Nxp rf receiverJobb

I am in need of a seasoned developer with proficiency in working with RF modules and LoRa technology, or similar, to create a system that can compute the distance between two RF modules. I am seeking a skilled developer to create a system that calculates the distance between two RF modules using LoRa technology or a similar module. The system should operate within the 2.4 GHz or sub-GHz frequency bands. Required precision of the measured distance in outdoor environment is 10 meters (can be 100 meters in the first version). If you have expertise in RF communications and embedded software development, I encourage you to bid on this project.

I am looking for a reliable package receiver in west of Ireland who can handle packages. The ideal candidate should be able to receive and process packages with specific items expected. The expected turnaround time for receiving and processing packages is within 1 week. Skills and Experience: - Experience in package handling and logistics - Ability to handle packages weighing more than 10kg I need someone who can receive the packages and hold them, until I get someone to collect it from your place. The products would be something like clothes, electronics, cosmetic items.

...recapture based on predictive modeling. A rough Mockup is provided. Key Elements to Include: 1. Object Tracking: • Show a naval vessel with an initial position and subsequent tracking points. • Use a dotted line to indicate the vessel's path until the point where it "goes dark" and custody is lost. 2. Sensor Network Tasking: • Integrate icons or symbols representing different types of sensors such as RF (Radio Frequency), IMINT (Imagery Intelligence), and SAR (Synthetic Aperture Radar). • Create visual tasking queues or lines from these sensors to the area of interest. 3. Predictive Path and Collection: • Use a colored, transparent cone or a series of grids to represent the predictive model for the vessel's future location. • H...

We are refining our Falcon race timing system for accuracy in the desert, specifically to tracking falcons over a 400-meter course. This system must detect objects (falcon) around 10cm x 10cm, in the outdoor...10cm x 10cm, in the outdoor desert environment Key Specifications: - LiDAR Sensors: - Range: Up to 20m. - Aperture: 180 degrees. - Frequency: 100Hz. - Resolution: 0.32 degrees. - Power: 3W. - Connectivity: Visual display timer and device connectivity for real-time tracking, supported by a battery life of at least 4 hours. -Signal Synchronization: Transmitter at the endpoint and receiver at the start for accurate timing. Operational Environment: The design must withstand the desert’s outdoor conditions, howeverwe dont run the race when there is wind or hig...

I'm looking for an experienced electrical engineer to help design an UHF (Ultra-High Frequency) LPDA antenna. About The Project: - The primary purpose of this antenna will be to work in tandem with wireless microphones, of which I plan to operate between 1-5 at a time. The Ideal Candidate: - Has experience in RF engineering and antenna design - Is familiar with antennas operating in UHF frequencies - Has the ability to optimize antenna design for usage with wireless microphones Please only apply to this project if you meet the above criteria and feel confident you can successfully design an effective LPDA antenna in the UHF range.

I'm seeking an experienced RF design engineer to partner for lab project involving: Design of discrete circuit transmitter with specific RF performance requirement that shall be provided as needed. From the DAC output to RF frequency 5GHz. One stage up-conversion. modeling and simulation of the transmitter signal chain that provides performance details related to link budget RF chain analysis, inter modulation and harmonic distortion using RF/microwave circuit synthesis and simulation software for circuit board and subsystem designers called "Genesys" Desirable Skills and Experiences: - Proven experience in the field of electronics. - Expertise in RF circuit and antenna designing. - Knowledge of medium frequency range (1 GHz - 10 ...

...such as message creation in the channels you're interested in monitoring. 3. **Develop a Receiver**: Write a Python script or application that listens for incoming messages from Slack through the webhook or event subscription. This receiver should parse the incoming messages and extract relevant information such as sender, timestamp, and message content. 4. **Forward Messages to Cortex XSOAR**: Once you've extracted the necessary information from the Slack messages, forward them to Cortex XSOAR using its API or integration mechanisms. You may need to transform the Slack message data into a format compatible with Cortex XSOAR's input requirements. 5. **Handle Authentication**: Ensure that your receiver authenticates with both Slack and Cortex XSOAR ...

