Pwm pulse width modulation receiverJobb

I need a C# application using Microsoft Visual Studio. The application needs to use TCP/IP communications. The application needs to monitor a folder and read any text file or bitmap image ".bmp" file that comes into that folder, open and read the text or bitmap and then send that to another application via TCP/IP. There needs to be another application that receives the text or bitmap...another application that receives the text or bitmap and then writes a new file with the received data into a different folder. I don't care about the interface, it can be very simple. I do need the full applications with source code so that I can modify where necessary. Completion of this project would be 2 visual studio visual C# projects. One project is the sender application and on...

I'm seeking a male Telugu voice-over artist. Strong voice modulation skills and experience in audio recording are preferred. - Ideal Skills: • Telugu Proficiency • Voice Modulation • Audio Recording - Experience: • Prior voice-over experience is advantageous. - Time Commitment: • Consistent progress, no fixed deadline Candidate should have home setup, its full and full remote work. its long term project. Please apply interested people only. Please be prepared to provide a brief sample of your work in your bid.

I am seeking an experienced CAD designer to incorporate four lanes of Qubica AMF flying duck pins into our game room's existing layout. Project tasks: - Working with the dimensions of the room's width, length, and height to create a fully scaled model. - Factoring in existing equipment placements in the game room to ensure a balanced and efficient design. - Using Qubica AMF flying duck pins manufacturer's specifications and diagrams to accurately represent and accommodate the new equipment. Ideal Candidate: - CAD design experience, particularly in interior spaces and including specific equipment details - Understanding of game room or leisure space design beneficial - Familiarity with Qubica AMF flying duck pins or similar equipment is a plus.

...site www.rupertwatts.com. The theme is all installed. However, I need the following: Home Page: To display the Ken Burns Slide show - I need to be shown where I can add my images. Portfolio: To show a drop down of the following, All, Early Years, Senior School, Sixth Form, Arts, Campus, Sport. I need to be shown where I can edit and add images to these portfolio pages. Blog: Single post, Full Width. I need to be shown where to add the blogs Contact Page to show address and email About page to show info about me. I'll add the content. I have a logo which needs to be added to the site too. - Proficient in Wordpress - Experience with ThemeForest and Wordpress theme installation. - UI/UX design skills to ensure the installer is user-friendly. I'll supply login detail...

Create PWM Motor Control PCB Output: SCH, Gerber Files, BOM Files

I'm seeking a male Telugu voice-over artist. Strong voice modulation skills and experience in audio recording are preferred. - Ideal Skills: • Telugu Proficiency • Voice Modulation • Audio Recording - Experience: • Prior voice-over experience is advantageous. - Time Commitment: • Consistent progress, no fixed deadline Candidate should have home setup, its full and full remote work. its long term project. Please apply interested people only. Please be prepared to provide a brief sample of your work in your bid.

...switched simultaneously. I'm looking for a skilled developer who can create a custom WordPress plugin for my personal e-commerce website. The main focus of this project is to enhance the user experience and streamline workflow by enabling: - Automatic synchronization of background variant products to tabpress and size guides. - Dynamic change of product attributes such as SKU, weight, length, width, and height based on selected variants on the product page. - Customization of product selection and display. The ideal candidate for this project should have: - Proficiency in WordPress development and plugin creation. - Experience with e-commerce and product management. - Ability to implement automatic synchronization of product variants. - Skilled in enhancing user experienc...

1-bit delta sigma modulator that converts analog to digital signal for transmission over fiber optical fiber. However the optical transmission part is out of scope, the focus is on delta sigma modulation which currently bandpass and 3rd order. I want to develop current design with MASH/SMASH structure for better results.

I have a set of old drawings in IMG format that I need converted to PDF format that is acceptable to a building dept for upgrade permits. We want to add a deck in front of the garage which will be the width of the garage appx 19' x 15'. If you have experience in architectural drawing, drafting and design, and proficiency in working with PDF formats, then you're the freelancer I'm looking for. Unfortunately, I do not have specific features or elements that I want to incorporate in my deck plan. It'll be great if you can provide some suggestions on possible seating. I'm only looking for help with the drawing and end result would be something I can submit to city of San Diego building dept for a deck that I'm going to build myself.

