Dodge charger srt8Jobb

I'm looking for a logo for my battery and charger company that does service. I'd like to go for a classic and timeless style, so no specific colors or symbols are necessary - just use whatever creative ideas you may have! What is necessary, though, is that the logo must include my company name. Make sure to keep it classy and timeless while displaying the brand name! Thanks in advance!

We are looking for a talented individual to create a Super cap charger circuit board layout for us. We want to take our current external 4xAA battery pack which contains a USB port and on/off switch and replace it with a super cap (maybe a 5VDC Super cap ) charger directly connected to a 5V product that currently plugs into the USB port. The super cap needs to have a USB charge port and an on/off switch to turn the cooler fan on and off. The size of the board can only be 32 mm x 57 mm and height of 16.5 mm with just the leads to the 5V product and it should incorporate a combination of both through-hole components (on/off switch on bottom side of circuit board) and surface-mount devices (USB female port for charging super cap). We are open to suggestions when it comes to the ...

We are looking for a talented individual to create a Super cap charger circuit board layout for us. We want to take our current external 4xAA battery pack which contains a USB port and on/off switch and replace it with a super cap (maybe a 5VDC Super cap ) charger directly connected to a 5V product that currently plugs into the USB port. The super cap needs to have a USB charge port and an on/off switch to turn the cooler fan on and off. The size of the board can only be 32 mm x 57 mm and height of 16.5 mm with just the leads to the 5V product and it should incorporate a combination of both through-hole components (on/off switch on bottom side of circuit board) and surface-mount devices (USB female port for charging super cap). We are open to suggestions when it comes to the ...

I need a videographer in Geneva to shoot a simple green-screen testimonial/interview video. This will be a one-day shoot (5-6 hours). Below is the list of requirements for the Video Shoot: - 3 x FS5 or similar camera with lenses and tripods (wide Angle & Closeup Lens) - Sennheiser microph...requirements for the Video Shoot: - 3 x FS5 or similar camera with lenses and tripods (wide Angle & Closeup Lens) - Sennheiser microphone or lapel mic for Audio recording - 1 Teleprompter - Simple light set up for green screen interview video - 9ft tall Green Screen Cubicle (Background + Floor & One Side Covered) All other minor accessories required for a green screen shoot - 1 Laptop with Charger for Zoom Video Call - 1 Speaker to hear Zoom Audio The budget for ...

I'd like to have an animation about energy sharing between the charger and the other consumption of the household. There is a car charger in a house. The car is connected to the charger and charging. There is also an "intelligent system" a software module in the charger which can monitor the consumption of the household consumers like microwave oven, washing machine and so on, and control the charging energy based on the maximum capacitance of the system and the actual usage by the household excluding the charging. The animation should show at least two cases but it can be a continuous process. I've attached some pictures which may describe this better. It would be important to show somehow the current flow and the amount of current which ma...

...no’s 13. Digital Input (switch) for Volume control (increase and decrease) - 2nos 14. Digital Input (switch) for navigation keys - 3nos 15. Digital Input (Tactile switch for box open/close) - 1nos 16. Display: E-ink display with touch (in case without touch separate touch control module shall be used), appropriate part to be selected. 17. HDMI 2.0 Interface. 18. UART/SPI Interface for Battery Charger module connectivity Ideal Skills and Experience: - Experience in schematics development for GPU modules, specifically nVidia Jetson Orin Nx. - Strong knowledge of Audio & video processing capabilities and implementation. - Familiarity with designing carrier boards - Good understanding of power management. - Ability to create custom form factors based on project requiremen...

