ArduinoJobb

MATLAB SOFTWARE from solar panel(DC) - controller - inverter(AC) single phase cascaded multilevel inverter (5 level) - DSP/arduino controller - (RL load) to grid tie - monitor(power digital meter) *using lab view

I want programmer to design the arduino code to perform the action of to reed the image file (BMP or some other format) from the SD card and display the same in led board. led board is in the order of 100 x 100 nos connected with shift register ic

I'm trying to build the control system of a commercial ice machine

I have a small task involving Arduino and PHP. I would like to pay $20 for this. Place your bids.

I need help to tweak the input box code in which, I need to take the whatever value I gave it in the sleep timer box, the code should take that as an input and make the pycom wipy go to deep sleep for that number of seconds as it is entered in the input box. Should be working on both arduino ide and atom

DC ( in build hall effect sensor) motor position control using PID and also store the retentive position.

No necesitas un Arduino (C/C++). Você não precisa de um arduino. No necesitas un ESP32 (MicroPython). Você não precisa de um ESP32 (MicroPython). No se necesita experiencia. Você não precisa de nenhuma experiência. You must live in one of the following countries.... Brasil, Colombia, México, Argentina Chile, Uruguay, or another country in Latin America ✻ OVERVIEW ✻ You do *not* need any experience. You do *not* need an Arduino. You do *not* need an ESP32. I estimate that you will normally work 1 hour/day. I will pay you hourly via Freelancer. I presume Freelancer will deduct their 10% fee. You will normally work 20 days/month. If you are very intelligent and if you solve engineering problems scientifically ...

as clint node mcu and the server is the website led and dht11 control

Previous engineer did a great job but sadly let us down on fixing bugs at the end. The project is a RS232 controlled timer module with LED matrix. Firmware is written in Arduino. PC control software is written in Python. PC software polls and sends commands to multiple boards connected to RS232 ports. Both pieces of code run very nicely together and we are using it daily in our business but we now want to iron out the last few bugs from the code. For example, one of the bugs is a Python crash during the connected PCB search routine if more than one type of RS232 adapter is plugged in. The others are more or less as trivial. Once the first bug is fixed satisfactorily I'm going to post each successive bug as a standalone extra milestone with a new payment attached to it.

I have a arduino sketch. Led blink on millis.(no delay) Led on for 5 seconds and off for 50 seconds. I attached to arduino button. Now I want when I'm anytime short press button , led on for same 5 seconds. But when I'm long press button , arduino need store how many seconds is was pressed and change led on time to that value

I would like to make a communication system using Arduino or Raspberry pi that allows to people to communicate with each other. The one is on the "base" where the communication center is and the other one can be to maximum 100meters away and holding only a microphone and a speaker. Not a wireless communication. There is communication line (wire) throughout the whole distance.

I'd like an arduino to turn on and off a set of up to 8 relays independently and in succession. The user can set the amount of time in minutes and seconds that each relay needs to turn on and off for. The arduino has an LCD screen that displays up to 9 pages. the user can scroll through each page. The first page has a summary of what relay is active, the relay's time on, and its time off. There is also the ability to turn on or off ALL the relays The remaining pages (one page per relay) allow the user to see and set the amount of time the relay needs to turn on, and off. Each relay page will have: Relay Name (Alpha numeric field); On time (Minutes: Seconds); Off time (Minutes: Seconds); Current status (On or Off) If all the ON and OFF times are the same, each relay...

Create an App for mobile phone with SO Android: - App for SO Android using Native - Communication between phone and IoT device will be using BlueTooth - Mobile phone will receive data from IoT device - IoT device will send 3 parameters (data1, data2, voltage) App User will allow IoT device to connect to App. Avoid to modify IoT parameters/code requirements ...base. Sometime is not possible to connect with the server, in this case, provide a way to send the data later. In this case, in the local data base should be indicated if data was sent . User must be able to download the data in a text file. The communication between phone and server will be through POST with JSON. At the end you will provide the code for App and example code for IoT device (Arduino ). The code must be f...