I'm seeking a prof...statistical data, and particularly focuses on: - **Data Cleaning and Preparation:** You will be responsible for ensuring the data is clean and ready for analysis. - **Data Visualization:** Your tasks will include creating visual representations of the data to make complex ideas more intuitive to others. - **Diagnostic Accuracy, ROC, AUC:** You should be able to analyse diagnostic accuracy and create Receiver Operating Characteristic (ROC) curves, as well as calculate Area Under the Curve (AUC). Ideal candidates will be able to seamlessly blend statistical expertise with hands-on programming in R, ensuring the insights derived are both accurate and actionable. An academic background in statistics is a plus, especially if you’re currently pursuing a S...

I am looking for a Blender expert to modify a parametric rugged box. The goal is to adjust its dimensions (width, height, depth) while ensuring that the changes do not compromise the enclosure. Key requirements include: - Proficiency in Blender: The ideal candidate should be very skilled in using Blender to modify 3D objects, particularly parametric ones. - Familiarity with Enclosure Design: Understanding of enclosure design principles is crucial to ensure the modifications won't affect the structure's integrity. - Attention to Detail: It's imperative that the modifications are precise and do not disrupt the box's functionality. If you're confident in your Blender skills and enjoy working on detailed, precise projects, I'd love to hear from you.

I need a tool that will help me process a large amount of images by cropping them automatically to a landscape format. Project UI Link: Key Features: - Image formats supported: JPEG, PNG - Output dimensions: landscape (width > height) - Automatic detection and cropping of the main subject of the image is preferable or that can be selected as need. Ideal Freelancer: - Proficient in image processing and recognition - Experience with automation scripts - Strong background in image data manipulation - Familiarity with JPEG and PNG file formats. If you have the skills and experience necessary to develop such a tool, please get in touch.

I need create calculator like on page : and implement to my page : It must be only for product in category a-typ. Formula: Width formula: Base price (always for the dimension 90x200) / 90 = value x desired width = price with VAT. Length formula: Calculated width price / 200 = value x desired length = price with VAT. here is JS for this from page dreambed. <script> function calculateCustomPrice(element) { const customPriceInput = ('js-custom-input'); let productId = , location = String() + '?productId=' + productId + '&do=calculateCustomPrice'; for (let input of customPriceInput)

I'm looking for a skilled graphic designer who can adjust my logo to fit specific dimensions of 50.8mm (height) and 20mm (width) with high density, suitable for both print and digital use. The final version of the logo should be available in JPEG, PNG, SVG, and ai formats. Key Requirements: - Adjust the size of the logo to 50.8mm (height) and 20mm (width) while maintaining visual integrity and enhancing the density for crisp display. - Deliver the adjusted logo in high resolution, suitable for both print and digital use. - Provide the final logo in JPEG, PNG, SVG, and ai file formats. - Ensure the logo is visually appealing and professional, reflecting the original branding. Ideal skills and experience for this job include: - Proficient in graphic design software and t...

I'm looking to update my website on a budget and quickly to make it look more modern and appealing to potential clients. I'm having trouble getting the containers to extend from edge to edge, so I'm hoping someone can help me achieve that. If you're interested in working on this project, let's chat and see how we can elevate the site even further in the future. Thanks for your time!

I'm seeking a knowledgeable Arduino and IoT expert to create a sophisticated system for collecting data on water flow. Key functionalities required: - Pulse input data collection, specifically for monitoring water flow. - Understanding of Deep Sleep Mode to save Battery. - Data handling capabilities to efficiently send this information straight to the cloud system. The ideal freelancer for this project must demonstrate vast experience with Arduino programming, IoT systems, and data management. Familiarity with cloud technologies will be a significant plus. Ability to create a robust system capable of handling potential fluctuations in water flow is necessary. The chosen developer will be tasked with not just simple data gathering, but also with transferring these datasets t...

I need an experienced designer who can convert 2 existing posters into vector format using Adobe Illustrator. This is to ensure that the posters can be printed at a size of 120 cm width and 180 cm hight without any loss of quality or pixelation, so the final product is crisp and clear. Key requirements: - Posters are ready and do not need any design changes - Conversion to vector format is the main task - I will be printing the posters at a size of 120 cm width and 180 cm hight, so the vectorization must be of high quality to accommodate this - The final deliverable should be in a format that will not lose quality when scaled, such as SVG or PDF. - Experience with large format printing is a plus The deadline for this project is ASAP. Please let me know if you have any quest...