I need an RFID solution to manage less than 50 mobile phones stored in key-based lockers. The primary objective is to ensure compliance with our no-mobile-use policy during office hours. Details/Requirements: -...of when the mobile phone is kept inside the locker and when it is taken out, to the server. - The system should generate daily reports to be sent to the administrator with regards to mobile usage for previous day. - The system should be easy to use and does not require advanced technical skill. Skills and Experience: - Proficiency in RFID technology application - Understanding of mobile phone's RF protocols - Previous experience building similar systems - Ability to integrate system with existing hardware (key-based lockers) - Knowledge of office compliance prot...

create new pcb for qtpy and cc1101 rf module in agle and crate ecnlosure for new pcb in fusion 360

I'm looking for an experienced electronics expert to help design a circuit for a consumer electronics device. Key Tasks: - Advanced PCB Design: This will involve creating a complex PCB layout that can accommodate the circuit's requirements. - RF Circuit Design: The circuit will need to include RF components, so experience in this area is essential. Ideal Skills and Experience: - Seeking Electronics Expert with the following skills: Proficient in LTSpice, Multisim, or SPICE. Analog, digital circuit design, power supplies, signal conditioning. Skilled in Altium Designer, Eagle, or KiCad. Knowledge of PCB fabrication processes. Experience integrating optical filters into IR-based devices. Write algorithms for signal processing, and control systems. Microcontroller...

The project will be done in 2 parts , 1- controlling adf4356 rf synthesizer with matlab code and arduino uno hardware. The work will be done and tested on my hardware using TeamViewer. 2- Controlling mcp3424 and matlab in a loop such that the rf synthesizer generates the frequencies from 0.5 to 1.5 ghz with controllable output power. The mcp 3424 module reads those signals. The code for mcp module reading will be provided, which you can integrate in your adf code in Matlab.

I'm looking for an experienced RF antenna designer to integrate an RF antenna into a mobile handheld device Ideal skills and experience: - Proven expertise in RF antenna design - Experience with wireless communication systems - Ability to work independently and deliver results promptly

In this project, you are required to modify the provided MATLAB program to study BSS-based interference suppression in wireless receivers with diversity reception, i.e., receivers with multiple antennas and downconversion chains. Like in the example provided, assume all user signals are QPSK and have the same power level. You will need to write a lab report The full project description and requirements are provided in the attached file. Please don't accept until you look at the description project.

I need a power amplifier designed for a 28nm CMOS technology. Since the maximum power output, frequency range, and target application have not been specified, the freelancer needs to be skilled in various amplifier designs and a...frequency range, and target application have not been specified, the freelancer needs to be skilled in various amplifier designs and also have flexibility to adapt the design according to different project requirements. Ideal Skills: - Integrated circuit design - Solid background in CMOS technology - Experience with power amplifiers -Cadence Design Systems Experience with wireless communication, RF signal and audio processing would be a plus. Please make sure to detail your portfolio and previous experience in power amplifier designs when submitting your...

Vänligen Vänligen Registrera dig eller Logga in för att se mer information.

...telecommunication engineering to conduct an analysis of the line of sight for an RF antenna. The antenna will be positioned in a challenging mountainous terrain and is intended to have a range of more than 10 miles. Potential obstructions in this environment include trees, vegetation, built structures, and naturally occurring topographical features. The successful freelancer will be expected to: - Create detailed simulations or models of the projected RF signal propagation. - Identify any likely signal obstruction or degradation due to the identified features of the mountainous terrain. - Propose optimum positioning or other recommendations to maximize the antenna's functionality. Skills and Experience: - Telecommunication or RF engineering. - Experience in...

...multiple sub-PCs. project setup: 1 main PC connected to mutliple sub PC (all PCs running on Windows). the number of sub PC will be between 1 to 12. project requirements: 1. Data Sender - Make a "data sender" Unity3D program/project that can send UDP data from main PC to 1 sub PC or to all sub PC running a "data receiver" Unity3D program. the number of sub PC will be between 1 to 12. 2. Data Reciever - Make a "receiver" Unity3D program that can receive from the Data Sender. The receiver will infinitely wait for data until it is shutdown. 3. Make a document on how to setup the whole project including all instructions related to firewall exemptions and ports. Key Objective: • The prime task includes setting up a main PC that ...

