Design conveyor trussesJobb

I'm in need of a skilled professional to help restore my wood truss that has been affected by moderate structural damage due to physical impact. Key Requirements: - Experience in structural restoration, particularly wood trusses - Must be able to assess the level of damage and the repair needed - Understanding of the potential safety implications of the damage - Ability to work with precision and care to ensure the repair is thorough and the truss is restored to its original strength

I need a structural engineer with experience in modifying roof trusses to incorporate access stairs to the attic. My requirements are: - Attic space is large with 7'9" ceiling with no current stair access. - Location of the stairs is not a concern. They can be situated anywhere in the attic. - The stairs don't need to have specific features such as built-in storage, a folding mechanism, or non-slip stair treads. Please provide evidence of previous projects you have completed that are similar to these requirements. A willingness to brainstorm practical and aesthetically pleasing solutions would be appreciated.

I am seeking services of a knowledgeable professional in creating detailed, stamped construction plans for a premade metal-over-wood carport in Aurora Colorado. This single-vehicle carport's intended use is for vehicle protection. The chosen roofing material is metal. 2x4 Wood was added to the under carriage for added strength and attached to the metal rafters, ridge, beams, and trusses using Simpson strong ties and brackets. Will probably require an onsite evaluation to get the jest of the assembly. Ideal Skills & Experience: - Licensed in the state of Colorado - Experience in drafting construction plans - Proven experience in designing carports, particularly with metal-over-wood structures and corrugated metal roofing - Knowledge of local building codes and regulations...

I'm in need of an expert with experience in truss drawings and blueprint creation specifically for residential homes. The purpose of these trusses drawings/blueprints is for a building permit application. The crucial aspect for this work is calculating the snow load that the roof can bear. This is a vital part of the project as it will ensure the safety and durability of the structure. Potential freelancers should have: - Experience in residential construction - Expertise in truss drawings/blueprints - Proficiency in understanding and applying the Local Building Code in calculations - Solid knowledge and skills in performing snow load calculations For the proposal to be considered, please include examples of similar projects you've completed and any relevant certificatio...

...structural engineer to take on a project involving the design and analysis of a residential building. Key responsibilities for this project include: - Drafting accurate structural designs – this includes producing detailed plans in a timely manner - Analysing structural components to ensure they satisfy our functional requirements and adhere to the latest local building codes - Requiring slab design, wind bracing, tie downs, and truss connection detail to existing trusses, steel beam over large external door, garage lintils and window lintils, specifications referencing Australian standards Your application must demonstrate your skills, experience and: - Past successful residential building projects - The use of the latest design and drafting t...

...require an experienced engineer who can help finalise processing plant set up. This plant will be processing gold ore, and the ideal candidate should have significant experience with gravity separation methods. The plant is currently a diesel powered impacter hammer crusher gravity feeding 2 Knudsen concentrators. Looking to implement dewater with cyclone set up, and close the circuit with conveyor back to crusher. Tailings will be screened down. Needed skills and expertise: - Expertise in designing and implementing gold processing plants. - Knowledge of gravity separation methods You should have a successful track record of designing similar plants, especially for high-grade ores. A solid understanding of safety and environmental considerations pertinent to gold processi...

I need an experienced conveyor belt design engineer to create a preliminary design for a belt conveyor. Key Requirements: - This conveyor should be able to transport agricultural products, gravel, and other products at a port facility. - An understanding of the port industry and conveyor systems would be a great plus. - A strong emphasis on reliability and ease of maintenance. In your application, please emphasize your experience in the field. Prior work on similar designs will be highly regarded.

I'm in need of a skilled AutoCAD designer to help create a set of basic outlines and dimensions for a conveyor gallery and its accompanying trestles. Key requirements: - Understanding of mechanical and structural design principles - Proficiency in AutoCAD to create detailed but basic outlines and dimensions Ideal Skills: - Mechanical Engineering - AutoCAD - Structural Engineering - Industrial Design The purpose of these designs is primarily for the transportation of materials. The project is relatively straightforward and does not require detailed component drawings or consideration of environmental factors. The primary focus is on getting the basic dimensions and outline of the conveyor gallery and trestles. Please provide examples of relevant past wo...

