Project for Eyersq

Design steel reinforced concrete building structure: > 5 level building (ground floor + 4 story) > Level 1: 3.5m; Level 2-5: 3m; > 596 square meters footprint > floor blueprint: [login to view URL] > arhicad project: [login to view URL] > topography: [login to view URL] > walls: 100mm Metallic Sandwich Isolated Panel > rooftop: tar on concrete slab > slab height between story: 14cm > foundation minimum elevation height: -1.5m & -1 ground elevation difference between back (higher) and front (lower) = -2.5m > foundation ground resistance: 200 kPa > seismic level: 0.2 g > wind pressure: 0.7 kPa > snow: 2.5 kN/m2 > building location: 46.922397, 26.930743 > elevation level 1 (story 0 concrete slab top height): 194.65 Only structure & foundation, no need for exterior design at this point. It's highly important to optimise the overall building cost by reducing materials. The building will need to check on wind, snow and seismic tests for specs in Europa > Romania > Roman (tested within Autodesk Robot Structural Analysis / SCIA). Constructor suggested to test columns at 45x45 - would be easier for him to make. 1. Design all vertical and Horizontal elements. Export building section 2d drawings, including foundation, with element measurements. 2. Generate excel report for elements: type, number of elements, length, unit weight, bar weight, total weight per element, painting area, steel reinforcement kg required 3. Generate excel report from Robot with total material (concrete, metal) requirements: type, total weight, total volume (m3 for concrete), per level (foundation, story 1, story 2, rooftop). It’s important to have a realistic report per level because it’s possible the last 1 or 2 levels won’t be approved by city council. 4. Design Connections and Steel Reinforcements. 5. Design footings, grade beams, slabs. 6. Make Optimisation to all sections to be minimum to reduce cost 7. Structural drawings, elevations, plans and sections