Project to show number on seven segment with logic gates and flip flops

I need to project simulation on multisim to show a number of 2017005 Firstly it shows 2017 with clock counter and flip flops each number be displayed for one secong then a buzzer tone alarm starts for 4 second then the rest of the number is displayed (005) for one second for each number too Attached to this circuit we need a comparator to check if (2017005) is odd or even with leds And to check if 2017 > 2018 or 2017 < 2018 with leds too *detailed requirments* ▪ Design a synchronous counter counts the sequence of your ID number from left to right. ▪ Your full identification number (each number separately) is displayed on a seven-segment unit for a second, so that the first four numbers are displayed through the counter and then the rest of your number is displayed. ▪ During the display, the fourth number from the left will be recognized in your ID (to define the year you join the academy) by means of a decoder that gives an alarm (Buzzer tone) for 4 seconds and then completes the display of the rest of your number. ▪ Each number is displayed on a seven segments unit for a second, the clock must be designed to has a periodic time of 1 second ▪ The design recognizes if your number is odd (a green LED lights up) or even (a yellow LED lights up). ▪ The design decides if the year of joining the academy before 2018 (then lights up a blue LED), or if 2018 and beyond (then lights up a red LED) No arduino or word generator can be used