Esp32 temperatureJobb

...way. [ENGLISH] Pollineramera now needs a website with a register where we can collect all our hives and collect data on what we have done and what we plan to do with them in the future. Customers who rent coupons from us should have the opportunity to log in and be able to access this information. The site should be able to retrieve data from a Buzzbox from OSBeehives that reads the interior temperature / humidity of the cup and sound recording that can be seen / heard on the customer side as well as some other pages and functions. The site needs both a back and a front end so we are looking for someone who is good at both functions and design. Sounds like an exciting and fun project so hear from you at once!...

...concrete way. Pollineramera now needs a website with a register where we can collect all our hives and collect data on what we have done and what we plan to do with them in the future. Customers who rent coupons from us should have the opportunity to log in and be able to access this information. The site should be able to retrieve data from a Buzzbox from OSBeehives that reads the interior temperature / humidity of the cup and sound recording that can be seen / heard on the customer side as well as some other pages and functions. The site needs both a back and a front end so we are looking for someone who is good at both functions and design. Sounds like an exciting and fun project so hear from you at once!...

...accelerator. Our main objectives for this project are: • Research and development specifically relevant to unsaturated polymers • Achieving an optimal medium cure time • Minimizing waste through precise usages of chemicals at specific temperatures Our goal is to achieve the best cure time and minimize waste. However, we’re facing challenges during the winter and rainy seasons, typically when the temperature drops to around 5 degrees Celsius and the conditions become humid. During these periods, we’ve observed that the reaction does not start as expected. We’re unsure about the precise quantities of hardener or accelerator to use under these conditions. We’re seeking your expertise to help us understand how to adjust the quantities of ...

I'm in need of an electronics circuit designer who can create a basic level sensor interface circuit for a radio. Key Requirements: - The circuit is a sensor interface for a radio. - The complexity level is basic, meaning it should be able to perform simple functions like temperature sensing. Ideal Skills and Experience: - Proficient in electronics circuit design. - Experience in basic level sensor interface design. - Understanding of radio electronics is a plus.

I'm seeking a skilled indi...handing over after initial setup. The tasks include: - Watering & Nutrient Monitoring: Ensuring plants receive adequate water and nutrients, adjusting as needed. - pH Level Management: Regular monitoring and adjusting for optimal growth. - Temperature Control: Checking and maintaining temperature settings. - Harvesting & Replanting: Timely harvesting and replanting as per the growth cycle. The ideal candidate should have: - Strong background in hydroponics - Proficiency in nutrient and pH management - Experience in managing lighting and temperature settings - Proven track record in harvesting and replanting in hydroponics - Ability to oversee management of day to day operations efficiently and effectively and troubleshoot. ...

I am in need of an experienced PCB designer who can create a small PCB module with the following features: - ESP32 - SIM module - Gyro - Battery backup with charging port Ideal skills and experience for this job include: - Extensive experience with ESP32 and SIM modules - Proficiency in PCB design software - Knowledge of battery technologies suitable for motorbike use - Understanding of gyro and sensor interfacing - Ability to design a compact PCB (less than 5cm x 5cm) Please provide samples of your past PCB designs in your bid.

...puede ver el funcionamiento de la app actual: La app tiene un funcionamiento básico, Actualmente solo dispone de una pantalla dividida en 6 zonas. En cada una de ellas el usuario puede cargar una foto y/o sonido desde su dispositivo. Esta app conecta por bluetooth BLE con un hardware basado en el controlador ESP32 Por favor, solo coticen profesionales con experiencia contrastable en este campo y queremos claridad sobre lo que incluye su oferta y lo que no. Buscamos empresa con la que hacer una colaboración a largo plazo. Solo atendemos ofertas de profesionales que hablen español....

...for me will be an unpaid logic test. In other words, I would not pay you any money whatsoever if you were to pass the first logic test. However, I would pay you $25 (Twenty-Five Dollars) if you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror ...

I'm looking for an ESP32 expert to help me with a project that involves utilizing both inputs/outputs and write a code in C language The project requires 7 inputs and 6 outputs. - Inputs : Time Temp sensor probe Soil moisture sensor VPD sensor PH sensor EC sensor Water level sensor - Output : 2 x Peristaltic pumps 2 x 12v pumps AC Fan (PWM-controlled EC-motor) 220v water motor pump (using Solid State Relay) inputs/outputs will need to be set up and configured and based on the reading of the input sensors the Microcontroller will control the outputs. The successful freelancer will need to provide the followi...