...in 3-5 days. If you can just use basic 2d art that you can find online for the components? The game will need to be responsive for mobile and desktop. Idea: The aim is simple; players must get as far down a snowy slope as possible without crashing. Users will tap and hold left and right sides of the screen to avoid different obstacles, and the gameplay will get faster making objects harder to dodge. Here is where the idea comes from https:// Controls: Our controls will be two simple instructions. Tap and hold either the left or right of the screen to direct your Speedy Santas. Desktop players will use their keyboard arrows. Moving down the slope is automatic and speeds up over time. Gameplay: The game is set in the snowy north pole with snowmen, yetis

...There will be listing to the type of Electrical charger and for which type of cars - The voltate and ampire will be specified - You can signup with Google, Apple ID and email. - Once logged in to app, you will add your car and its speficications to match charger locations. - You can plan a trip with this app to find during your journey charging places. - There will be two type of listings, map and normal listing - Start your bid with read and agree so that I know you really read my post. - Through tis app, you can pay to charger owner to his own account in the app. - Through the app, you can nivigate to the charger location and show map also - There will be description to the charger type and specification - There will be reviews to the charger ...

I am looking for a talented logo designer to create a modern and minimalistic logo for my new mobile accessories brand. This logo will be the face of my brand and should reflect the sleek...easy to be read. 2. Logo shoud use the name but also can be acompained with a symbol. 3. Fonts should represent the mood of the business. You can alter the text to make text based logo. 4. Final design should be submitted in Adobe illustrator files which can be opened in version 2015. Don'ts: 1. Please do not submit a complicated design. 2. Do not copy from internet. 3. Do not use charger, cables, electricity etc. as a symbol Brand Detail: Name of the brand is BRASON ( its a combination of surname BRAR + SONIDO [SOUND in English] buts its not just limited to sound only. Sta...

...Lacto Rick. Colliding with these will result in losing a life or ending the game. Power-Ups: As Lacto Rick collects "Oral Boosters," he gains temporary abilities like a speed boost, magnetic attraction for easier collection of items, or a shield for invincibility. Special Modes: Occasionally, Lacto Rick can enter a "Warp Zone" where everything slows down, making it easier to collect items and dodge obstacles for a limited time. Additional Features: Leaderboards: Display top scorers weekly and offer in-game or real-world rewards for high achievers. Unlockables: New spaceship skins or even new characters can be unlocked by reaching specific milestones. Educational Tips: Integrate oral care tips or interesting facts about space and dental hygiene as players...

I am looking for a freelancer who can help me connect to ABL elec...who can help me connect to ABL electric car chargers eMH1 and read charge sessions. Here are the project requirements: Electric Car Charger Type: - The chargers I have are ABB chargers. Software Interface for Managing Charging Sessions: - I need a software interface for managing the charging sessions. Preferred Programming Language: - I am open to any programming language. Ideal Skills and Experience: - Experience working with ABB electric car chargers. - Strong knowledge of software development and data extraction. If you are confident in your ability to connect to ABB electric car chargers and extract charge session data, please bid on this project. Charger product page:

I am looking to get custom diecast cars created in a 1:24 scale. Specifically, I am interested in a Dodge Challenger with moderate levels of detail and customization. I want the car to be as accurate as possible, while accurately representing the shape and dimensions of a real Dodge Challenger. i am NOT looking for an online animation, the car must be real and shipped over to me. The car needs to be of a high quality, with the diecast colors and details added with precision. I’m looking for intricate details like windows, windshields, bumpers, tail lights, wheels, grilles, seats, logos, etc. Also, I would like a simulated interior with steering wheel, stick shift, dashboard, and gauges included. In addition, I would like for the car to include some minor customizat...

I am looking for an animated YouTube intro with a specific theme and a length of 10-20 seconds. I have a clear idea of what the intro should look like, so the freelancer should be prepared to design something according to my instructions. The animation should be of the hig...something according to my instructions. The animation should be of the highest quality with a bright colour palette, attractive font, and sound effects. I would also like the freelancer to be available for additional edits to the intro if necessary. The project should be completed in a timely fashion and with a professional attitude. I would like an animated drifting video with my green hellcat charger and my company logo Color Talk LLC on the ground like this sample video on this link: [Removed by Freelancer....

...from Bangalore india to redesign an existing Battery charger to more optimized design with latest technology and parts because our existing. Charger is outdated. this should have 2 isolated 12-volt, 7-amp outputs, Works on all types of 12V VRLA, AGM, flooded and gel lead-acid batteries, it will Recover, charge, maintain and de sulfate 12-Volt batteries. The project requires the following skills and experience: - Should be expert in power convertor design. - Should have knowledge in embedded system programming. - Experience in designing and developing battery chargers for lead-acid batteries. - Knowledge of battery charging algorithms and techniques. If you have the necessary skills and experience to develop a smart battery charger for lead-acid batteries, pl...

