Find Jobs
Hire Freelancers

I would like to hire an Arduino Engineer to create a wireless Camera controller

€750-1500 EUR

Avslutat
Publicerad över fem år sedan

€750-1500 EUR

Betalning vid leverans
I need an experienced Arduino programmer who can do the following: Program a Moteino with Ethernet shield ([login to view URL]) to fetch camera contol data from an ATEM vision mixer via an existing library for Arduino ([login to view URL]) and send this wireless to asecond Moteino connected to an Blackmagic Arduino shield that sends this data via the SDI port to the camera (existing Library for Arduino: [login to view URL]) What has to be done: Provide some info on how to connect a Ethernet shield to the Moteino (3,3V Problem). Create a sketch for the #1 Moteino that is connected to the Ethernet and to the ATEM switcher Create a second sketch for the #2 Moteino that is mounted to the camera. Moteino #1 should have a simple Webinterface that allows to specify the IP Adress of the Moteino and the IP Adress of the ATEM switcher and the camera number that it is listening to. The system has to send all relevant camera data to the camera such as iris, black level, shading parameters, shutter, gain setting, white balance, tally etc. - all accessible via the existing Skaarhoj arduino library. So it is simple programming relying on existing librarys. The #1 Moteino should send the data only if something changes on the ATEM switcher. And it should send it as long as it doesn't get a received signal from the #2 Moteino.
Project ID: 18300742

Om projektet

13 anbud
Distansprojekt
Senaste aktivitet fem år sedan

Ute efter att tjäna lite pengar?