...whether vs code or arduino ide would be more suitable Complete a project containing the various pages of code, organised and zipped, ready for unpacking and modification/use. //* comment heavily, briefly explaining the features as you go. Use caps lock for anything that requires editor attention or input. Intended for hardware devices: • Xiao Esp32-S3 Sense (I call 'sense') • a small bulb such as this: • ESP32-4848S040C_I_Y_3 (I call '484') • a small speaker, such as this: Each sense should be assigned the placeholder for 2 micro servos. So if a new sense is selected via the 484 at any time, it is assigned a light as well as 2 servos. No functionality is currently required of the servos but the coding should be set up

I'm seeking a seasoned freelancer with substantial experience in ESP32 programming and Nextion Display configuration. Your primary task will be to develop a comforting touchscreen control system that's attention-grabbing and user-friendly. This project requires: - Design and implementation of a multi-level menu structure. The idea is simple: we want users to navigate easily through various menu options without experiencing any difficulties. - Wireless connectivity isn't required. Key Skills: - Exceptional understanding of ESP32 programming. - Proven expertise with Nextion Display setup. -SD Card Read. -PID Control Please ensure your proposal demonstrates your experience with these specific requirements. Looking forward to your applications!

I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM

I'm on the hunt for an experienced developer who can construct a BLE transport layer on an ESP32. Ideally, you should have proficiency in C to execute this project. Required Functionalities: - Reading from a BLE device - Writing to a BLE device - Connecting and disconnecting to a BLE device The TP should be able to handle 5K bytes in one go. The project entails observing conformity with the following Bluetooth protocols and standards: - Bluetooth 4.0 - Bluetooth 4.2 - Bluetooth 5.0 If you are confident with your skills and have experience with BLE protocols and ESP32, please bid on this project. Your expertise will be greatly appreciated!

I am in need of a skilled professional with experience in developing a Mitsubishi PLC program. The program is intended to control equipment using PID (Proportional, Integral, Derivative) control system. It should be able to handle both analog and digital input/output signals. Key requirements include: - Developing a Mitsubishi PLC program for PID control - In...output to 2 inverters for speed control of mixer and small pump for emptying mixer with on/off and speed control on HMI All controls for Speed and heating and cooling to be on separate pages on HMI Heating and cooling on full pid control via HMI with all variable settings available on screen Date and time to be on each HMi page Page 1 Main menu Page 2 Production Overview Speed and temperature display Page 3 + Sett...

...when heat disperse, heat exchange will not be balance. Compression flow must be precision. Must know how a stirling cryocooler works. Must have some knowledge through gas especially density and purity. Pressure generates gas and changes its form. Stirling cryocooler consists of a high pressure compression that compressed the gas back a forward that creates the heat exchange and causes the temperature drop that forms cooling as why it is called cryocooler. Now I have to enter more characters, words as asked in order to have enough so that this can be load through for viewing by freelancers. Gas that makes cryocooler possible are reactive. When they are reactive, they can be put through a debouncing effect that causes cooling different and more advance compare to being c...

...reading a variety of vital signs and sending corresponding signals. This will be the start up phase for the device, which in end phase will be able to detect and alert for other signals like: environmental signals, chemical signals, thermal sensors, motion sensors, and/or communication and GPS signals. Key Features: - The device should have the ability to read heart rate, blood pressure, and temperature. - It should be able to send alert notifications in case of abnormal readings. - The device should also have the capability to send data to a mobile app and a cloud server, allowing for remote monitoring and data collection. Ideal Skillset: - Proficiency in electronics design and prototyping, particularly in the development of wearable devices. - Understanding of medical elect...

I'm in need of a skilled PCB designer to create a design for a straightforward electrical device focused on temperature control. Key Details: - The main function of the device is temperature control. - I already have in mind the components that I need for the device such as temperature sensors, and cooling/heating elements. - The desired temperature range for the device to control is around 40°C. Desired Skills and Experience: - Proficiency in PCB design, particularly in the context of temperature control devices. - Experience in working with temperature sensors and cooling/heating elements. - Understanding of the thermal dynamics and the design constraints of temperature control devices. - Ability to bring this project to life i...

Vänligen Vänligen Registrera dig eller Logga in för att se mer information.