Do not apply this offer if you don't live in Spain/Barcelona or near. Buscamos alguien con conocimientos de lenguaje de máquinas para interconectar una raspberry o un arduino a maquinas recreativas. El objetivo es evolucionar estas máquinas mediante nuevas tecnologías. Se integrará con otras interfaces pero no son requisito de esta propuesta. Los requisitos son: Interconexion de hardware Conocimientos de electrónica basicos Programaciónd en Python para conectar con una API. Al trabajar sobre una máquina recreativa, se requerirá vivir en Barcelona o cerca.

By using an arduino nano 2 trigger sensors call them trigger 1 and trigger 2 needs to be able to count. Trigger 1 then 2 counts on up and trigger 2 then 1 counts on down. When it reaches a curtain limit it needs to switch on the light and when there is more than the limit it should flash the light. As soon as the limit is less the light goes off. I need to be able to set the limit in the programming. I need someone to be able to program this small project for me. I have all the hardware and just need someone to program.

I need a program to collect data from transmitter with 4-20mA output and log it to an SD card with a frequency of 8 hz. a bluetooth module or RF be connected to display instantaneous values on a smartphone. the whole setup should run on a battery backup for about 48 hours.

Develop an automatic tracking system which will keep a camera aligned with the sun at a 0 degree angle such that the sun always stays in the middle of the camera frame. The system will rotate the camera up and own/left and right according to the sun’s position using stepper motors controlled by an Arduino/raspberry pi to align with the solar position. A rough diagram is attached Note: The end product we require is the software(code) that you'll use to implement the project so that we can replicate it ourselves.

I want to design the PCB for a Shield for Arduino Nano using KiCAD

Projetar a leitura de um cartão RFID e jogar na saída serial RS232, não TTL, é similar a um controle de acesso, mas não é, será usado para acessar um equipamento de tecnologia. 62-98610-1115 contato. Poderia ser até com o KIT ARDUINO. Precisamos analisar.

We have working code for TTGO 7000G as the Base Unit and TTGO LoRa 32 as the Node. But the TTGO LoRa32 has terrible deep sleep. It is using some 12 mA in deep sleep. So we like to change to the Heltec Cubecell Board for the node. TTGO 7000G: (BASE) Heltec Cubecell (DESIRED NODE) TTGO LoRa32: (Working NODE)- POOR SLEEP POWER CONSUMPTION 12 mA

I have A TTN LoRa gateway & I need some code & design/config assistance. • Write Arduino sketches for TTN Uno LoRa devices to communicate to/from NodeRed via TTN through my gateway • Configure Node Red to act upon event & enable digital output at remote node

Arduino code to control a toy helicopter on a support rod to hover at a certain height.

You do *not* need any experience. You do *not* need an Arduino. You do *not* need an ESP32. You must live in one of the following countries.... Bosnia and Herzegovina, Serbia, Bulgaria, Montenegro, Albania, Kosovo, North Macedonia,, Moldova, Romania, Ukraine, or Belarus. ✻ OVERVIEW ✻ I estimate that you will normally work 1 hour/day. I will pay you hourly via Freelancer. I presume Freelancer will deduct their 10% fee. You will normally work 20 days/month. If you are very intelligent and if you solve engineering problems scientifically then I will pay you to learn C/C++ on Arduino or MicroPython on ESP32. No. I am *not* being charitable. I am being practical. You must pass a difficult test to work with me. You will help me build a consumer IoT (Internet of thing...

i need a simple sketch which will use Arduino nano with nano logger shield to collect sensor values from a 4-20 mA industrial pressure transducer and write to a time stamped txt file at a frequency of about 8 to 10 Hz. ( 8 values per second. Additionally a blue tooth module canto be added which can upload instantenaous values to a smartphone for display. the sensor needs 8 to 24 volts for operation. the entire setup should run using a compact battery power source and run unattended for 24 -48 hours.

i have an 2 Arduinos and i make a connection via serial communication what I want is to make encryption and decryption using AES

Please have a look at this video from the 0:15 time. You will see this yellow cylinder holding a train and spinning 360 degrees to discharge the train. So, I need to improve so it is always aligned or add an alignment system so it is always perfectly aligned waiting for the train (see time 1:33 of the issue). I am going to give you the original code, perfectly working, but i need to add the rotary encoder or another system you recommend me to add to get it to work. To sum up, the project is: modify my existing device so I can get a position feedback and self align the wheel. Please bare in mind this is a hobbyist project and it is not intended for commercial application; so my budget is quite low.