...based in New Hampshire. There are several details that will need to be seen in person. I'm in need of a structural engineer to help me with a renovation project that involves modifying garage trusses to accommodate a lift. A similar project is discussed at this site and pictures of the changes made are attached. Key Responsibilities: - Conduct thorough structural analysis of the existing garage trusses. - Provide detailed calculations for the modifications needed to safely install a lift. - Ensure design adheres to necessary building codes and permits. Ideal Skills and Experience: - Proven experience in structural engineering, specifically in renovation and modification projects. - Proficiency

Description I am looking to work with someone who can design the electrical system for a web take-up and vacuum conveyor system. Currently, each product line and the waste web comes off the printer and falls into a tray for the operator to sort into bags. The end goal of this project is to automate the whole process. What does this look like. Automating the process involves an operator loading the material roll onto the machine, feeding the roll onto the bed and the take-up, and letting the machine do the rest. The web will travel along the cutting belt, onto the vacuum conveyor, the waste material is then extracted onto a take-up and the finished stickers travel down the vacuum conveyor to a bagging station. The initial take-up design consists of t...

I need a layout drawing for our factory to guide the machinery installers. - You'll need to include conveyor systems, manufacturing equipment, and packaging machines. - The layout must take into account available floor space, ceiling height limitations, and doorway dimensions. I'm looking for someone with experience in industrial design and layout planning. The ideal candidate will have a good understanding of machinery and factory specifications to ensure the layout is both functional and safe. A background in engineering or factory design would be a great advantage. You should be proficient in CAD software and able to provide a clear, detailed drawing.

*Responsibilities:* - Design and analyze structures for residential, commercial, and bridge projects. - Collaborate with architects and engineers to ensure designs meet standards and client requirements. - Prepare technical drawings, specifications, and reports using AutoCAD for steel structures, trusses, and Pre-Engineered Buildings (PEB). - Provide support to construction teams during implementation, ensuring structural integrity and safety. - Stay updated on industry trends, codes, and regulations related to residential, commercial, and bridge design, as well as steel structures, trusses, and PEB. *Qualifications:* - Bachelor's/Master's degree in Civil Engineering or related field. - 1-2 years of experience in structural design, with a focus ...

...Freelancer.com Admin[ *Responsibilities:* - Design and analyze structures for residential, commercial, and bridge projects. - Collaborate with architects and engineers to ensure designs meet standards and client requirements. - Prepare technical drawings, specifications, and reports using AutoCAD for steel structures, trusses, and Pre-Engineered Buildings (PEB). - Provide support to construction teams during implementation, ensuring structural integrity and safety. - Stay updated on industry trends, codes, and regulations related to residential, commercial, and bridge design, as well as steel structures, trusses, and PEB. *Qualifications:* - Bachelor's/Master's degree in Civil Engineering or related field. - 1-2 years of experience in structural ...

I'm in need of a dedicated and experienced...can provide a full suite of services for my residential building project. The ideal candidate should be able to efficiently handle structural analysis, foundation design, and load calculations. Project will be located in Florida, so Engineer must be licensed in FL and able to sign and seal plans. Key requirements: - Proficiency in structural analysis, foundation design, and load calculations - Experience in providing full structural design for residential buildings - Experience with Simpson portal or shear wall products - Strong communication skills - Ability to coordinate with engineered trusses and design conventional trusses as required. This project is on a tight timeline, so the successful...

I need a capable engineer proficient in truss design and load-bearing calculations for my commercial construction projects. Key Details: - Focus is on developing bespoke trusses for curved climbing walls. - Each truss design is unique due to wall curvature variance. - A comprehensive understanding of commercial construction requirements is vital. Ideal Skills: - Extensive expertise in Pratt, Warren and Howe truss designs. - Experience in structural engineering, specifically for commercial construction. - Strong ability to execute load-bearing calculations with precision. I appreciate your attention to detail and look forward to your innovative solutions to meet this challenge. Attached you can find details from other project. We need quality atleast as good as th...