I'm looking for an innovative designer to create a funky, trendy design for American football gloves. The primary focus should be on the style, rather than the grip or protection aspects. The gloves are meant to be eye-catching and fashionable while still being fit for the sport. Ideal qualifications: - Experience in sports accessories design, particularly gloves. - Demonstrated understanding of American football culture and style trends. - Strong graphical design skills. - Ability to incorporate functionality with aesthetics. - Knowledge of materials used in the manufacturing of sports gloves would be a plus. This project is a great opportunity to bring a unique product to the American football market. I look forward to seeing your creativity shine on this project. Must present ...

I need a power amplifier designed for a 28nm CMOS technology. Since the maximum power output, frequency range, and target application have not been specified, the freelancer needs to be skilled in various amplifier designs and a...frequency range, and target application have not been specified, the freelancer needs to be skilled in various amplifier designs and also have flexibility to adapt the design according to different project requirements. Ideal Skills: - Integrated circuit design - Solid background in CMOS technology - Experience with power amplifiers -Cadence Design Systems Experience with wireless communication, RF signal and audio processing would be a plus. Please make sure to detail your portfolio and previous experience in power amplifier designs when submitting your...

I have a network 30 nodes 5 of them (nodes 1-5) have data to be sent to the receiver which is one node (node 10). Other nodes are relay nodes Each node has 5 different options for Bandwidths to be used and different options of frequency ( for now we can assume just one frequency option 1.5e11 Hz for simplicity and later you have to add the frequency option ) So the model should select the optimal path to the receiver and the optimal Bandwidth and frequency selection to minimize the energy consumption. I already did the mathematical model and I know the behaviour of the model and I need the RL model to have the same behavior. when the maximum cluster size is too small (1mm *1mm), the sensor nodes select a higher BW option ( e.g. 100 GHz) that would consume less energy compa...

I have a network 30 nodes 5 of them (nodes 1-5) have data to be sent to the receiver which is one node (node 10). Other nodes are relay nodes Each node has 5 different options for Bandwidths to be used and different options of frequency ( for now we can assume just one frequency option 1.5e11 Hz for simplicity and later you have to add the frequency option ) So the model should select the optimal path to the receiver and the optimal Bandwidth and frequency selection to minimize the energy consumption. I already did the mathematical model and I know the behaviour of the model and I need the RL model to have the same behavior. when the maximum cluster size is too small (1mm *1mm), the sensor nodes select a higher BW option ( e.g. 100 GHz) that would consume less energy compa...

...distributed DVB-C modulators ... to be generating RF-based UHF signals for cable-TV networks.... - like up to 893x locations so far we might be able to deliver directly by 50 mbit/s each using that DVB-x2 mux as MPEG-TS ... (it is always the same DVB-x2 MPEG-TS mux... but the RF-interface is different....- to be transmitting to the clients receiver ... it can be DVB-T2 as own network.. using a special hardware by the manufacturer.... they will tell us later how they want that MPEG-TS... - but we have even CHEAP dvb-C encoders oder modulators for local CABLE-TV operators... like we have manufacturers being able to manufacture/produce affordable 19" rackmount-kits for even less than 150,- US-dollars ... like having 2x 10GE input ETHERNET and having RF-UHF-...

I'm interested in achieving a comprehensive understanding of the safety evaluation of an RF Plasma device - a topical medical instrument for treating skin inflammation. Specifically, I need in-depth information on: - Compatibility of the RF Plasma device with other treatment modalities. This information is essential to ensure safe and effective concomitant therapies for patients requiring multiple treatment methods. - Understanding the scaling safety of this device when treating extensive surface areas on the body. The availability of reliable data about any potential hazards related to the scale of treatment will significantly contribute to enhancing the device's usage safety. The ideal freelancer should be well-versed in medical device safety assessment, with a ...

