Find Jobs
Hire Freelancers

I need a PLc and SCADA engineer. Need to upgrade the current PLC 1500 and upgrade SCADA

$20000-50000 AUD

Avslutat
Publicerad ungefär fyra år sedan

$20000-50000 AUD

Betalning vid leverans
Located in Melbourne western suburbs
Project ID: 24022249

Om projektet

15 anbud
Distansprojekt
Senaste aktivitet fyra år sedan

Ute efter att tjäna lite pengar?

Fördelar med att lägga anbud hos Freelancer

Ange budget och tidsram
Få betalt för ditt arbete
Beskriv ditt förslag
Det är gratis att registrera sig och att lägga anbud på uppdrag
15 frilansar lägger i genomsnitt anbud på $31 670 AUD för detta uppdrag
Använd avatar
Hi, Quite solid budget that allows visiting Australia for couple days :) Do you have sources, schematics from current installation? Thanks, ilya
$35 000 AUD Om 7 dagar
5,0 (6 omdömen)
6,2
6,2
Använd avatar
hi I am professional automation engineer I can guide you for your project and I can prepare electrical drawings PLC programs and scada design
$22 222 AUD Om 10 dagar
4,8 (13 omdömen)
6,0
6,0
Använd avatar
Dear friend. I am ready to accomplish this task. I have a lot of knowledge in writing programs for PLCs and SCADA. I have excellent knowledge of programming languages such as LD, CT, FBD. In my portfolio you can see finished projects designed for different industries of automation. I will be glad to assist you in solving your problem. If you can, please send me a task and I will be able to specify the cost and timing of the task. Thank you very much.
$35 000 AUD Om 7 dagar
5,0 (28 omdömen)
5,4
5,4
Använd avatar
We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • Multisim • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards. Also we have good command over REPORT WRITING, We can show you many samples of our previous reports. We can discuss further details in the message box.
$35 000 AUD Om 7 dagar
4,7 (34 omdömen)
5,5
5,5
Använd avatar
Specialized in Automation Engineering with a solid background in Electrical Power Engineering, over 14 years of work experience gained throughout multiple Automation platforms (Rockwell, Schneider, and Siemens) achieving various types of projects functions & designs (Oil/Gas/Material processing, Energy/Power Management Systems [EMS/PMS], Manufacturing Processes, etc…) and using my leadership capabilities for managing projects in all sizes and scales (from turnkey projects to small services). Please have a look over my portfolio.
$20 000 AUD Om 30 dagar
5,0 (4 omdömen)
4,1
4,1
Använd avatar
Hello, i m automation engineer and i have finished many projects i know siemns plcs,hmi,allen bradley plcs,hmi,schineder plc,hmi,omron plcs,mitsubishi plcs so i can do just write me we can discuss more
$20 000 AUD Om 20 dagar
5,0 (9 omdömen)
3,2
3,2
Använd avatar
hi ! Among others, I worked for Amazon with microLogix L33R Rockwell PLC and SCADA WinCC on parcels conveyance and sorting machines. Those machines have more than 100FB and FC so your machine should be straightforward for me to update. Let me know if you are interested to discuss further my offer and experience
$44 444 AUD Om 30 dagar
5,0 (1 omdöme)
1,6
1,6
Använd avatar
Thank you for viewing. Can help with this. Have several Micrologix1500 units with us already & also the newer Micrologix or CompactLogix units also. If you like to migrate /upgrade to a different product, please advise also. Can also help with SCADA side as well. Have worked with almost all of SCADA systems & have migrated from severals to others. Also, can provide a Microsoft SCADA (if acceptable) which has no run time royalties. If you provide the existing programs, system architecture dwg, then can revert with a better response. Will provide 10 hours for free consultation. Have a product that will help migrate to newer system w/o shutdown of running system.
$20 000 AUD Om 7 dagar
5,0 (1 omdöme)
1,1
1,1
Använd avatar
We are a company which can handle Energy efficiency enhancement projects, Controls with the help of PLCs. We already having the experience of DCS, PLC and Drives in lot of implementation. Automation projects have employed controller-centric distributed control system architectures. This approach creates dependencies between project tasks that complicate late changes. So PLC and DCS programming should know the details prior to acceptance to go forward with the project. Then only the schedule will be finalized. Or With the schedule , work force can be increased to finish the programming and implementation . The following details required to accept the project or if you employ us we shall start the discussions and start the planning and specification drawn phase. 1. Specification with exisitng details 2. For DCS no of tags 3. DCS and PLC specification 4. Type of industry
$32 000 AUD Om 60 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
Dear client I can help you to finish your project but i need more details about it
$36 666 AUD Om 30 dagar
0,0 (1 omdöme)
0,0
0,0
Använd avatar
HI I'm Experts as {PLC and SCADA} programer Where I work on the following programs (TIA portal & STEP7 & WIN CC & LABVIEW) and other programes
$30 000 AUD Om 5 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
I am semi-retired and do not want to be over committed. Willing to invest 20 hours a week on project. Prefer to work on a milestone basis. I am looking for something in the small project area using my A/B micrologix experience. Please let me know the details of what needs to be done and what tools I am to supply. What information will you provide so that I can determine if I can provide you your acceptable solution? What is the current SCADA system?
$22 222 AUD Om 100 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
Hello Sir, We are an Instrumentation and Control company with vast experience in PLC and SCADA programming design, panel building and project management. As we are a USA based company we are very familiar with the AB PLC family. I can provide a better and fairer price if you describe the scope of work in this project. Do you need drawings of a new design, PLC program, Scada design, etc? Do you need us to provide the licenses for new PLC and SCADA software? Do you need us to help you acquire the new parts? Are you able to provide the current electrical and process drawings? "As build" drawings, will be great. Are you able to provide a functional control description for the process you are expecting to control/monitor? If not, we can write one for you.
$50 000 AUD Om 10 dagar
0,0 (0 omdömen)
0,0
0,0

Om kunden

Flagga för AUSTRALIA
Toorak, Australia
0,0
0
Medlem sedan feb. 21, 2020

Kundverifikation

Tack! Vi har skickat en länk för aktivering av gratis kredit.
Något gick fel med ditt e-postmeddelande. Vänligen försök igen.
Registrerade Användare Totalt antal jobb publicerade
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Laddar förhandsgranskning
Tillstånd beviljat för geolokalisering.
Din inloggningssession har löpt ut och du har blivit utloggad. Logga in igen.