Design/Engineering Drawings Needed for a DC Motor

Slutfört Publicerat 4 år sedan Betalades vid leverans
Slutfört Betalades vid leverans

Looking for 2D Design, Manufacturing, Engineering Drawing and 3D Design Drawings for a DC Motor.

The drawings will be used to build a prototype, upon successful tests of the Prototype Motor, payment shall be completed.

The variable/flexible parameters are given below :

1. Power : As per the design requirement

2. No of Poles : As per the design requirement

3. Current : As per the design requirement

4. Outer Casing Maximum Diameter : As per the design requirement

But the parameters listed below need to remain the same :

1. Voltage : 24 Volts

2. Speed : 6000 RPM

3. Torque : Min 4.5 N-m (at 2000 RPM).

4. TYPE : TENV (Totally Enclosed Not Ventilated)

5. Duty : Minimum 3 min running at Max Torque

6. Protection : IP66 and IP69K acc. to DIN 40050.

7. Insulation Class : F (155 deg.C)

8. Direction : Bi-Direction

9. Noise Level : <= 56 Db(At 1m Dist.)

10. Shaft Diameter : 80mm (Negotiable)

11. Maximum Overall Length : 110mm (Negotiable)

Looking for 2D Design, Manufacturing, Engineering Drawing and 3D Design Drawings for a DC Motor.
The drawings will be used to build a protoype, upon successful tests of the Prototype Motor, payment shall be completed.

The variable/flexible parameters are given below :

1. Power : As per the design requirement
2. No of Poles : As per the design requirement
3. Current : As per the design requirement
4. Shaft Diameter : <= As per the design requirement
5. Outer Casing Maximum Diameter : As per the design requirement
6. Maximum Overall Length : As per the design requirement

But the parameters listed below need to remain the same :

1. Voltage : 24 Volts
2. Speed Range : 3000 - 5000 RPM
3. Torque : Min 6.0 N-m (at 2000 RPM).
4. TYPE : TENV (Totally Enclosed Not Ventilated)
5. Duty : Minimum 8 min running at Max Torque
6. Protection : IP66 and IP69K acc. to DIN 40050.
7. Insulation Class : F (155 deg.C)
8. Direction : Bi-Direction
9. Noise Level : <= 56 Db(At 1m Dist.)

Looking for 2D Design, Manufacturing, Engineering Drawing and 3D Design Drawings for a DC Motor.
The drawings will be used to build a prototype, upon successful tests of the Prototype Motor, payment shall be completed.

The variable/flexible parameters are given below :

1. Power : As per the design requirement
2. No of Poles : As per the design requirement
3. Current : As per the design requirement
4. Outer Casing Maximum Diameter : As per the design requirement

But the parameters listed below need to remain the same :

1. Voltage : 24 Volts
2. Speed : 6000 RPM
3. Torque : Min 4.5 N-m (at 2000 RPM).
4. TYPE : TENV (Totally Enclosed Not Ventilated)
5. Duty : Minimum 3 min running at Max Torque
6. Protection : IP66 and IP69K acc. to DIN 40050.
7. Insulation Class : F (155 deg.C)
8. Direction : Bi-Direction
9. Noise Level : <= 56 Db(At 1m Dist.)
10. Shaft Diameter : 80mm (Negotiable)
11. Maximum Overall Length : 110mm (Negotiable)
Looking for 2D Design, Manufacturing, Engineering Drawing and 3D Design Drawings for a DC Motor.
The drawings will be used to build a protoype, upon successful tests of the Prototype Motor, payment shall be completed.

Looking for 2D Design, Manufacturing, Engineering Drawing and 3D Design Drawings for a DC Motor.
The drawings will be used to build a prototype, upon successful tests of the Prototype Motor, payment shall be completed.

The variable/flexible parameters are given below :

1. Power : As per the design requirement
2. No of Poles : As per the design requirement
3. Current : As per the design requirement
4. Outer Casing Maximum Diameter : As per the design requirement

But the parameters listed below need to remain the same :

1. Voltage : 24 Volts
2. Speed : 6000 RPM
3. Torque : Min 4.5 N-m (at 2000 RPM).
4. TYPE : TENV (Totally Enclosed Not Ventilated)
5. Duty : Minimum 3 min running at Max Torque
6. Protection : IP66 and IP69K acc. to DIN 40050.
7. Insulation Class : F (155 deg.C)
8. Direction : Bi-Direction
9. Noise Level : <= 56 Db(At 1m Dist.)
10. Shaft Diameter : 80mm (Negotiable)
11. Maximum Overall Length : 110mm (Negotiable)

Elektroteknik Electronic Design Produktdesign

Projekt-id: #19599511

About the project

22 offerter Distansprojekt Aktivt 4 år sedan

Tilldelades:

KartikSheladiya

Hello there,\r\nGreetings!\r\n\r\nI am a motor designer by profession and can provide you with the electromagnetic design of a motor as per the performance requirement.\r\n\r\nPlease share enough details with me to dis Mer

$500 USD inom 17 dagar
(32 omdömen)
6.6

22 frilansare har lagt bud på i genomsnitt $992 för det här jobbet

ashrafshekh

Hello, Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulation, MATLAB, desig Mer

$1125 USD inom 7 dagar
(46 omdömen)
7.2
bchandra1955

I am already similar design projects Professional engineer with 40 years of design and development experience can take care ................................................

$999 USD inom 21 dagar
(67 omdömen)
6.1
thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic p Mer

$1500 USD inom 7 dagar
(16 omdömen)
5.4
mervekg

Hello. I am a physics engineer studying a master program at manufacturing engineering. I have a deep knowledge about both working principle of DC motors and manufacturing processes. I can design a DC motor with a gear Mer

$1111 USD inom 30 dagar
(4 omdömen)
4.9
irfanshekh

Hello, Greetings for the day, I can design you the DC model with the required outputs, please come in chat to discuss more and award me the project, I will be waiting for your message. I have 7 years of experien Mer

$1250 USD inom 20 dagar
(3 omdömen)
3.9
Amare06

Unfortunately, I have done thus project. You can see my portfolio I will follow thus steps for your project 1. Preliminary design Calculation (sizing, load calculation etc…) 2. 3D modeling using SolidWork 3. Any A Mer

$750 USD inom 20 dagar
(3 omdömen)
4.9
Logeshguru

I'm a cad designer and I'm very faster to creation of model in solid works. I had two years experience in solid works. Now I'm currrently working in solid works. Software. My nature of work is based on requirement I cr Mer

$1111 USD inom 15 dagar
(0 omdömen)
0.0
UzairWali15

Design engineer related to machines. Design car models & ic engines. Motors or mechanical machines. Very fast and offers you files of any format with detailed dimensions and project results. Relevant Skills and Experi Mer

$1250 USD inom 7 dagar
(0 omdömen)
0.0
ismailgrbz9

hello I am an Msc. Manufacturing Engineer. I am experienced in 7 years. I have performed several mechanical design, tests and FEM simulations. I can use CATIA, AutoForm and Solidworks very well. I think I can help you Mer

$1111 USD inom 15 dagar
(0 omdömen)
0.0
andreiarseniu

Hello, My name is Andrew, i'm 24 years old and i live in Romania. I am currently working as a 2D engineer in Romania at a German company called Marquardt, located in Sibiu. I have started for now 2 projects , one Mer

$780 USD inom 14 dagar
(0 omdömen)
0.0
EOLASSOLAS

The required motor can be designed. it can also be analysed virtually, before prototyping. I use CAD/CAM, Solidworks, Inventor, CATIA etc for designing. I'd like to be a part of this project. I have Mechatronics Mer

$1250 USD inom 12 dagar
(0 omdömen)
0.0
yousryamr

I am a Chartered Engineer and Member of the Institution of Mechanical Engineers of UK. I have 13 years of experience in engineering and design. I am experienced in FEA and 3D modelling. Based on my M.Sc. degree I am ex Mer

$750 USD inom 7 dagar
(0 omdömen)
0.0
sgDesigners

Hello! I am an Autodesk expert, CAD designer, and mechanical engineer. I usually use Autodesk Inventor, CATIA, SolidWorks, Cura, ZBrush, KeyShot, Autodesk CFD and AutoCAD which are very powerful tools and here is what Mer

$1000 USD inom 18 dagar
(0 omdömen)
0.0
rushabhdoshi1995

I am worked in a motor manufacturing company as design engineer and this will make my bid stronger

$750 USD inom 12 dagar
(0 omdömen)
0.0
Minimohan123

I have 22 years of experience in Word, Excel, Power point presentation, Autocad 2D drawings in Electrical Engineering.

$900 USD inom 7 dagar
(0 omdömen)
0.0
kasaiengineering

Dear sir / Madam I am Bhuvanesh Kumar S from KASAI ENGINEERING SOLUTIONS. We are offshore mechanical design service industry. We are providing services like. New product development Reverse Engineering 3 Mer

$1444 USD inom 5 dagar
(0 omdömen)
0.0
dinesh130786

Hello sir, welcome i gone through task specified, i would like to do this task as per my ability and my knowledge. My brief experience are given here as below- Hi i am mechanical design engineer having more than 10 yea Mer

$750 USD inom 30 dagar
(0 omdömen)
0.0