I require an AutoCAD designer who can create a 2D design of a conveyor system to be utilized for material handling, product transportation, and for assembly line processes. - Key Skills: AutoCAD, Mechanical Engineering, Manufacturing Design, 2D Design - Tasks: Your main task is to design conveyors for my project which is integral to overall system flow. - Experience: Proven experience in designing conveyor systems crucial. Prior work with manufacturing or assembly line processes is ideal. If you have hands-on experience and are ready to take up this challenging project, I welcome you to bid.

I am in need of a developer with expertise in machine learning and object recognition to design and build a conveyor system. This system should be capable of recognizing words on objects, using a camera integrated with technology similar or equivalent to Google Lens. Key aspects of the project include: - Object Recognition: Your role will involve setting up the system to recognize and process text on a variety of objects. - Data Collection: The system must be capable of collecting and organizing data from the scanned objects for further use. - Medium Volume Processing: Expect to design the system to handle a medium volume of objects, approximating up to 1000 objects daily. Ideal candidates for this project have previous experience in object recognition systems, m...

...covered gazebo, I am looking for a detailed and compliant structural design that will aid during the permit process for Rochester MN 55902 building codes. The gazebo's primary purpose will be to house an outdoor pool table and it will be constructed purely from wood. I prefer a design aesthetic that leans more towards a rustic style. This project doesn't require the actual construction of the gazebo, just a robust and professional blueprint that adheres to building codes. With scissor trusses having an outdoor slope of 9/12 and an inner slope of 4/12 with 2’ on center spacing and having the bottom of the truss at 8’ Ideal Skills and Experience: - Structural engineering - Architecture - Woodwork design - Experience with gazebo desig...

I'm seeking an experienced photoshop professional who can skillfully edit five of my drone photos. Your task will be to focus on: * Removing all buildings, pools, conveyor belt and adjoining buildings, but leave blue building cluster and white tower that is generally in the middle of the shot. Rusty tower can go too. Docks can stay. I have 6 photos altogether that need this photoshopping done. All the same property but from different angles. * Rendering the images natural-looking. I'm not looking for excessive effects - the edited photos should harmoniously blend into their environment, seeming untouched to the untrained eye. I encourage those with proven photoshop experience to apply, especially if you have examples of similar work. I need these images to look as real...

I am seeking an experienced technician to upgrade my conveyor system's functionality. The project has twofold goals: 1) Fix/replace the faulty VFD that controls the conveyor belt (Capacitor has popped) 2) Integrate a VFD that controls a motor that drives the attached guillotine mounted on top of the conveyor belt. Job Tasks: - Swap out a faulty capacitor on the existing Schneider VFD. - Integrate a VAC 220 VFD to the switchboard, to drive a 1/2HP 3 ɸ motor for the guillotine module. - Hands-on experience with VFDs. - Expertise in electrical capacitor replacement. -Expertise with industrial automation.

I'm looking to develop a vector controlled Variable Fr...of this project is creating a VFD that smoothly operates machine controls in an industrial environment. The ideal candidate will have understanding and experience in: - Designing and constructing VFDs - Familiarity with the variances between pump, fan, and conveyor controls, specifically machine controls - Experience in industrial machine operation The specific required control modes for the VFD are: - V/F Control - Sensorless Vector Control - Closed-Loop Vector Control Additionally, Modbus communication capability in the VFD design is essential. I expect the freelancer to deliver a reliable, effective solution that can seamlessly integrate into an industrial environment, considering all the necessary steps an...

...different types of edges and fixed locations. Since our systems look different for each customer (e.g. different locations, different number of edges/nodes), we want to be able to create the Anylogic model programmatically, i.e. without the need for drag and drop. So you would be given an arbitrary list of node locations and edge types and the task is to create a network consisting mainly of conveyor objects from this list. We do not need to be able to manipulate the model in the Eclipse GUI, we are interested in the bare simulation. For your understanding, once this works, we will communicate with the simulation to test our transport logic. - Timeline: Please note, it's important that the project is completed within a month. Therefore, the ideal candidate should be able ...