The following features are important for the Smart Thermostat Valve: -There must be temperature and humidity sensors. -For double-sided communication between the thermostat and GateWay, it must be provided with RF 433 MHz communication protocol. -Must be powered by AAA or AA batteries. -Communication between devices should be encrypted for data security. -It should have low power consumption. -All source files must be shared at the end of the project. The Software Gateway requires the following: -Must be able to connect to the internet via Wi-Fi protocol via a Gateway. -The product must be controllable via mobile application. -It should include various automation modes. -The data in the sensors must be tracked during the time they are stored. -All source files must be shared at ...

...3: Common Reasons to Change Insulation Asthma: Upgrading insulation can reduce indoor air pollutants that aggravate asthma symptoms. Allergies: Improved insulation helps minimize allergens and dust particles circulating in the home. Dust Throughout House: Proper insulation reduces dust infiltration, promoting cleaner indoor air. Hot/Cold in Various Rooms: Inadequate insulation can lead to temperature inconsistencies throughout the home. High Energy Bill: Outdated or insufficient insulation contributes to increased energy consumption and higher utility bills. Slide 4: How Most Homes Were Insulated vs. How They Should Be Insulated Illustrate typical attic insulation practices in older homes versus modern, energy-efficient insulation standards. Emphasize the importance of upgr...

...revise my existing pole barn plans to meet the requirements of the Fire Marshal in Louisiana. Key Requirements: - Structural Modifications: The primary changes needed for the plans are structural in nature. These modifications are necessary to ensure the building meets safety standards and regulations set by the Fire Marshal. - Insulation: The revised plans should also include insulation for temperature control. This is essential, as the pole barn will be used for storage and office space. - Ventilation System: Another key requirement is the inclusion of a ventilation system in the plans. This system is crucial to maintain air quality and create a comfortable environment inside the pole barn. Ideal Skills: - Professional Engineering Background: The ideal candidate should have ...

Feel free to ask any questions for clarity. Need assistance to connect my ESP32-2432 microcontroller to my Windows system. With an intermediate level experience, I need guidance and walkthrough for the overall process. The final goal is to create software able to: - Load PDF files stored locally on the microcontroller - View these PDFs - Provide annotation capabilities to these PDFs The ideal freelancer: - Is proficient with ESP32-2432 microcontrollers - Has extensive knowledge in software development for embedded systems, particularly with PDF viewer development - Strong understanding of memory management on these devices - Excellence in explaining technical details and instructions in a simple, clear fashion.

I'm in need of an ESP32 BLE application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific requirements of this project.

I'm looking for a proficient developer to add features to an IoT website. The website receives data from IoT device and provides users visualization of their data. Looking to add features to user access control and push data to IoT device. Freelancer must have ESP32-S3

...that will be used for sales and marketing purposes. The primary task is to remove any existing graphics from the vans, making them appear as plain white vans, and adjust the images for a professional look. This includes modifying brightness, color temperature, and other necessary photo corrections. Key Responsibilities: Remove all visible graphics from the van images, ensuring the van appears plain white. Where featured, retain the "Courier Academy" logo on the van but ensure no other logos or text are visible. Adjust brightness, color temperature, and make general enhancements to the photos to achieve a professional and appealing look. Remove the "Yellow Express" logo and any yellow references on the man's uniform in the images. Follow the styli...

I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...

... an esp32 sending sensor and pin status data) and store the received data in a local CSV file on the phone. Key Feature Requirements: - The app should function smoothly on both Android and iPhone platforms. (priority is android for now) - Ability to connect over Bluetooth with an esp32 wroom module. The Bluetooth protocol may be either BLE or classic, as I am not entirely certain which one this module uses. - Once connected, the app should be capable of receiving sensor and pin status data. - The app should store this received data in a local CSV file on the mobile device for later access. - A simple and functional user interface would fit best for this application. I do not need aesthetic elements or interactive features. - the data will be sent at intervals determined...

Buenos días. Estoy buscando una persona con conocimientos en Arduino, ESP32, etc. Hará falta que tenga tanto conocimientos de programación como para el montaje físico. El proyecto inicial consiste en encender una tira led RGB de 24V a través de un detector de movimiento (LD2410C) y mediante la programación realizada que cambie de color según si detecta o no movimiento. Según los conocimientos del empleado se aumentarán las tareas designadas. Tiempo estimado no más de 3h para la realización del diseño y planteamiento del proyecto.