I'm interested in achieving a comprehensive understanding of the safety evaluation of an RF Plasma device - a topical medical instrument for treating skin inflammation. Specifically, I need in-depth information on: - Compatibility of the RF Plasma device with other treatment modalities. This information is essential to ensure safe and effective concomitant therapies for patients requiring multiple treatment methods. - Understanding the scaling safety of this device when treating extensive surface areas on the body. The availability of reliable data about any potential hazards related to the scale of treatment will significantly contribute to enhancing the device's usage safety. The ideal freelancer should be well-versed in medical device safety assessment, with a ...

In this role, my expectations include: -J1939 CAN Protocol establishment for a transmitter and receiver in a truck and bus control application -Development of effective and efficient communication software, using the C language to ensure fluidity and stability of protocol -Identifying any existing problems or bugs with the protocol, finding suitable solutions which aid in improving the project's overall performance The desired freelancer should have in-depth knowledge and experience concerning the C language coupled with a keen understanding of the J1939 CAN protocol. Familiarity with truck and bus control applications will be a significant advantage.

We are seeking a talented and experienced RF Engineer with expertise in radar systems. As an RF Engineer, you will be responsible for designing and developing radar systems, from initial concept through to production. Responsibilities: Design and develop RF components and subsystems for radar systems. Conduct system-level analysis and simulations to optimize radar performance. Perform RF testing and validation to ensure compliance with specifications. Collaborate with cross-functional teams, including hardware, software, and systems engineers. Stay abreast of emerging technologies and industry trends in radar systems. Requirements: Bachelor's degree in Electrical Engineering, RF Engineering, or a related field. Master's degree preferred. Pro...

I am in search of a knowledgeable individual to design an RF transmitter circuit compatible with the rx480e module at frequency 433MHz. Importantly, I need the transmitter circuit to be simple yet effective, with the capability to cover a long-range distance of at least 3km to 5km. With 4 chanel. Key Aspects: - Long-Range Communication: The transmitter circuit should be designed to work efficiently over long distances - a minimum of 3km. - Simple Design: The design needs to be as straightforward as possible, without compromising functionality. - Compatibility: The transmitter circuit must be compatible with the rx480e module. The Purpose: This RF transmitter circuit will be instrumental for a remote control system that is able to control a small relay and through that relay...

Hello, I look for a specific company that produced STM32F407 PCB with LAN and 485 ports about 2 years ago, the name of the persons were Ariel and Alan. If new candidates decided to participate, they have to prove that can develop complete embedded systems with STM32, Atmega, NXP, ESP32 as well PCB design, prototype and full production of assembled boards. I'll need the same team for forthcoming projects that I'll post here in Freelancer. The current requirement that will be used ONLY for proving skills: Short project for reading sms from SIM800L with ESP32 and search of a string with password inside the SMS. If password matches, ESP32 should send mail through wifi to given e-mail. C/assembler user for communication with GSM module, for e-mail can use Python. T...

I want to create Google add on, which can be downloaded by different users. Work: to send multiple email to different users with custome message, attachment and title. These data located in Google spreadsheet which contains the field like name of email receiver, email id, title , name of file for attachment, message etc. There is no constraints for paid users while for free users daily email are limited to 10.

Vänligen Vänligen Registrera dig eller Logga in för att se mer information.

...distinct expertise in the C programming language for purposes of writing test firmware for use of RF testing in an FCC lab for an IoT device with BLE, Wi-Fi 4, and CAT M1 capabilities in the North American region. Key Responsibilities: - Primarily, your role will be to write new test cases for the firmware, ensuring exhaustive coverage to prevent potential system breakdowns. Experience and Skills: - Deep understanding of C language and firmware testing is mandatory. - Prior experience in working with consumer electronics is highly preferred. -Deep familiarity with BLE, Wi-Fi 4, and CAT M1 technologies and RF protocols -Familiarity with FCC testing processes/requirements in regards to above RF bands -Familiarity with Git source control - Excellent debugging skil...