I need a proficient Arduino programmer with extensive experience in code development and circuit design. As a key part of this project, you’ll be working on a robotics venture tailored for industrial machines. Below are the specific aspects we look at: - Previous experience in programming Arduino for industrial robotics. We value examples of prior relevant projects. - Proficiency in developing custom codes and creating circuit designs to fit unique project requirements. - Strong understanding of hardware integration, though this is not a primary task for this job. - An innovative problem-solver, capable of suggesting improvements or alternatives when needed. Your task will mainly involve developing unique codes and crafting circuit designs in the context of industrial mac...

Create a simulation based on the given diagram and layout using Visual Components. This layout is for a paint shop with overhead conveyor system. (You can find the overhead conveyor component in Visual Components eCatalog) The dimensions of machines can be measured approximately from the drawing. (The machines can be modelled in simple shapes like blocks) The square area at left bottom corner in the drawing can be ignored. Submit the file in Visual Components format '.vcmx'. (Take this video as a reference: )

...experienced engineer capable of conducting a detailed API 650 standard internal floating roof and cone roof analysis on an oil storage tank using Autodesk robot structural analysis or any other structural analysis software. The intended project should provide: • Thorough structural analysis of the steel storage tank roof system consisting of roof trusses and columns. • Results that are consistent with API 650 standards. • Analysis and design using Autodesk robot is preferred but other structural analysis software are acceptable Ideally, you should have: • Proficient understanding of Autodesk robot for structural analysis. • Deep knowledge of API 650 standards. • Past exposure to static analysis in steel structures, especially storage tank...

In this project, I am seeking assistance with Mechanical and Structural Engineering. You will need to be an Ontario Canada licensed PEng because stamped drawing are required for payment. Drawings without a stamp are of no value. We are planning to develop and construct a conservatory greenhouse. We need help designing and specifying the trusses and the structure. In the end we will be looking for stamped drawings. We have this mostly developed in fusion and we have also been using blender to enable us to move this into VR and walk around - if this interests you. We can do most of the work and the detailing - but we need a professional review and sign off.

I need to raise capital for a medium-sized (1,000 - 2,000 sq ft) home construction project. This unique project leverages prefabricated components, including walls, modular flooring, and roof trusses, which will be assembled in a rural setting. Ideal partners should bring: - Extensive knowledge of and success in capital fundraising - Previous experience with construction projects, particularly using fabricated components - Familiarity with rural construction environments and regulations Your role will involve developing a comprehensive capital raising strategy and executing it, with my support. The goal is to fund the project's full execution, and build a cost-effective, yet high quality home.

I am in need of an expert in Tekla Structures for steel detailing. While I don't have a specific design standard or code to adhere to, your ability to apply best practices in the industry is required. The main purpose of using Tekla Structures for this project is steel detailing of beams, columns, and trusses. Key Responsibilities: - Structural analysis using Tekla Structures. - Steel detailing: You will have to detail beams, columns, and trusses. Ideal Skills: - Proficiency in Tekla Structures - Understanding of steel detailing principles - Ability to work without specific design standards or codes - Experience with beams, columns, and trusses steel detailing.

Vänligen Vänligen Registrera dig eller Logga in för att se mer information.

I am in search of a talented individual who can breathe life into my vision through simple one-frame cartoons. Key Responsibilities: - You'll be creating characters that fit specific roles including a manager, engineer, conveyor belt, and process worker. - Your primary task is to demonstrate a leadership mindset through these characters in a way that resonates with wisdom and insight. Artwork and Emotion: - The style of artwork I require is cartoon-based. - Despite the humorous characteristic usually attributed to cartoons, the intent here is a more profound. Each cartoon should communicate a clear and concise concept about leadership's direction and guidance aspects. Ideal Candidate: - The ideal candidate should be adept at creating cartoon characters. - Experience ...