We are looking for an experienced PCB designer who can create a high current and voltage monitor for a range of 18v to 120v DC and 5a to 200a and can handle multiple input sources. The design should accommodate three DC inp...converting to 48v and it can be forwarded to OUTPUT-3 after converting to 54,6v. That means this port will have 2 relais switches. Forward depends on the other conditions. OUTPUT-1 (output for induction heater): All forwarded power will be reduced to 48v 3500w OUTPUT-2 (go to second system): Will not have any reduction and power will be forwarded straight forward. OUTPUT-3 (output for battery charger): All forwarded power will be reduced to 54,6v 5a Relevant skills: - PCB design - Multiple input sources - Electronic components - Attention to detail - Probl...

I'm looking to get a logo made for an auto care and detailing gig I'm going to pursue. I have a 1946 dodge truck I want incorporated into the design. Open to color ideas. Looking for something to use on webpages, clothing, some merch, etc... I tend to lean towards a vintage/retro look but am open.

I am looking to have a car wrap designed for my truck. We are a Radio station and the design is to promote the radio station. Although I don't have an exact design finalized, I do have some ideas on what kind of look I am going for. I am looking for a unique and vibrant design that will stand out and catch people's attention. The model of the truck I have is a Dodge Ram 2010 I need the wrap design for this truck. PLEASE SEE THE ATTACHED IMAGE.

I am looking for a CAD drawing of a generator I need building, I have a few images of what it needs to look like. It is only a concept it doesn't have to be perfect. I have added a picture of the generator and a picture of the charger. I need a drawing of the charger attached to the side of the unit. Ideally i need this one pretty quick. I would like to have a 3D visualization of the generator to be able to get a better idea of how it would look. The drawing should be accurate and show the prototype of the generator. If you have any experience in designing or visualizing generators, please feel free to submit a listing on Freelancer.com for my project.

Realization of a graphic design for a charger page following our instructions

I need a novel EV charger made with a futuristic look with an app to go with it for custom charging. I also want it to have an LCD screen with various parameters on it. It should have wireless connectivity and Bluetooth for monitoring purposes with an app suitable for both iOS and android phones worldwide. I need a CAD design and then I will look into prototyping. The electronics should use PCB chipboard. I would like to incorporate our brand called “eco ev+”. It should be able to survive all weather conditions, especially those for worst case scenarios. I am looking for a freelancer to assist me with a 3D modeling project. The ideal candidate should have experience in 3D modeling and be proficient in various software options such as AutoCAD and SolidWorks. However, I d...

I'm looking for a logo designer to create a unique, eye-catching identifier for my newly-launched technology enterprise. It ne...for my newly-launched technology enterprise. It needs to be remarkable and instantly recognizable; I'm looking for an experienced designer who can take these preferences and craft a truly memorable logo that will reach my desired audience and give my enterprise a strong impression. The business we are thinking of is mainly for Electric Vehicle Charging, including selling and installing the home charger, installing and operating a commercial charging network and online selling of EV accessories. Our vision is to do our part to make this world more sustainable by using as much clean energy as we can. Our company name is iEV, the logo will need to s...

Unreal Engine 4 _ Enhanced Feature's Project by Paranes Games

I am looking for an experienced freelancer to complete a Powerline Communication project. The purpose of this project is for an EV Charger. I am open to suggestions so the freelancer has the creative freedom to draw up the requirements accordingly. The timeline for this project is moderate at 3-4 weeks. I am looking for someone who has previous experience working on powerline communication projects and is confident they can deliver the results I need within the given timeline. If you believe you have the required experience and expertise to effectively complete this project, please provide your proposal.