...switched simultaneously. I'm looking for a skilled developer who can create a custom WordPress plugin for my personal e-commerce website. The main focus of this project is to enhance the user experience and streamline workflow by enabling: - Automatic synchronization of background variant products to tabpress and size guides. - Dynamic change of product attributes such as SKU, weight, length, width, and height based on selected variants on the product page. - Customization of product selection and display. The ideal candidate for this project should have: - Proficiency in WordPress development and plugin creation. - Experience with e-commerce and product management. - Ability to implement automatic synchronization of product variants. - Skilled in enhancing user experienc...

...attached file It creates an image file of the flowchart. Simple example: See attached file The text file has 3 lines as follows: 1 circle 1.5 5.3,1.2 Begin 2 rectangle 6,2 5.3,2.5 Find node that represents the itemset 3 line 1,2 This file would mean to: 1: Draw a circle with radius 1.5 at point (5.3 across,1.2 down) with the word "Begin" in it. 2: Draw a rectangle with width 6 and height 2 at point (5.3 across,1.5 down) with the words "Find node that represents the itemset" in it. 3: Draw a line pointing from 1 to 2 I don't care how the definition works other than how general it is. The above is just to show what I mean. 1. You could provide the flowcharts that some app allows you to make manually. 2. You could provide what the attached 30 files (...

...to compromise the roof lines and exterior. Scope of work- Masterbath- Bumpout for Tub with side roof. Will not affect main roof. Masterbath and Closet reworked and extended this area along with the garage back 5’-0” existing roof pitch will extend. Bedroom 3- Extended this area back 5’-0” and added a pitch roof to the existing roof line. Moved rear porch demising wall over 3 ft to expand the width of this room. Need to resize living room windows next to back door. Prefer Qty.3 3060 windows with 3080 door in living room. No need to update the window and door schedule unless it is automatic. Add windows to 3rd bedroom. Sizes TBD Bedroom 2/Bath 2- Moved the entire closet bath block down and eliminated the 3 rd bedroom closet to create more room in 2nd be...

I'm seeking a skilled PCB circuit designer to create a digital circuit f. The primary function of the circuit is PWM Motor Speed Control Key requirements: Input supply voltage: DC 2.5V-25V The maximum output power: 350W The maximum continuous output current :15A The overload and short circuit protecting current is 25A PWM frequency: 25-30kHz Duty Cycle adjustable: 0-100% The operation environment temperature:-20℃-40℃ Ideal freelancer would have: - Proven experience in digital PCB circuit design - Strong knowledge of signal amplification principles - Familiarity with radio technology and its requirements - Ability to optimize circuits for low gain

I'm currently searching for an experienced AutoCAD Designer who can help craft detailed plans for a golf simulator. The main focus areas are: 1. Swinging Area: You will be provided with specific width and height measurements to guide your design. 2. Integration of Electronic Components: We need plans for mounting and installing the electronics that make the simulation possible. 3. Flooring Material & Lighting Requirements: The design should incorporate the specified materials and suitable lighting for the swinging area. Experience in designing sports simulators or similar environments would be a huge plus. Please, show examples of your previous work in your proposal if available. Succinct and accurate drawing styles are appreciated. Thank you for your interest in my proje...

...Glass, Metal, Wood, acp, aluminium pipe, and acp alternate sheet. Experience with these materials is a must. - The desired color scheme for the facade includes violet (#47143d), golden (#b99750), and white (#ffffff). However, I'm also open to other corporate-looking 3-color palettes. Store dimentions: Height- ground level to ground floor roof= 12 feet, remaining till top= 44 feet, total = 56 feet Width- 50 feet wide (at only ground floor, there are 2 shops having front space of 25 feet each) {refer image} only on ground floor, there is a shop called kp chand jewellers. the rest part of the building is of raaj ratan store. Shop name- Raaj ratan number of floors- ground+4 need design in 3d The example facade image that we gave is only for reference purpose. We don't want...