I'm focused on an Arduino project that collects data from various sensors and uses Wi-Fi for communication. I necessitate the involvement of skilled freelancers in programming and radio frequency configuration. (EVIL CROW RF V2) is what the device is that needs to be programmed/ a web server controller through Arduino IDE [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions] Specifically, I require the creation of a program that: - Effectively collects data from choosen sensors - Handles communication via Wi-Fi - Ensure smooth data relay from the sensor to the server Skills and Experience: - Proficiency in Arduino Programming - Understanding of radio frequency and how it interacts with Wi-Fi - Previous experience in similar proj...

...Parameters: Public Key (String): (required) Obtained from Ship24Go Integration Menu. Private Key (String): (required) Obtained from Ship24Go Integration Menu. Sender Country (String): (required) ISO Code (Two Letters) e.g., IT. Receiver Country (String): (required) ISO Code (Two Letters) e.g., IT. Sender Zipcode (String): (required) Alphanumeric. Receiver Zipcode (String): (required) Alphanumeric. Sender State (String): (required) Two Letters e.g., TN. Receiver State (String): (required) Two Letters e.g., TN. Sender City (String): (required) Alphanumeric. Receiver City (String): (required) Alphanumeric. Weight (Integer/Decimal): (required) Integer or decimal type. Height (Integer/Decimal): (required) Integer or decimal type. Width (Integer/Decimal): (require...

...We need an addition to the software and application. We need a selection tab for RTCM messages. A tab in the application where the user can select the messages they want to activate. There will be messages that are already enabled by default and those that will be possible to select. This must be present in all software that uses GNSS. Regarding Radio Receivers, we have two models, the Radio Receiver without GNSS, and with GNSS. Only the Radio with GNSS will have this tab and the other will only have the 1008 message selector. ------------------------ These are the RTCM messages we will use. RTCM-1004 "Selectable" RTCM-1005 "Standard" RTCM-1006 "Selectable" RTCM-1008 "Selectable" RTCM-1012 "Selectable" RTCM-1032 "Selectab...

I need a programmer to create a receiver for for end to end monitoring of email infrastructures in accordance to the opentelemetry specification. This receiver will send emails via SMTP every 5 minutes (controlable) and retrieve the emails using a PoP3 account at the same frequency. The key requirements and tasks for this project include but are not limited to: - Generating and documenting metrics and logs from the email process, including: - The number of emails sent - The number of emails received - The number of failed email transmissions - Cycle time for each email between send and receive - for SMTP and POP3: Bytes Transferred, Bytes per Second, Connect Time, Lookup Time (when DNS Name is used instead of an IP Address), Response Time - log messages for

...Booking app with 3 modules (Carrier Module, Driver Module and Admin Module) Platform: Android and Web for now. (IOS later as a separate project). Carrier Module: Enable the carrier to create new trips and created multiple bookings under each trip. Should be able to assign a Driver to each trip. Also need payment Gateway and Whatsapp integration for bookings details to be shared with sender and receiver. I need a password based login, multiple language support, PDF printable format trip details for carrier. Driver Module: Driver should have visibility to the only Trip he is assigned with. He should be able to update the corresponding status of the trip. Driver Specific login details, mostly all details frozen. Admin Module: The master of all the above. You should be knowing thi...

...the receiver. The signal is sent with LoRa. (RFM95 433MHz) The transmitter is powered by 3 AAA batteries or an equivalent battery. The power circuit is replaced with a circuit that draws very little power. see this video Create a Gerber file for the PCB. Receiver The receiver is an ESP32 Node MCU with both WiFi and LoRa. for example Heltec WiFi LoRa 32(V3). The receiver has relays, dimmers for led lights, (possibly a camera) and a button to pair the device. Power from USB. Cost of Gerber file is reported separately. Mating The ESP32 has a web page, which shows the last received signal from the transmitter (button identity). The user can put a name on this button in the web page. The signal is paired to a relay or dimmer on the receiver that

I'm seeking a skilled developer to create a Bluetooth S-Bus PWM module that would enable control of an RC vehicle from an Android application using a long-range class 1 Bluetooth receiver or transceiver W/Wifi Possibly using a ESP32 devise/module Key Components: - Create a Bluetooth S-Bus PPM module - Enable control from an Android application - Use long-range class 1 Bluetooth Rx or Transceiver Primary Functions on App: - Control of the vehicle's throttle - Control of the vehicle's steering Skills & Experience: - Expertise in Android App Development - Proficiency with Bluetooth Connectivity - Background in RC Vehicle Control System Development Turnaround: The ideal candidate will be able to deliver a fully functioning module within a month. The proposed dea...