I need some artistry for my website. I sell EV chargers and I want a banner. The homepage is

I am looking for a freelancer who can develop a 12V@2amp lead acid battery charger. Input Voltage: The charger should have a universal AC input voltage. Charging Technology: I am open to different charging technologies, including conventional, pulse, and trickle. Charging Time: The desired charging time for the battery is standard, which is between 4-8 hours. Ideal Skills and Experience: - Experience in designing and developing lead acid battery chargers - Knowledge of different charging technologies and their applications - Proficiency in working with universal AC input voltage - Familiarity with battery charging time optimization - Ability to deliver a high-quality and efficient charging solution within the given time frame.

I am looking for a design for a Universal Solar Grid Hybrid EV Charger. There will be dual source input 230V, 50Hz Grid and Solar 90V - 150V DC input. Desired Output Voltage and current: - Dual output of 60V DC @ 15A and 72V DC @ 15A together Charging Speed: - Fast Charging, with a desired charging time of 1-3 hours EV Connector Type: - CCS Combo 2 (Combined Charging System) Skills and Experience: - Experience in designing EV chargers - Embedded system design and development of Hardware schematic, pcb, bom, Firmware code development and prototype testing. - Knowledge of different EV connector types - There should be OLED display and RS485 communication to remote. - The charger should design with suitable alarms, protection and trip mechanism to ...

As discussed, we will follow the design document "Final Spec EV Charger-22.09.2023" shared by you. We will complete the task in 5 - 6 weeks. Deliverables: 1. Design source files Schematic 2. BOM 3. PCB design Altium files 4. Firmware source files 5. Support during prototype development

Project Title: Power Electronics Based Hybrid MPPT Charger Embedded Design with solar and grid input and give 48v dc output for battery charging as well as to dc load. In addition to yhat 230v, 50hz ac inverter output also required. The block diagram indicating the power flow requirements is given as attachments. Only experienced team can apply. If don't have experience and expertise as well as don't have team, please don't apply. The freelancer needs to submit all the design source files in Altium for schematic, pcb, bom and the firmware development source file foe embedded code. All these design works needs to be validated by us through working prototype model, so necessary support needs to extend by freelancer. The milestone payment will be released after sucess...

I need someone to design a solar charger that has an all-in-one solar panel with 12v 25000mah battery. This device will be used to power off-grid electronics and needs to be compatible with a proprietary electronic board that connects with 2 wire over screw terminals. The unit works on 12vdc 0.5amp or can work on 24vdc as well. I'm open to either 12vdc or 24vdc. I require the charger to have a standard charging time of 4-6 hours. It should have the option to be connected to constant 12v/24vdc so the solar panel/battery acts as an emergency UPS unit that starts working only if the power was cut to it. The successful candidate should have experience in designing solar chargers and understand what components and features are required to satisfy this project’s re...

-Make new service webpage: Electrical survey -Make new service webpage electrical maintenance✓ -Make new service webpage new construction ✓ -Make linkable from main webpage under "services" with picture as per existing others. -replace pictures in electrical service upgrades page with provided -add industry oversight award to main page✓ Replace Cbrb logo 2023 to main page✓ Make s...service webpage electrical maintenance✓ -Make new service webpage new construction ✓ -Make linkable from main webpage under "services" with picture as per existing others. -replace pictures in electrical service upgrades page with provided -add industry oversight award to main page✓ Replace Cbrb logo 2023 to main page✓ Make sure it looks good mobile Change picture on services page for electri...

Arduino IDE codes must be written for our project, which will be implemented with one of the ESP-32 or STM-32 or nano iot 33 processors using the Arduino OCCP1.6 library. There will be a server connection via Ethernet and Wi-Fi connection. There will be OTA support. Schematics and PCB drawings were made. The charger, which will have a 3-phase 22KW power, will show current, voltage and drawn power values ​​on the screen. Other details will be communicated later.

Hi , Considering to low power consumption and high power efficiency I propose: -. use a high power efficiency of the charger controller like bq24560 - .Active diode instead of the passive one -. Latching relay as you mentioned or low power loadswitch -. Low power microcontroller like stm32 or atmega -. Synchronous switching buck converter, _. Etc I can design the board in 4 layers and double side Thank You - Hendra

I’m looking for a creative and experienced engineer to design a Faraday Cage with a wireless phone charger inside. The cage needs to be small enough to fit one phone, at minimum needs to have a lining of of copper, or aluminum, and feature a flat pad charger. The ideal candidate will be able to complete the project quickly, accurately, and cost-effectively. I'm excited to see the creative ideas you come up with for this project.