Job Description: We are seeking an experienced software developer to create code for a power electronics control system. The project involves using an Arduino DUE and the IMC101T T038 motor controller. The software should control and regulate both the grid side and machine side using Space Vector PWM (SVPWM). Communication between the Arduino and other components will be handled via serial communication. Additionally, the system should include a quadrant display using 4 LEDs to indicate whether it is operating in motor or generator mode. All datasheets and circuit diagrams will be provided. Key Responsibilities: Control and Regulation: Implement SVPWM on both grid and machine sides. Grid-side control: Adjustable power factor (cos(φ)), current, and power. Machine-side control:...

...Reference video: - 4. GIF Overlay (Optional) test to add a sequence 4 with below: - Test adding a GIF sequence using the following details: - GIF: istockphoto-977985066-640_adpp_is - Background: url("") - Background Size: Cover - Width: Fixed (1,440px) - Height: Hug (598px) - Padding: 70px 60px 40px 60px - Gap: 40px - Opacity: 0px Colors: - Background: #290E0EB2 Requirements: - The GIF should be exactly 15 seconds in length. - Use smooth transitions between sequences to create a cohesive and visually appealing GIF. - Ensure high-quality footage is used throughout the GIF. - Provide the final GIF in a suitable

To create a precise 3D model of a small-sized charging case for the AirPods Pro 2 in Blender, here's a detailed plan based on your specifications. Specifications Recap: PCB and Battery Dimensions: 33 x 40 x 10 mm AirPods Pro 2 Dimensions: Height (H): 30.9 mm Width (W): 21.8 mm Depth (D): 24.0 mm Design Requirements: The case should connect to the top and be formed like a butterfly. The two circular charging metals at the bottom should be positioned to the left and right. The part of the AirPods Pro 2 that goes into the ears should stick up 15 mm above the case. Steps to Create the 3D Model in Blender: Set Up Blender: Open Blender and delete the default cube. Model the Charging Case: Create the Main Body: Press Shift + A to add a new mesh, select Cube. Scale the cube to the d...

I need a technical expert skilled in Raspberry Pi integrations to create a display of GPS coordinates, IMU data, and set the frequency for a TBS satellite receiver on a 7inch LCD screen. The components for this project are: - GPS module - IMU module - TBS satellite receiver The LCD display should show GPS coordinates and IMU data in real-time. It also needs to set the frequency for the TBS satellite receiver. The Raspberry Pi setup will be powered by a battery, so considering power consumption in the build is important. Ideal skills for this job would include: - Experience with Raspberry Pi integrations - Familiarity with GPS modules and IMU modules - Knowledge of frequencies for TBS satellite receivers - Proficient in power management for computer systems, parti...

Re-Design and Add to our Product Labels (See Attached Examples). Use Different Golf Cart Pictures And/Or Colors To Differentiate Between The Different Models. Each Label Will measure 5 Inch (127MM) Height x 8 Inch (203MM) Width. Key Points For Each Label Are: CanLiFe Lithium Golf Cart Battery * A Single Drop In CanLiFe Lithium Battery Replaces An Entire Set Of Conventional Lead Acid Batteries & Can Operate A Stock Golfcart In Any Terrain. * Assembled In Canada * Backed By A 6 Year Limited Warranty * Estimated Range And Capacity To Be Displayed Prominently * Bluetooth Enabled - Monitor State Of Charge From Your Phone Total of 12 Labels to be created: Front Plaques: CanLiFe Lithium Golf Cart Batteries 36 Volt 56 Amp Hour (2.07 Kilowatt) Capacity 25-30 Kilometer Range 48...

...seeking a talented freelance graphic designer to create a book cover based on a provided sketch. The final cover must adhere to the layout of the sketch, but I need your expertise to enhance it with the right fonts, colors, and images or illustrations that match the sketch’s outline and theme in a more cohesive manner. PROJECT DETAILS: Dimensions: The cover will be designed in 12x18 inches (height x width). Design Elements: - Use the provided sketch as the primary layout guide. - Select and integrate suitable fonts that complement the cover's theme. - Choose a consistent color palette that aligns with the book’s genre and style. - Source or create images/illustrations that fit the sketch’s outline, ensuring they blend seamlessly with the overall design. ...