I have a lego train that approach to a lift. 1. There is IR sensor, detecting when a train is on the platform 2. the motor will get activated and the lift will go up, until a limit switch is hit, stopping the lift. 3. the train get off the platform, the lift remains up 4. the train is back onto the platform, the lift goes down, the motor gets stopped by a bottom limit switch 5. the train gets off the platform, the lift remains down, waiting for another train to come back up 6. the cycle repeats itself again.

I need a Linear actuator rail for use with an Arduino Uno and a BVM (Ambu bag) for a ventilator Project.

- control 1 propeller motor set timer rotation per minute -control 1 fan motor -control 2 motor pump -control a motor ... action relay arduino .. code gerber pcb layout nextion interface etc I will collaborate with online test

I work in the ag irrigation industry. I am needing help programming arduino boards that monitor several sensors including PH, pressure, and temperature. I will also want the board to connect to the internet so i can view the data from my phone or computer. I contemplated using an arduino yun running the blynk software but i am open to other platforms. Thanks,

I need a Arduino CS:GO mouse hardware for Leagues like Face It and Esea. I am willing to pay monthly if I like your job. I need a mouse hardware that have aimbot and recoil

hi guys i need an arduino programmer, RGB color detector is my project name. tcs3200, 16*2 display and esp8266 & servo motor to interface with arduino.

I need arduino uno code to control a wind turbine. There is a wind speed and wind direction sensor, and these inputs will change the Yaw angle so that we get optimum power. We are using a stepper motor to adjust the wind turbine.

I have what I THINK will be a simple project... I want to create a WiFi-enabled controller for a process I’m currently doing semi-manually. It involves several things, but the more complicated stuff/code has (I think?) already been done... I currently have an Arduino that is operating a turn table (via a DC motor), triggered by a load sensor (ie, a kitchen scale), and guided by hall sensors (ie, tells it where to start and stop when initiated). All of that code has been written and the process is functional and operational. It just needs to be translated to both a physical display screen, and into a WiFi module. I’m thinking about using the Blynk app as the base? It seems to have all the capabilities I need but every time I try to start making it I get lost!!! ...

No necesitas un Arduino (C/C++). Você não precisa de um arduino. No necesitas un ESP32 (MicroPython). Você não precisa de um ESP32 (MicroPython). No se necesita experiencia. Você não precisa de nenhuma experiência. You must live in one of the following countries... Brasil, Colombia, México, Argentina Chile, Uruguay, or another country in Latin America ✻ OVERVIEW ✻ You do *not* need any experience. You do *not* need an Arduino. You do *not* need an ESP32. I estimate that you will normally work 1 hour/day. I will pay you hourly via Freelancer. I presume Freelancer will deduct their 10% fee. You will normally work 20 days/month. If you are very intelligent and if you solve engineering problems scientifically t...

(Please do place final offer only. Renegotiation will not be accepted.) Description HW The goal is to develop a round shaped testboard with 23 pcs of RGB LED (SMD-LX0707RGB-TR) on the front-side and the control processor (Arduino Nano Every Board) placed on the backside. 20 of the LEDs (L1...L20) on the frontside are arranged in a circle as with 18° orientation from one to the other. The other 3 LEDs (S1...S3) are aranged outside of the circle. --> Placement of all LEDs according to the drawing on the attached pdf. 2 soldering pads for 5 V powering shall be placed on the backside as well. Description Software After powering the board the LEDs L1...L20 are to be switched on and off one after the other for 50miliseconds. This creates a moving light that runs in a circle. Fir...