I am looking for a freelancer to design a battery charger with schematics and a PCB. The charger needs to have a low voltage cutout and shutdown notification feature. Design done on KiCad or in Proteus. Design files needed. Requirements: - Input voltage range: 15V-24V - Battery type: Lead Acid - Additional features: Overcharge protection The charger should use CC, then bulk, then float. It will operate at higher temperatures (typical 45degC) It should take battery temperature in concideration to prevent overcharging The supply voltage is typically 24V and 2 diodes should connect the load so that power transfer is automatic when 24V falls away. Need to have fuses etc to ensure safe operation Load can opperate down to 10V and up to 32V Battery will be 7 or 14Ah 12V lea...

I am looking for a product design engineer with experience in electrical engineering. Skills and Experience: - Proficiency in electrical engineering and product design specially in usb cable, wall charger and car charger or any of these> - Ability to develop requirements for the design - Experience in designing products for industrial use The project involves designing a product for industrial use. The client needs help in developing the requirements for the design. The ideal candidate should have a strong background in electrical engineering and be able to create a design that meets the client's specifications.

We are looking for a graphic desinger for some logos and icons on our website here is the preview of our website: We need these graphics done: [Graphic of Volt Station] [Graffic of Tapping a Card] [Graphic of screen saying charger returned, length and price charged] We have the graphics for the machine and our logo, you mainly just need to edit what is on the screen, add tapping the card.

Good day! We need a Flutter Developer to create an ap...made. CURRENT LOCATION should be captured and sent in API request, along with data for that specific button. A local notification should load, showing success / failure status of API request - NOTIFICATIONS -- Firebase Token will need to be generated on each device -- Show push notifications in Android / iOS notification BAR + also show in the widget on the home screen -- Charger will be always connected to device. When charger is disconnected, app will show notification + send alert to admin via API call. Picture from front camera should also be taken and sent as part of API call ** If JWT Token is expired, perform auto-refresh to get new token. If it fails, logout the user and go back to login screen. This will apply ...

For Installers: - Operate a marketplace specifically designed for charger installers - Offer a charger management system to help installers manage their client relationships - Utilize an installer application to streamline operations For Customers: - Provide a user-friendly platform for comparing the values offered by different installers - Enable e-commerce capabilities for purchasing charging-related items For Enterprise Users: - Supply system management software tailored for enterprise needs After-Sale Services: - Engage in after-sale activities to maintain customer and installer satisfaction For Installers: 1. Marketplace Development: - Language: Preferably JavaScript with Node.js backend

I am looking to have engineered drawings made up for installation of a DC fast charger. Site has 480v 3p 3w delta system with two open switches on the switch gear. There are two unused 200amp switches on the switchgear. Would like to dedicate one of these switches to feed charger. Charger AC input is 138amp nominal and 152amp max @ 480v.

The blender file only has one ev charger. The remaining 3 are missing. I would like those files asap. Also kindly remove the ev charger from your profile asap. All I am asking for is the source files for all 4 chargers. You did not need to block me. I paid for those files and trusted you sent them.

I am looking for a freelancer who can create CAD drawings for an already designed EV charger. The project requires both 2D and 3D drawings using AutoCAD software. The freelancer will need to determine the dimensions and specifications for the design. Ideal skills and experience: - Proficiency in AutoCAD software - Experience in creating both 2D and 3D drawings - Ability to determine dimensions and specifications based on the existing design

Hola Dani, como estas? En esta ocasion tengo un proyecto para ti que consiste en crear un Dodge TA2 para Assetto Corsa, al proyecto le puse Dagger que es el nombre de fantasia que vamos a usar. Tengo un modelo de base que podemos usar como referencia y unas cuantas fotos.