...the main board. The antenna diameter is 15mm with a hole in the center 4-5mm. The main board is 14mm in width and length is 35mm or less. 1) The reader must read and write password-protected memory blocks in Mifare Classic cards. 2) The reader keeps the password for the RFID cards as a hard-coded constant. 3) The reader has an 4-byte reader ID stored in its EEPROM memory. 4) The RGB LED on the edge of the main board, whose location matches the hole in the antenna. RGB LEDs are connected to the PWM pins of the controller. 5) A waterproof (if possible) speaker must be on the opposite edge of the main board, closer to one side to leave space for wires. The speaker must be connected to a PWM pin of the microcontroller. 6) RS485 interface, half-duplex. 6a) The RS485 com...

...to create an 8-page folded brochure and an offer card for our company. The final deliverables should be vibrant, engaging, and align with our brand identity, enhancing our communication and marketing efforts. Scope of Work: Brochure Design Type: 8-page folded brochure Size: 10 cm width x 16 cm height per page Reference: Attached Reference Content: Provided upon project commencement Style: To be in line with our existing brand guidelines (bright, engaging, informative) Offer on Card Design Size: 10.5 cm width x 14.8 cm height Reference: Reference in attached Photo as well Details to Include: Name, position, contact information, and logo Deliverables: Final designs in PDF format Open files in Adobe Illustrator or Photoshop format Skills Required: Proficiency in Adobe ...

...- Signal Processing: You should be able to process signals effectively, extracting necessary information with precision. - Modulation and Demodulation: Experience with encoding and decoding signals is crucial. - Timing and Synchronization: A meticulous understanding of the coordination of signals over time. - Antennas: A good handle on the properties, function, and deployment of antennas. - Propagation and Noise: Ability to assess signal movements and noise interference. Ideal Candidate: - Proficient in Matlab and its functionalities - Experience in Telecommunications, Satellite, and Sound Wave communication systems - Should have worked on signal processing, modulation, demodulation, and synchronization - Familiarity with various antennas and their applications - Understa...

...React developer to craft a high-performance, single-page website for desktop and mobile. Your expertise in responsive design is crucial to ensure seamless, optimal performance on both. Note:- Please check figma of layout required below. The key features I require include: - Fast loading - Google page speed check has to be 100% for both desktop and mobile - The page is image heavy, hence has to lazy load images correctly - Menu has drop down images heavy. Accordingly loading should be only on mouse over and not interfere with rest of page load. - First part of the page should load very fast. -

...discrete component and use a much better MOSFET to meet the required output of 600V AC, 0.5A, 39kHz Responsibilities: - Improve the LT Spice model for the half-bridge circuit (no rectifier needed), Output is AC and not DC - Conduct detailed simulations to analyze performance - Optimize circuit design based on simulation results The MOSFET part number is SIHP24N80AE-GE3, The PWM controller that will send the pulse to the gate driver is UCC28086D, and the isolated gate driver UCC21550BQDWRQ1. It would be good to use parameters from these components where applicable for a representative test. For example, changing the MOSFET to the one with low Rds On - Drain-Source Resistance will give square output at the section labeled square wave. I have also attached the type of tra...

I'm looking for an expert in Fusion 360 who can help me create a simple model of a box where all side lengths and wall angles are driven by user-defined parameters. Here are the specifics: - All dimensions including length, width, height & depth, along with any angles and proportions must be adjustable via parameters. - Parameter changes must not break the box model. The model should adapt seamlessly to changes in these numerical inputs. - The parameters will be adjusted per Fusion 360 user parameter settings. - Base of the model should be on the XY plane. Ideally, I would like the chosen freelancer to have relevant experience in building parameter-driven models in Fusion 360 and a good understanding of geometric principles. A background in product design or similar ...

We are on the lookout for a highly creative and skilled furniture design specialist who can craft an imaginative and practical 3D plan and cutting layout for a bespoke wardrobe. This project is not just about utility but also about creating a piece of art that enhances the aesthetics of the space it o...Details: Objective: To design a custom wardrobe that maximizes space utilization, offers innovative storage solutions, and is a visually captivating addition to the room. Requirements: The final deliverables will include a detailed 3D model of the wardrobe and a comprehensive cutting plan that can be directly used for manufacturing. Wardrobe should be place in the wall with the window: max: 40 width, please try to integrate in the furniture a bench below the window (with storage) R...

