Find Jobs
Hire Freelancers

controlling a motor using labview

€30-250 EUR

Avslutat
Publicerad ungefär fem år sedan

€30-250 EUR

Betalning vid leverans
Hi , Emma here , background semiconductor engineering . Project is a basic labview vi to control pressure in a vacuum chamber . Take a voltage reading in from a vacuum guage which represents a pressure reading , compare it to a setpoint pressure , and based on the result control a motor to throttle a butterfly valve on the pumping line until the incoming pressure matches the setpoint . The vacuum chamber will be pumping continuously and have a continous gas inlet to create the pressure . While the pressure reading can be captured through the Daq assistant , how can i setup the PID control of the motor to allow the butterfly valve throttle over and back to match the incoming pressure versus the setpoint , and hold it steady for couple minutes .
Project ID: 18518899

Om projektet

7 anbud
Distansprojekt
Senaste aktivitet fem år sedan

Ute efter att tjäna lite pengar?

Fördelar med att lägga anbud hos Freelancer

Ange budget och tidsram
Få betalt för ditt arbete
Beskriv ditt förslag
Det är gratis att registrera sig och att lägga anbud på uppdrag
7 frilansar lägger i genomsnitt anbud på €155 EUR för detta uppdrag
Använd avatar
Hello Emma, I would like to take this challenge. Can I have remote access via teamviewer to your computer where the system is running? Let me know if you willing to discuss details. We should agree also few milestones. Best regards, Nicolae
€200 EUR Om 15 dagar
4,9 (12 omdömen)
4,4
4,4
Använd avatar
Hi. I have good experience on LABView NXG, MyRio. I have done compressed natural gas machine project, and Automatic Human tracking on LabView related to your project. I have done list of other projects on Labview. Thanks
€160 EUR Om 3 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
Good experience working on simulations from the various software's, I would be delighted to work with you on this. thanks
€150 EUR Om 3 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
I have experience in development of LabView program with control via Ni-daqmx driver. First, check the stability of the closed system. Pid controller in LabView to create.
€248 EUR Om 10 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
Hi Emma! It is a fairly simple task. I am an CLAD certified Electrical Engineer with Masters in Controls. I can help you out in the development of your project. Please know, i have done sensor value acquisition using DAQ and then control of PID on the output motor using DAQ too. Looking forward to hearing from you soon. Regards.
€120 EUR Om 5 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
Its so easy i can do it for you. Iam a professional labVIEW programmer with alot of experience on control specially the Fuzzy and PID controls.. Hope to hear from you soon
€55 EUR Om 2 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
I am CLD certified professional having an experience of more than 7 years of experience in developing applications in Labview, money is not an issue for me I just want to start my first freelance prjt
€155 EUR Om 3 dagar
0,0 (0 omdömen)
0,0
0,0

Om kunden

Flagga för IRELAND
Dublin, Ireland
0,0
0
Medlem sedan jan. 13, 2019

Kundverifikation

Tack! Vi har skickat en länk för aktivering av gratis kredit.
Något gick fel med ditt e-postmeddelande. Vänligen försök igen.
Registrerade Användare Totalt antal jobb publicerade
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Laddar förhandsgranskning
Tillstånd beviljat för geolokalisering.
Din inloggningssession har löpt ut och du har blivit utloggad. Logga in igen.