...when heat disperse, heat exchange will not be balance. Compression flow must be precision. Must know how a stirling cryocooler works. Must have some knowledge through gas especially density and purity. Pressure generates gas and changes its form. Stirling cryocooler consists of a high pressure compression that compressed the gas back a forward that creates the heat exchange and causes the temperature drop that forms cooling as why it is called cryocooler. Now I have to enter more characters, words as asked in order to have enough so that this can be load through for viewing by freelancers. Gas that makes cryocooler possible are reactive. When they are reactive, they can be put through a debouncing effect that causes cooling different and more advance compare to being c...

...to select the best shots - Enhancing colors without making them look unnatural - Adjusting white balance, brightness and contrast carefully - Setting the right temperature and saturation levels - Reducing noise and sharpening the images - Cropping the images as needed Your work should be meticulous and not overly edited, keeping the images looking natural while still making them appealing. Ideal Skills and Experience: - Proven experience in professional photo editing - Proficiency in Adobe Photoshop or similar software - Strong understanding of color correction and balance - Excellent knowledge of brightness, contrast, temperature, and saturation adjustments - Demonstrated ability in noise reduction and sharpening - A good eye for detail and composition - Previous exp...

Proyek nya adalah Membuat semacam Counter pada LCD ESP32-4827S043. Pada layar ada MAIN MENU utk setting : ID, IP, nama,lokasi, tgl dll Alat ini cukup simple fungsi : menerima signal clock/tick/click dari I/O dan menghitung jumlah Click dan menampilkannya pada layar. Dilayar ada icon(Button). Ketika Button diklik data hasil Counting kemudian dikirim(Send) to Cloud sesuai settingan IP

I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.

I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.

I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...

...who can assist me in developing accurate transport equations for solvents in pressure-driven membrane processes. The ideal candidate should have a strong background in membrane technology, polymers, and understanding the impact of concentration and temperature on transport. Key responsibilities for this project will include: - Developing accurate transport equations for solvent and substance transport in pressure-driven membrane processes - Conducting sorption/diffusion analysis in polymers - Examining the impact of concentration and temperature on transport - Constructing and utilizing membrane modules - Calculating flux and selectivity - Analyzing fouling in membrane processes The desired level of accuracy for this project is high, so the successful candidate will nee...

I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a specialized project,...

...devices using Lora technology. Key Project Details: - The project involves simple packet sending between devices, specifically focusing on transmitting GPS coordinates. - You need to be proficient in Lora programming for this project. Previous experience in similar projects is highly desirable. - The sensors that need to be integrated with the Arduino for remote sensing and monitoring include temperature and humidity sensors, soil moisture sensors, as well as motion detectors. Ideal Skills and Experience: - Strong Arduino programming skills. - Proficiency in Lora technology. - Experience with integrating various sensors. - Experience with GPS location data handling. - 1 device is lilygo t-beam v1.2 and the other is Arduino uno with sx1276 Please get in touch if you have the r...

I'm looking for a skilled developer to create a simple graphical user interface specifically for an STM32H7 CPU. The interface is primarily intended for displaying the system's status and temperature. Key requirements: - The interface should be designed to run on the STM32H7 CPU, ensuring optimal performance and compatibility. - The primary purpose of the GUI is to display system status and temperature information. It should do this in a clear and easy-to-understand manner. Ideal skills and experience for this job: - Proficiency in GUI development, particularly for embedded systems - Strong understanding of STM32 microcontrollers and their associated toolsets - Experience in designing UIs for information display purposes - Experience using ST TouchGFX software ...

...software developer familiar with Python and Bitcoin ASIC miners. The core functionality of this software is to control and monitor miner status, including Hashrate, Temperature, and Uptime. Key Skills/Experience: - Extensive understanding of Python - Familiarity with Luxor firmware and pool APIs - Hands-on experience with Bitcoin ASIC miners' processes Scope: - Develop a software application that interfaces with Luxor firmware and pool APIs - Implement functionality to monitor miner status, specifically Hashrate, Temperature, and Uptime - Configure wifi/LAN port of the development board (banana pi r2 pro) - Integrate external temperature sensors and relay control (hardware interfacing is completed already) The complete boot/control/satefy logic are all comp...

I am in need of an industrial aut...experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement these tasks efficiently will high-light your eligib...