...the downstairs where there is currently three same-size bedrooms all along one side, a kitchen at the back and a living room which you access immediately through the front door. There is a small square toilet and shower room between the back bedroom and kitchen, right in the middle. - there is a beautiful large square and private outdoor space accessed through the kitchen, that runs the full width of the house, with side pathway access from the front garden. There is outside water source. - there is an attic area which can only be accessed from the back garden up a spiral staircase. This is converted currently into an awkward one bedroom/shower room/lounge space. Our primary desire is to bring this into the main home and make it accessible from inside and become the master bed...

I'm on the hunt for an expert in AI voice technology who can help me bring my novel to life via an audiobook. The audiobook is on a larger scale, clocking in at about 12 hours, so durability and attention to details are crucial. Your task will involve incorporating a wide range of AI voices (more than four) to deliver a mo...accents, ensuring that each character’s voice is distinctive. - Can deliver a high-quality, 12-hour audiobook production. - Is attentive to the nuances of the novel and able to bring the story to life. Experience in producing long-duration audiobooks and voice acting would be an advantage. This is a unique opportunity to showcase your skills in a project that combines technology, voice modulation and storytelling. Looking forward to some innovat...

...achieve PWM via VHDL and PS to PL UART communication in the FPGA circuit design. It would be advantageous if you have a strong background in VHDL, FPGA circuit design and specific experience with Xilinx FPGA. Additionally, understanding of PWM and UART communication would be beneficial. Estoy buscando un ingeniero FPGAs y firmware para q haga un pequeño proyecto para hacerlo correr en una tarjeta de desarrollo Pynq-Z2 con el Sw Vivado. Se trata de implementar un PWM de valor de entrada variable, esto en VHDL para cargarlo en la PL de la Zynq. Se trataría de lo siguiente; a través del puerto serie (es una USB FTDI que tiene la Pynq) enviar con mi pc un comando a través de la UART del PS (el micro de la Zynq) y después ese coma...

I'm launching a new brand called GFE Trailers. GFE stands for Good Fortune Endeavors. We offer trailer leasing services for wholesales, retailers, and manufacturers. We are looking for a logo that reflects our brand. We want our primary color to be green with our secondary colors as white, gold, and /or black. We want to create a brand that communicates the following: Hardworking...communication that connects with your target audience Who are our target customers? Manufacturing, Retail, Shippers, Receivers. Logistic companies ( Owner Operators) What size company are your target customers Small to medium sized companies Who is typically the decision maker when it comes to making purchases with businesses like yours? Logistic and Warehouse managers either shipper or ...

I am looking for an accomplished specialist...Include a section on the potential reasons for any detected defects or non-compliance issues that may arise during the factory line process. - Physical Inspection: Systematically report on physical inspection findings. - Comparison Chart: Develop a easy to look at comparison chart with interchangeable headings, mainly focused on dimensions of a product. eg, stainless steel square 1: length:15mm Width:3mm height:30mm. eg2, spinning top : Radius: 30mm, handle radius: 3mm, handle length - 30mm Ideal Skillset: - Extensive experience in report writing - Background in quality control and auditing - Excellent analytical and evaluative skills - Exceptional attention to detail - Ability to present complex information in a clear and straightforwa...

I need a very basic, 3D sketch of a house roof for visualization purposes. I need both the outside view of the roof, and the inside. The house box/frame is a simple rectangle. I have height, width and lenght of the house. I have also the angle of the roof and the dorm-roofs. There will be windows, but no balconys or other external visualisations. Clipped gambrel with dormers on each side of the roof, see example image. We will have a video call while you draw, so that I can give you a constant feedback.

I am interested in finding software or a website that produces flowcharts (for an example see attachment file ). It must allow me to upload a file containing the definition of a flowchart and it creates the flowchart (see attached files ...Just to help you understand, here is a made-up example. A vendor or website produces the attached image when the user uploads file : 1 circle 1.5 5.3,1.2 Begin 2 rectangle 6,2 5.3,2.5 Find node that represents the itemset 3 line 1,2 This file would mean to: 1: Draw a circle with radius 1.5 at point (5.3 across,1.2 down) with the word "Begin" in it. 2: Draw a rectangle with width 6 and height 2 at point (5.3 across,1.5 down) with the words "Find node that represents the itemset" in it. 3: Draw a line pointing from 1 to 2

...of a competent freelancer with proficiency in arduino, particularly for STM32 microcontrollers (specifically the NUCLEO-G491RE model) and ESP32 microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs...