Fördelar med att lägga anbud hos Freelancer

Ange budget och tidsram
Få betalt för ditt arbete
Beskriv ditt förslag
Det är gratis att registrera sig och att lägga anbud på uppdrag
13 frilansar lägger i genomsnitt anbud på €1 220 EUR för detta uppdrag
Använd avatar
Hi, I hope you are doing well. I have expertise in Motenio Programming, with LoRa interface. Also I have worked with camera interface and transferring images using UWB wireless modules. I have reviewed your project requirements and would like to discuss it further. Looking Forward, Khawaja
€1 500 EUR Om 20 dagar
4,8 (72 omdömen)
6,7
6,7
Använd avatar
Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with Arduino, I have made many Arduino projects, so I am sure I can do a good work for you. Good communication with my clients it is a top priority for me. If you have any doubt or want to see more of my work I’ll be here. Contact me for more info.
€1 250 EUR Om 20 dagar
4,9 (9 omdömen)
5,7
5,7
Använd avatar
First of all, I have to say that I don't work with ATEM switcher nor Blackmagic Arduino shield before. If you're looking for someone with existing experience about that, I am not the right person. I only worked with Moteino dualoptiboot and RFM69 before. Second, I believe that with the existing libraries for BMDPROTOCOL and Blackmagic, it is do-able. The solution is: 1. Connect ATEM to a WiFi router. Alternately, use an IOGEAR Universal Ethernet to Wi-Fi Adapter or a cheap TP-Link TL-WA850RE to connect to the Ethernet port of the ATEM to convert Ethernet to WiFi. 2. Replace Moteino #1 by an ESP8266. This is 80MHz WiFi MCU with much more RAM to implement a nice web interface for any configuration. A RFM69 module is connected to ESP8266 as well. 3. ESP8266, via RFM69, send data to the 2nd custom build arduino-like board with RFM69 and then connect to the Blackmagic shield. Another way is - if the range is not too far. The ESP8266 can also talk to the 2nd ESP8266 via WiFi and we can get rid of RFM69. Limitation of my solution: - The custom board must be built to make it nice and compact. - The library BMDPROTOCOL might need to be modified/ported to work with WiFi. If you have any question, pls let me know. Pls notice that my cost just cover the software development and the circuit schematic design. To design and make PCB or prototype board + shipment, additional cost will be applied. You'll need to work with me to debug as I don't have ATEM nor Blackmagic. Thank you, Anh
€1 500 EUR Om 20 dagar
4,9 (23 omdömen)
5,3
5,3
Använd avatar
Dear Sir I am an Electrical Engineer and I have 12 years of experience in embedded device design and development. This task is a piece of cake. Kindly discuss in detail with me over chat. Best regards. Muhammad Shahid
€1 000 EUR Om 20 dagar
5,0 (3 omdömen)
5,2
5,2
Använd avatar
hello,how are you. i read your bid carefully. i am c/c++, arduino expert and have full experience for 10 years. c/c++, arduino is my top skill and i can build your project by using that skills. i can provide most quality and high speed. if you want to success, please contact me. Then, I will give you good result to the proposals. hire me.
€1 250 EUR Om 20 dagar
5,0 (1 omdöme)
4,9
4,9
Använd avatar
Hi. I'm an electronic engineering student from Argentina. I've been working in freelancer.com for more than two years, and I've completed more than a dozen projects, all with good recommendations, you can check my profile. You will get from me the best effort to deliver a project that is up to your expectations and receive a good rate from your part. Please, if you have any questions, feel free to ask me! Regards, Esteban.
€1 000 EUR Om 90 dagar
4,7 (10 omdömen)
4,0
4,0
Använd avatar
I have made projects like this and have prior experience in the modules which are to be used in the projects. I will complete this project on time as said. So please provide us with this project.
€1 000 EUR Om 25 dagar
4,9 (3 omdömen)
2,2
2,2
Använd avatar
Greetings! I am an electronic engineer and having 3+ years of experience of working as embedded engineer. I am well versed in Arduino Ide programming, sensor integration, raspberry pi all models, python, embedded c, processing ide. I have Experience of Working on all models of arduino. I've build self balancing robo with remote control, tricopter, 3d printer, finger print sensor based bike automation etc. As I am new on freelancer so I would request you with all my kind heart please give me a chance I would provide you best service. Money is not my concern I need to make a good profile because I am new on freelancer. It will be sincerely pleasure to hear back you soon. I am waiting for your positive response. Thank you so much. Best Regards Saurabh
€750 EUR Om 7 dagar
5,0 (3 omdömen)
1,8
1,8
Använd avatar
Good afternoon I can help you with the project. My Experiences: --------------------- *5+ years of surveillance technology. I have built mobile surveillance platforms that was deployed widely in central america. * I have been working with arduino since 2014, but i am working with ATMEL chips since 2007. to connect an ethernet shield, to a moteino, please connect the moteino first to a raspberry pi or a nano pi and use that as a bridge. a shield is known to cause trouble with the RFM69. Price and contact : ------------------------ I am open for negotiations. My whatsapp : + 49 151 290 40 348 drop me a line if you want. I speak both english and german.
€1 111 EUR Om 10 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
Hello Dir I have a good experience with arduino, and i can maked any code you need we can discuss your project please? thank you Aymen
€1 250 EUR Om 30 dagar
0,0 (0 omdömen)
0,0
0,0
Använd avatar
Hello Sir, I am an embedded developer and have completed several IoT and embedded project successfully. I have gone through your project requirement and its an interesting project. And i very enthusiastic to work on this project with you. I have good expertise on ESP32 controller. And i will ensure you i am very hard working and willing to complete what i start to end. Please share your views regarding my proposal.
€1 500 EUR Om 20 dagar
0,0 (0 omdömen)
0,0
0,0

Om kunden

Flagga för GERMANY
Leverkusen, Germany
0,0
0
Medlem sedan dec. 5, 2018

Kundverifikation

Tack! Vi har skickat en länk för aktivering av gratis kredit.
Något gick fel med ditt e-postmeddelande. Vänligen försök igen.
Registrerade Användare Totalt antal jobb publicerade
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Laddar förhandsgranskning
Tillstånd beviljat för geolokalisering.
Din inloggningssession har löpt ut och du har blivit utloggad. Logga in igen.