Project Description: Conveyor Dashboard App Overview: The Conveyor Dashboard App is a comprehensive solution designed to monitor and analyze the movement of objects on a conveyor system in real-time. This app aims to provide users with a clear and intuitive interface to track the current activity on the conveyor, review historical data, and forecast future movements. Additionally, the app will offer a feature to share daily reports and customize settings according to user preferences. Features: Dashboard: Real-time display of objects moving on the metrics such as total objects moved, average speed, and and notifications for any anomalies or system issues. Past Records:A chart-based visualization of historical to view records by date, time, or specific

This project needs a freelancer experienced in toy manufacturing to design a hand-cranked conveyor system made from metal. The purpose of the toy is simple yet fun: transporting sand from a low point to a high point. The device should also allow for the sand to be deposited into a toy dump truck. This project is a great opportunity to showcase your understanding of mechanical principles. Ideal Skills and Experience: - Experience in toy design or manufacturing - Sound knowledge of mechanical principles - Great understanding of working with metal for toy creation System Specifications: - Primarily made from metal - Should include a conveyor belt, a hand-crank system, tensioning mechanism and frame support - Must be safe and sturdy to handle a weight of less ...

...for 3 ply 4x6 posts. 1st floor will be a full subfloor sytem using tgi floor joists. There will be a 2nd story 6'x30' free span cat walk leading to a 18'x32' loft area. Will be exposed faster metal roof & board and batton metal siding. 1/2" osb on just walls. Trusses will be 8' o.c. - Required Expertise: The ideal freelancer for this project would be an architect or a blueprint designer with an established portfolio exhibiting residential properties, particularly log cabins and post-frame additions. Familiarity with modern rustic design would be a plus. - Project Deliverables: The final deliverables would be the blueprints, including floor plans, plumbing and electrical map, and 3D model, if possible. This should be appropriately sized...

I am seeking a developer skilled in Python to create a system that is able to count medium-sized objects such as boxes or packages as they pass on a conveyor belt in real time. This system does not need to differentiate between object types, it should merely count the total number of objects as they pass. The main requirements are: - Fluent proficiency in Python and OpenCV - Experience in object detection and counting - Prior experience in real-time data processing Ideal candidates should have previous experience in similar projects and be able to show examples of their work. Being highly skilled in Python is a must for this project. Attention to detail will be appreciated as accuracy in counting is crucial. Already worked on similar projects will be advantage

I am in need of a highly skilled electronic engin...Skills/Experience: - Expert in Raspberry Pi and Arduino. - Proven experience in Robotics, particularly robotic arm design. - Understanding of object manipulation, precision tasks such as soldering/welding, and sensor interaction within the environment. The ideal freelancer for this project will have: - Experience in robotics, specifically designing robotic arms. - Prior projects involving object manipulation and sorting tasks alongside precision operations. - An exceptional understanding of developing an environment interactable robotic component. This project is intricate and advanced. It will perfectly suit an engineer passionate about cutting-edge technology with a creative mindset. Let's design the robotic arm of...

I am in need of a detailed Solidworks model and drawings for the product design of structural steel trusses. Familiarity with 2010 Solidworks edition is necessary. - Product Focus: The main focus for this project is on the design of steel trusses. Knowledge and understanding of actual trusses design and its different components will be essential. - Ideal Experience: Freelancers with prior experience in designing trusses for structural steel units will be preferred. - Skill Requirement: Proficiency in using Solidworks 2010 for product design is necessary. Familiarity with mechanical engineering concepts are also required to effectively contribute to this project. All engineering data and examples are provided, We only need someone th...

Looking for an experienced HSBcad designer to create shop drawings for wall panels , floor/roof cassettes and stairs from the building plans. Being able to include the different ...to create shop drawings for wall panels , floor/roof cassettes and stairs from the building plans. Being able to include the different (MEP) mechanical , plumbing, electrical runs is a plus! These drawings will be used for offsite manufactured buildings This project requires: - Understanding of HSBcad software - Experience with wood materials, specifically Dougfir timber, I-Joists, plywood ,trusses - blueprint reading - 3d modeling -clash detection Project specs -1050 sq foot residential house -5 different models Please include samples of previous jobs shop drawings for walls , floors, roofs ...