I'm in need of a skilled graphic designer to create a vehicle wrap for my juice truck. Along with the existing logo update/ improvisation. Please share previous work/portfolio close to the inspiration work that we have shared. Key Requirements: - The purpose of the wrap is primarily for information display. - There i...information display in vehicle wraps would be a plus The project outcome should be a modern, sleek and captivating vehicle wrap that successfully advertises my juice truck. We might extend the scope for the best quote and Freelancer once this gig is successful and satisfactory. Pastel color Food truck is for design inspiration. Piaggio auto is the actual vehicle with these dimensions: - Back WIDTH 5 FEET - HEIGHT 6 FEET - Sideboards each side 6 feet length ...

...load it onto the Arduino. There should be a separate potentiometer to control the sound volume. It would be nice if the battery could last an hour or so on a full charge. Once installed into the fire truck, the battery should be able to be recharged through the onboard USB port so as not to have to remove it from the fire truck. Obviously, this would all have to be very small. I have measured the width of the Arduino MKR Zero (about 1") and it should fit within the fire truck no problem. There is limited space above the board for the battery, motor and speakers. Skills and Experience Required: - Expertise in Arduino circuitry and programming. - Past experience in managing LEDs, motor, and sound on a single circuit. - Proficiency in developing and testing circuit patterns. ...

The main goal of this project is to improve our React application so it ...specs only on mouse-over, lets remove that and show that in the card itself, between the laptop image and the hyperlink of the laptop title. Lower the font a little bit and add a special css class to control the style of the specs. b) The cards need a bit more padding/margin so they dont look too crowded with information. Show Details popup: c) Show details popup needs to occupy 90% of the screen width showing the specs in two columns and have a nice border and a thin scrollbar if the content does not all show in one screen. Description/Name should only show first 250 characters with 3 dots and a "more" link that when clicked expands to show all and then shows "less" link, which when clic...

...de la URL var iclid = getParameterByName('iclid'); // Si se encuentra el parámetro iclid, crear una cookie con su valor if (iclid) { createCookie('iclid', iclid, 365); // Se establece la expiración en 365 días } </script> PÍXEL: <img src="${CONVERSION_ID}&orv=${ORDER_VALUE}&cli=${ICLID}&orc=EUR&ver=4.31" width="1" height="1" border="0" style="display:none;"> NOTAS SOBRE LAS TAREAS A REALIZAR: En el pixel el "cid", debe recoger el ID del pedido, mientras que "orv", debe recoger el valor del pedido sin gastos de envío ni impuestos., la variable que se llama "cli" y esta recoge el iclid que estamos creando c...

...solve the problem as follows: <a href="" class="woocommerce-LoopProduct-link woocommerce-loop-product__link"> <img fetchpriority="high" fetchpriority="high" width="650" height="625" src="" class="attachment-woocommerce_thumbnail size-woocommerce_thumbnail" alt="" decoding="async" srcset="" sizes="(max-width: 650px) 100vw, 650px"> <h2 class="woocommerce-loop-product__title">„BlockX“-Tasche</h2> <span class="price"><span class="woocommerce-Price-amount amount"><bdi>21,00<span class="woocommerce-Price-currencySymbol">€</span></bdi>&l...

...(only first letter uppercase) 2.2 The text of the news have to wrap at the end of the word, not interrupting the word 3. Field of actions (aree di intervento) 3.1 The the written texts (Empowerment delle Persone, Empowerment delle Aziende, Empowerment delle Comunità Locali) have to be centred in the middle (horizontal direction) of 3 columns of news 4. Events 4.1 The width of the "Event" box have to be the same as the width of the "News" box (row n. 2) 4.2 The description of the events have to appear and the countdown of the missing days have to be removed 4.3 Insert purple lines after this "Events" row and before the next "Services/Programs" row 5. Services/Programs 5.1 It is necessary to align the arrow and the inscriptio...