We are seeking a skilled embedded systems engineer to develop a FlexRay driver for the STMicroelectronics SPC56EL54 microcontroller. Responsibilities: - Design and implement a FlexRa...demonstrate driver functionality, to be developed for SPC56xL Discovery+ Evaluation board. The ideal candidate should have: - Proven experience in embedded systems development. - Strong understanding of FlexRay communication protocols and network concepts. - Expertise in C programming with an eye for clean and efficient code. - Familiarity with MISRA-C coding guidelines is a plus. - Experience with NXP SPC56 MCU architecture is a plus. Candidates with past experience in similar projects are desired. Your bid will be more successful if you can show past work on FlexRay drivers or real-time system pr...

...between $5 and $8 per hour. Buyer and Supplier Sourcing Specialist – Medical Cable Assemblies We are a manufacturer of Medical Cable Assemblies in the USA and we are looking to expand our product offering. I am looking for a Buyer and Product Specialist who can assist me in sourcing and procuring Medical cable assemblies. We also need you to help us create the product line for Medical Cables and RF Cables (help define which models, suppliers, and costs). Responsibilities: As a Buyer & Sourcing Agent for Cable Assemblies, you will be responsible for getting quotes from suppliers in Asia Pacific and the USA for components and finished Medical Cable Assemblies, and for issuing Purchase Orders and doing follow up with Suppliers to ensure OTD and compliance with our qual...

Craft an A4 sized glossy magazine for a special 50th birthday project, designed specifically with the receiver in mind. - Design Focus: The magazine is for a single reader, the person celebrating the birthday, and should be personalized to their tastes and interests. - Available Content: All content, including text and photos, is already available for you to utilize. Your role will be focused on the design and layout, bringing together the materials into a cohesive and engaging format. ( if available please provide historic project references ) - Theme: The overall feel of the magazine should be both personal and luxurious, akin to an exclusive glossy magazine ( JFK magazine, Bazaar, Vogue, Elle Decor.) High end luxury - Skills and Experience: Ideal freelancers should have experie...

I need advice on converting a project from NXP MCUXpresso IDE to CMake. The target operating system will be Linux. Knowledge in CMake, particularly in version 3.8, is crucial. Preferred skills and experience: - Vast experience with NXP MCUXpresso IDE and CMake - Solid understanding of migrating projects between these environments - Familiarity with Linux-based development. - Advanced understanding of Unit testing in an embedded evironment The consultation should equip me with sufficient knowledge to perform the conversion myself. I intend to do this conversion myself, I just need someone experienced in CMake to consult and ask questions. You will not be provided the source files (unless you are an American who can sign an NDA), but you will be able to view them in a live cha...

...2023. Your analysis & presentation should include the following: 1. Sources of long-term funding used by the company. 2. Analyse the mix of (value and proportion) of equity and debt capital available with each company 3. Calculate the cost of capital for both debt and equity for each company and therefore the WACC for each firm. For cost of equity use the CAPM model with risk-free rate @ 6.5% (Rf) and market returns (Rm) @ 13% (Beta to be calculated vs the NIFTY 500 Index using weekly stock and index prices for past 5-years). 4. Calculate, analyse and compare and comment on the working capital & cash conversion cycles for each year. 5. Compare the outcomes across the 5 companies and identify the reasons for differences with specific regard to the capital structure of...

