi that will do the following (in these steps) 1. Read the GPIO inputs on the PI (all of the GPIO as inputs), and will display the GPIO number in the console 2. Once step 1 is complete, then the next step is to read a 4 digit number and display it on a 4 digit number readout through the serial port 3. Once step 2 is complete, then we will link the 4 digit number to a MP3 file on a USB or Network attached hard drive directory and play the media through the audio output. 4. Once step 3 is complete, then we need to be able to make a queue of files. Meaning if you enter a 4 digit number, then it will play the file. If you enter another 4 digit number, then it will put that next file in queue. You can put as many files in the queue as you want. Enteri...

...on how i can achieve this So you might need a freelancer who does a little bit of back-end work to connect it to our OneSignal API: He/she should save the ?onesignal_push_id=XYZ parameter in a database, and fire the OneSignal API () for that specific user as soon as a push notification should be sent. This has to be done by your back-end/webserver. WebViewGold only offers the built-in OneSignal API and the ability to deliver the ?onesignal_push_id=XYZ appendix to your WebView URL call. iOS: Just activate the „kPushEnhanceUrl“ option in (by switching the value from false to true) to append the individual user ID via ?onesignal_push_id=XYZ to your WebView URL. Android: Just activate the „PUSH_ENHANCE_WEBVIEW_URL” option in

I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

 Mobile (Native ANDROID&iOS)  Java  SQLLite  WebTechnology  PHP  AJAX  JavaScript  JQuery  WebServer  AWS  WebsiteDatabase  MySQL  Server OperatingSystem  Linux

Objective: I want my new server2 to be almost as fast as I need a good webserver system administrator (cPanel). I'm developing a WooCommerce site and I noticed the admin area was slow when dealing with variable products. I found the following demo WordPress site online that's super fast: (try it yourself with login: demo/demo) So I tried to figure out if the problem was related to my dedicated server with HDD disks, so I tried a new dedicated server (with SSD drive) and later also on WAMP on my Windows 10 personal computer. At the moment I'm pretty sure this problem is not hardware-related. There must be some optimization to the server that we can do to make the backend of a Woocommerce site on my sew server 2 as fast as in demo.woocommerce-b2b

I would like to set up a humidistat controller using an Arduino or Raspberry Pi system. We are trying to control relative humidity in a system for two different experiments. In the first we are aiming for a range of 92-95% RH during the night and 68-72% RH during the day for 12 days; in the second experiment we are aiming for a range of 92%-95% RH for 3 days and then dropping to 68-72% for 9 days. To do this we would need a minimum of 2 humidity sensor inputs across the space (preferably 4 sensors across the space), have these readings averaged, and have the system controlling a 120vac relay that feeds the humidity system.

I need a software to attach it to my webserver that allows me to receive the tracer report frame by tcp/udp/ip and that allows me to forward these reports to other servers simultaneously by tcp/udp/ip, retransmit as received and an option that It allows me to modify data received, change report ID.

We can design application Face recognition Attendance with device using raspberry pi. 1) Add face to Cloud using API 2) with Antispoofing (Live Detection) 3) Recognition from cloud 4) Temperature and pulse data capturing