...with explanations bellow. Ideal skills: - Proven experience in icon design, specifically line icons - Web design experience would be a plus to understand the context where the icons will be used. - Skills in Adobe Illustrator as we need it in vector format and The titles in (brackets) are for explanation only and no icon is required for them. (Quality Assurance) Regression Testing Acceptance Testing Interface Testing Integration Testing System Testing Exploratory Testing Non-Functional Testing Functional Testing (IT & Business Consulting) Wireframes and Mockups​ Clickable Prototypes​ Rapid Software Prototyping​ Pilot Project Development​ (Web Development) Custom Web Development Enterprise Web Solutions Web Design and User Experience Web Maintenance and Su...

...licensed Structural Engineer passed away while in the middle of a project. He designed a 12 foot tall CMU block basement wall that we have constructed several times. We didn't find out he had passed until months after this project started. I am in need of a stamped engineered drawing that I can use for my inspection. Attached are the drawings I have used for both top chord and bottom chord floor trusses. The project needs to be completed as soon as possible due to tight schedules. I can send project photos if this link does not work: **Key Requirements:** -**Credential:** Licensed Engineer in the State of Tennessee - **Material:** The foundation wall should be constructed using Concrete Masonry Units (CMU)

I'm on the lookout for a reliable purchasing agent who can provide a purchasing management services for both standard and customized metal engineered building products. Our ongoing demand includes roofing sheets, wall panels, structural steel, roof and floor trusses, engineered wall assemblies (sheet and rockwool sandwich construction with internals), plus outdoor structures such as fabric and truss temporary buidlings (small to med size) and pergola systems. **What I Need:** - **Versatility**: Ability to supply both standard and customized items. - **Range of Products**: From basic structural elements to specialized outdoor and architectural features. - **Quality and Compliance**: High-quality materials that meet international standards. - **Supplier Sourcing**: Ongoing suppl...

I require schematic design drawings for a prototype device. This includes a detailed focus on electro-mechanical elements, specifically: - Mechanical systems; The ideal freelancer for this project would be highly skilled with experience in electro-mechanical drawings. They should have a good grasp of working on prototype devices and must be able to showcase previous work related to this. An added advantage would be a strong understanding of different types of mechanical systems, including (but not limited to) HVAC, Plumbing, and Conveyor systems. Please, I need you to detail your experience in your bid, and provide examples of your past work if possible. Let's create something brilliant together.

...stages involve constructing a 16x24 pavilion, followed by a 2-3 car garage in 2025, (...) and finally, a 2-story house with a walk-out basement in approximately 5 years. I am seeking a Wyoming-licensed PE to act as a trusted advisor and partner throughout this project. Goals: - consult project ideas, feasibility assessments, and design concepts. - review and updating drawings to ensure compliance with Laramie County regulations, e.g. foundations, trusses, and rafters. - prepare permit packages for both the city and HOA, addressing any Wyoming requirements. (rubber stamp, etc). I am open to both fixed-price and T&M contracts. Please note - I will only consider responses that include details allowing me to verify your (or your company) Wyoming licensure. A PE mus...

...of a skilled architect or structural engineer to design a medium-span, gable-style steel roof truss for a residential project. The design should prioritize both aesthetics and functionality, fitting seamlessly into the overall architectural plan of the home. **Key Requirements:** - Experience in designing steel roof trusses, particularly for residential buildings. - Ability to create a gable roof truss design that meets medium span requirements. - Proficiency in structural analysis software to ensure the design meets all necessary safety and building code requirements. **Ideal Skills and Experience:** - Strong portfolio of previous roof truss designs, especially within the residential sector. - Expert understanding of architectural design pri...