Description: We are looking for an experienced electronics engineer to develop a PCB design for a small project using the ESP32 microcontroller. This project involves controlling both Line In and Line Out audio through an amplifier. The schematic for this setup will be provided to you. Project Details: Microcontroller: ESP32 Functionality: Control Line In and Line Out audio via an amplifier Additional Component: Integration of an MP3 module, which is to be triggered by AT commands and also through Serial communication. Deliverables: Complete PCB design files ready for manufacturing, including Gerber files, BOM, and assembly drawings. Requirements: Proven experience in PCB design and electronic circuit design. Proficient in using PCB design software (please specify which s...

I'm in the final stages of a project involving Esp32 and ebyte LoRa modules. My main issue is the unreliability of the network connection and the slow data transmission speed. I need an experienced professional who can help me optimize these aspects to get the project completed. Key requirements: - Strong experience with programming and coding for Esp32 and ebyte LoRa modules - Previous experience in troubleshooting connectivity issues and optimizing data transmission Please reach out if you have demonstrable experience in this area. Must be available to work on project immediately and have it completed within a few days.

Vänligen Vänligen Registrera dig eller Logga in för att se mer information.

I'm looking for a skilled Arduino/PCB designer for my course project which has following features: - Switching ON/OFF power light: I'd like to control this using screentouch. - Temperature measurement: I'd like the device to measure the temperature in a room and display it as a numerical reading on a screen. All the above features should have battery power, just like a smartwatch. The ideal candidate should have experience in Arduino and PCB design, as well as a good understanding of power management and temperature sensing. If you're confident in your abilities and believe you can bring this project to life, please reach out.

I am looking for a capable and experienced machine learning expert to help me create a comprehensive weather forecasting program. Key Features: - The program should analyze data on temperature, humidity, precipitation, and amount at windspeed - The selected machine learning model for this project is Random Forests. - Expected application: Weather prediction for various purposes. The ideal candidate for this project should have: - In-depth knowledge and experience in machine learning, particularly in the application of Random Forests. - Familiarity with weather data and the intricacies of weather forecasting. - Strong problem-solving skills, as the program will need to handle a range of complex data. I look forward to working with a professional who is passionate about creating r...

I'm seeking a skilled WordPress developer to enhance my product page by changing its layout and adding custom fields. Your primary task would be to i...attributes to list in 2 columns. - Adding custom fields: Introduce new fields for product data that is not currently displayed in the default layout. I have added the necessary attributes, but they aren't pairing when I try to upload my CSV. - Importing CSV file: You'll have to import a CSV file containing a wide range of attributes for each product. These include aliases, botanical name, minimum temperature, and zones, among others. Ideal skills for the job: - Proficient in WordPress. - Experience in customizing product pages. - Able to work with CSV files and import data accurately. - Familiar with implementing cu...

...which measures temperature and humidity and displays the values on an LCD screen. The system is based on one or more Arduino boards and addiƟonal components. Design the structure of the system, select components and sketch the structure of the system soŌware. (Based on Arduino Project Handbook by Mark Geddes, 2016) Note: Not all details are specified in the descripƟon. For instance, we don’t know where exactly the system will work, how it will be powered (baƩery or grid), and how oŌen measurements will be taken. Resolving these issues is leŌ to you as the designer of the system. However, remember that each design decision requires a jusƟficaƟon. 3. General idea of the soluƟon: For such a simple system, one Arduino Uno board will be sufficient. To measure both humidity and ...

I need a skilled microcontroller programmer with experience in working with the ESP32 specifically. The main aim of this project is to control and navigate drones using the ESP32. The ideal freelancer for this project should have: - Proficiency in ESP32 programming - Experience with drone control and navigation - Knowledge of wireless communication protocols - A solid understanding of microcontroller systems - Previous experience with similar projects would be a plus The project will entail: - Developing a reliable system to control and navigate drones using the ESP32 - Ensuring the system is responsive, stable, and capable of managing a drone's movements effectively This project requires attention to detail and a high level of technical expertise. Pleas...

I need a talented developer to assist in integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus using the CAN @ 1mbps - Toolset: I require the project to be developed using the Arduino using Arduino tinymovr library. The ideal candidate for this project will have a background in microcontroller programming, specifically with the ESP32, and demonstrable experience with motor control. Prior experience with the CAN FD protocol and the Arduino framework will be highly beneficial.

obtain measurements of speed, fuel level, engine temperature through CAN BUS, that is, I need to communicate with the car's ECU