I am seeking an expert PCB designer experienced in EasyEDA for a prototyping project. Since the specific components haven't yet been decided, your expertise in prototyping and experience in working with a range of electronic components will be essential. The project timeline is flexible, and...expertise in prototyping and experience in working with a range of electronic components will be essential. The project timeline is flexible, and thoroughness and quality are more important than speed. Ideal Skills for this Job: - Familiarity with EasyEDA for PCB Design - Proficient in creating prototypes - Knowledgeable about a range of electronic components (Microcontrollers, Operational Amplifiers, RF Modules, etc.). - Excellent communication skills to provide updates and ask clarific...

I'm seeking a seasoned RF system engineer to leverage their knowledge and skills in my project. The individual will perform the following duties: - Design RF circuits - Conduct RF tests and measurements - Troubleshoot any emerging RF issues Past exposure to both wireless and satellite communication systems as well as radar systems is vital, with a particular emphasis on long-range systems exceeding 10 km. This competence will equip the professional to understand the practical and theoretical aspects of the project, thus successful execution.

I am seeking an expert PCB designer experienced in EasyEDA for a prototyping project. Since the specific components haven't yet been decided, your expertise in prototyping and experience in working with a range of electronic components will be essential. The project timeline is flexible, and...expertise in prototyping and experience in working with a range of electronic components will be essential. The project timeline is flexible, and thoroughness and quality are more important than speed. Ideal Skills for this Job: - Familiarity with EasyEDA for PCB Design - Proficient in creating prototypes - Knowledgeable about a range of electronic components (Microcontrollers, Operational Amplifiers, RF Modules, etc.). - Excellent communication skills to provide updates and ask clarific...

...forespørgsel button, it should take you the the forespørsel formular section the page - then the send forespørgsel formular has to be updated so it is the same as it is on alba; se alba here: Note that: afdeling has to be just: Ikast. Remove københavn, odense, aalbor og hjorring. - Note:the forespørgsel formular has to go from a sender email and received on receiver email to be provided. vi) Kontakt os menu: -Kontakt os form is not working. Please test. I will provide send from email and receiving emails -add facebook and instagram -Add Fortrolighedserklæring link in kontakt os page (the present link is a link to alba-automotive page. Can you make this open a Fortrolighedserklæring page, where I will give you the text to the fortr...

I'm looking for an experienced electrical engineer to design a switching circuit that will amplify a 990MHz radio frequency. The operation should be governed with a 0.5v pulse over ...circuit that will amplify a 990MHz radio frequency. The operation should be governed with a 0.5v pulse over 1ms. The key elements of this project to consider are: - Compact Size: The circuit needs to be compact due to limited available space. - 1W Maximum Input Power: The design must be capable of handling a maximum input power of 1W. Ideal skills for this project include a strong background in RF electronics design and a good understanding of compact circuit layouts. Please note that reliability and energy efficiency, while important, should not supersede the need for compactness in this part...

I require a robust Arduino Uno DLMS (Device Language Message Specification) Client Library. It should be designed to foster simple yet efficient communication with Smart Meters. Key Features: - Exclusively supports wired connections, no wireless functionality needed. Supported communication protocols: - RS232 (Recommended Serial) - UART (Universal Asynchronous Receiver/Transmitter) Ideal Freelancer: The perfect freelancer for this job should have a strong background in Arduino and embedded systems. They should also have in-depth understanding and working experience with DLMS/COSEM metering systems and the mentioned protocols. Outstanding proficiency in Arduino programming is vital as effectiveness, efficiency and readability of code is key. Please note, the successful candida...

...camera, while utilizing the Arduino's built-in radio receiver to process PWM signals. Objectives: - Hardware Integration: -- Establish a seamless interface between the LattePanda's Windows environment, the Arduino co-processor, and the FLIR camera. -- Configure the Arduino's radio receiver to accurately decode PWM signals. - Software Development: -- Create a Windows application using the FLIR Atlas SDK (and in the future, the FLIR Science SDK) to issue commands to the FLIR camera (start/stop recording, potentially other functions). -- Develop logic within the application to translate received PWM signals from the Arduino into corresponding camera actions. - Data Handling: -- Implement streamlined data flow between the radio receiver, the Arduino, ...