As the owner of an 85 foot long steel truss, I'm in need of a professional structural engineer with expertise in steel trusses to provide third-party validation. The primary aspect that needs verification is the quality and integrity of the load-bearing members. Ideal candidates for this project would have: - Proven experience in structural inspections - Thorough understanding of steel as a construction material - Ability to evaluate the integrity of load-bearing structures Your role will involve analyzing the steel used in these structures, verifying its prospects and reassuring its safety and effectiveness. Your findings will significantly impact the future use of this truss, hence a meticulous and diligent approach is required.

...Autodesk Fusion360 to transform and enhance a current conveyor belt design furnished in .iam and .ipt formats. The primary goal is to modify and edit the existing design, not just for visualization purposes but also to generate manufacturing drawings. KEY MODIFICATIONS: - Alter Component Structure: The structure of the existing components requires a revamp. - Resize Conveyor Belt: The conveyor belt's dimensions need to be adjusted. - Adjust Mechanical Functionality: The belt's speed must be altered. IDEAL SKILLS & EXPERIENCE: This project needs an individual proficient in using Fusion360. An understanding of mechanical engineering principles, especially related to conveyor systems, is also paramount. Previous experience with ...

...manufacturing sector. - Strong negotiation skills. - In-depth knowledge of the engineered wood products market. - Fluent in Spanish and English to effectively communicate with local suppliers. Specific products would included: - wood roof trusses - wood floor trusses - semi finished wall sections (framing, sheeting, insulated with conduit tubing installed and outer membrane applied) Each order will have specific drawings showing each section subassembly system. Freelancer will be required to locate a suitable supplier(s) who would be currently building trusses and prefab wall sections. This project is perfect for someone who thrives in fast-paced environments and has a proven track record of successful sourcing and procurement in the manufacturing industry. If y...

...the reliability and efficiency of our conveyor belt system used primarily for transporting goods. Our focus is strengthening the maintenance aspects, particularly in fault diagnosis and implementing a semi-automated diagnostics system. Key Requirements: - Expertise in Siemens PLC systems including programming, troubleshooting, and maintenance. - Proficiency in designing and implementing semi-automated diagnostic tools for conveyor belt systems. - Strong background in mechanical engineering, specifically related to conveyor systems. - Experience with preventive maintenance scheduling and execution. - Ability to optimize software for better performance and reliability of the conveyor belt. Ideal Skills and Experience: - Previous experience with conveyor...

I'm looking to hire an experienced website designer with a knack for functional and engaging ...functional and engaging designs. The goal is to develop a professional-looking website showcasing my industrial conveyor system, primarily used in loading and unloading items from trucks. Key Tasks: - Design an engaging, detail-oriented, and professional-looking e-commerce website. - Highlight the key features and functionalities of the conveyor system. - Integrate e-commerce features, as products should be purchasable directly from the website. Ideal Candidate: - Proven experience in designing e-commerce websites. - Demonstrable knowledge or experience in industrial machinery or related field would be considered an asset. - Strong portfolio of prior design w...

...engineer or similar professional to develop an optimized layout for our expansive 100x100 ft industrial space. The layout will involve packaging equipment/automation equipment including bins, scales, and conveyor belts, so in-depth knowledge in these areas is highly recommended. - Layout Design: The layout should factor in equipment placement, material flow, system efficiency, and ease of maintenance. As such, the ideal candidate should have: • Experience in drafting layout plans for manufacturing facilities with provided equipment drawings. • Comprehensive understanding of conveyor belts and packaging line machines, and some understanding of dry solids material handling. • An eye for details and high-level spatial awareness - Objective: ...

My project requires a realistic 3D walkthrough of a modern corporate building. Your detailed showcase should include: - The lobby - Conference rooms - Working areas - A warehouse - Storage areas I have a preference for a modern and minimalistic color scheme and theme for the building's interior design. Your ability to interpret and showcase this through your work will be essential. InGen Deep Space Nine Station In this eco-friendly and technologically advanced building inspired by Star Trek, we aim to create an innovative, sustainable, and futuristic environment that aligns with Iour mission and culture. Here's a detailed material plan and branding for each section: Store Room - "Stardate Storage Zone" Material: Recycled steel shelving and eco-friendly ...