I am looking for a designer to create a postcard (Vertical 5x7) to promote my airport shuttle/Taxi service to local residents. The postcard will serve as a promotional tool to increase awareness and generate new customers. Target Audience: - Local residents who are in need of transportation to ...design desired. This will be back/Front design. Front: same design just add our company's Logo (Attached) strategically and change telephone number to (800) 790-9089. Logo's color must match postcard's color. Back: Same design as front but the promotion will be for Airport Shuttle service having planes or plane in background. *Complementary bottle of drinking water *Cell phone (Iphone/Androide) charger available Active/Reserve military and DOD employees welcome. *20% Mil...

I am looking for a Freelancer to retouch-in two pieces of a charger wallbox onto the wall. Object addition will be part of the retouching process, and I will provide detailed instructions as to how the final product should look. The preferred format for the final image is JPEG. I am interested in working with experienced people who have expertise in color correction, object removal, background enhancement, and Object addition. Quality is half-way important for this project. If this is a project you would be interested in working on, please let me know. Thank you!

We are looking for an AI expert to create an AI model for custom photo editing. The objective is to create a high resolution photo of your eye, through 6 photographs. These 6 photographs are in high quality but have a flash, which must be removed and retouched to achieve the result of the attached image. Also I add a...1. We have eye photos 2. We have a photoshop script to have it as an example of what the edition can do with more tools in the Adobe platform. 3. We need to create an AI model for editing them In this file there are 14 steps to auto edit created for Photoshop. Let’s reuse this to start for something. The edition need to be based on this tools used for the moment: -Move Tool -Crop -Brush Tool -Dodge Tool / Burn Tool -Layer Masks -Zoom In/Out -Spot Healing Brush ...

Logo Design for EV Car Charger Brand - Project Title: Logo design for trademark (brand name) of EV car charger - Brand Name: [EVrais] - Logo Style: Modern - Preferred Colors: Maybe Blue and green Ideal Skills and Experience: - Graphic designer with experience in logo design - Strong understanding of branding and trademark requirements - Proficiency in creating modern and minimalist designs - Knowledge of color theory and ability to incorporate blue and green effectively - Creative thinking and ability to bring a fresh and unique perspective to the logo design process

I a...name for my EV charger product. The target audience for this product includes both homeowners and businesses, so the brand name should appeal to both groups. Ideally, the brand name should convey a sense of modernity and innovation, as well as being related to EV or green power. I am open to suggestions and would like the freelancer to come up with ideas based on the project description. Skills and experience needed for this job include: - Creativity and ability to come up with unique and memorable brand names - Knowledge and understanding of the EV industry and green power - Experience in branding and marketing in businesses Overall, I am looking for a brand name that will resonate with businesses and effectively convey the modern and eco-friendly nature of my EV cha...

I'm looking for a creative and unique brand name to represent my product, an EV fast charger. I'm open to any length of name, and I'd prefer something abstract rather than words related to my industry. and This brandname or trademark is not registered, I'm eager to see what the users of Freelancer.com can come up with. Let your creative juices flow and share your ideas with me! It's an exciting project and I look forward to the possibilities. Thanks in advance for your help!

Origina...Istruzioni per l’uso NL – Gebruiksaanwijzing PT – Instruções de Utilização SE – Manual PL– Instrukcja użytkowania CN – 使用说明书 Here is the instruction that needs to be translated also to same languages: Contents of the Box • Sensor unit [1] • Long alignment guide [2] • USB-Charger [3] First use Remove plastic films from the screen and both sides of the alignment guides and charge the device according to instructions below for two hours before first use. Charging the Device To charge the device connect the USB cable [3] to a charger and the sensor unit [1]. Only use chargers with markings shown on figure [4]. Charging the device makes you the operator of the device. Software auto trans...

I am looking for a skilled mobile app developer to create a unique app for my portable charge bank. The app needs to be available on both iOS and Android platforms, and must feature a location tracking function for the portable charger. In terms of design and colour, I'm open to suggestions from the developer. The finished app should include the ability for users to track the battery status of the paortable charger, view usage statistics & history, and have the option to change the settings as necessary. I am looking for an experienced developer who can efficiently create a high-quality product. The app must be user friendly and aesthetically pleasing. Once the app is completed, I want it to be ready to be released on both the iOS App Store and Google Play Store. ...