Hello, I would like to have a board with 7 Segments (or maybe you know something else’s). It should be possible to add a present date (by eight 7 segments) and there should be two 7 segments for year, two 7 segments for month am two 7 segments for days. These should show the past time still the present date. I want to produce a prototype by pcbway.com. The segments should be white, there should be a on/off button. The power should be batterie. It should be possible to dim the brightness. And it should be possible to add the present date by buttons on the backside. So I need the Gerber file, BOM file, and Pick and Place file and the code. I think we need an RTC to make sure the time will count when the device is off. Greetings from Germany Johannes Schild

We are on a mission. We are working on technology that could significantly reduce and potentially bring an end ...current firmware. You will need to work actively using our Github repositories. Code will be compiled on our end using and code should be done using Visual Code Studio. You will need to send specific instructions for the code to be compiled when using PM us, if interested, please include send us your Github handle. We are looking for developers with experience with Arduino, RTOS, MQTT. sim7000x radio unit, TIG (Telegraf, InfluxDB, Grafana) stack and BLE. Developers shortlisted will be given access to the current repositories and will be asked to evaluate and assess the work to be done. Only bids made after this process will be considered.

...students. In first step signal are required with the help of power lab AD instrument, then the next step is to implement feature extraction using AR model technique in MATLAB. After that, for classifying the signal, SVM method is used. Now these signals are usable and are sent to the electric wheelchair (also self-designed). Software and hardware interfacing is done and the signals are sent to Arduino controller to control wheel chair because of these signals. 3. Computer Numeric Control Machine The aim of this electrical project abstract is to design a Computer Numeric Control (CNC) Machine that is capable of doing light job. These works include material such as wood aluminum. The CNC machine consists of a controller, stepper motors, mechanical shafts and breakout board with co...

Looking for arduinio expert to help with work project. I need an expert coder to halp me

need a expert electrical engineer who is expert in: PCB, Arduino proteus Altium Raspberry

Please refer to attachment. I describe what I need done. Please let me know if it is possible and please help me to figure out what I need and how I can do it. Thanks

please bid and i'll get back to u thanks

...birincisinde 28 byj-48 step motor bir yöne istediğim kadar tur, ikincisinde ters tarafa, üçüncüsünde ise bir tarafa dönüp iki saniye bekliip diğer tarafa döndürmek istiyorum. nodemcu'yada wifi ile telefondan kullanıcı adı şifre yazıp bağlanarak browserda bir ara yüz açılsın istiyorum ve blynkin auth kodu, nodemcunun bağlanacağı wifi'ın adı ve şifresini yazmak istiyorum. Elimde şuan kullandığım arduino ile yazılmış browser ara yüzü olan başka bir yazılım mevcut. buna Blynk uygulamasının auth kodunu yazabileceğim bir alan eklemek istiyorum. süreci hızlandıracaksa kodları gönderebilrim. browser görüntüleri ekliyorum. bu linktede konuyla ilgili benzer bir video mevcut. e...

Hello, For a personal project I need someone to develop some Arduino demo code with the ESP32. The peripherals to drive are: SPI ST7789 display, I2C/SPI RC522 RFID, SPI SD card, UART GPS, Buttons, Relays, ADC moisture sensor, Audio/I2S MAX98357. All the Arduino libs that drives these peripherals are already available on the internet. The scenario is just a demo code that shows that the ESP32 is correctly connected and can communicate with the peripherals. The ESP32 is connected to the PCA9698 IO expander. Tasks: A)Do schematics with breadboard B)Develop Arduino demo code C)transpose the schematics into Altium or Kicad schematics ready to be routed The complete specification of the work will be transmited later to motivated candidates. Regards, Michel

Update a alert system for a child's car seat that was working until 12/30/20

What is the deliverable? A firmware file that will work on an Arduino board and accompanying windows file if needed. Help with physically creating the prototype on our end, through the way of schematics and/or video call. What needs to be done? We need to turn on a LED if a certain service is running on a windows computer through an RF module (nRF24L01). We will need to use a 1 x USB module that will connect to the computer and monitor the status of said service, if found active, that will send a signal to a GPIO RF module that will trigger the LEDs on a different board. How many services do we need to monitor? There are 2 services that can either be in an on or off state. That means Service A can either be running or stopped and the same with Service B. We can use a different m...

I want to make an automated resin dispenser for a project. It should include a pump and solenoid valve. Exact measurement should be dispensed hence require personnel proficient in fluids, flow rate, arduino, and programming.

arduino based project deadline 26

Hi, I am looking for a machine programmer that can assist in implementing a 9 button keypad into marlin firmware (Arduino IDE) the programming for the shift register is done, just needs to be implemented into marlin which is also partly completed. Thanks