Piston design projectJobb

Filter

Mina senaste sökningar
Filtrera:
Budget
till
till
till
Typ
Kompetens
Språk
    Jobbstat
    433 piston design project jobb har hittats, med prissättning USD

    I'm seeking an expert animator to create an informative short video, under a minute, to illustrate how certain engine technology parts work. Specifically, the animation should focus on the piston and cylinder, and should also incorporate some graphs and electrical parts. Your approach should be cartoon-like 2D graphics, ensuring the mechanical processes are communicated clearly with an engaging aesthetic. Ideal Skills & Experience: - Proficiency in 2D animation - Knowledge about engine parts or mechanical systems would be a plus - Ability to create clear, informative, and engaging animations - Experience with creating graphs and electrical parts in animation Your creativity and input would be highly appreciated, however, please adhere to the specified animation style a...

    $187 (Avg Bid)
    $187 Snittbud
    53 bud

    As a manufacturing company, we are currently in need of a proficient metallogist to join us in an engaging project. We are in the process of casting piston rings from Spheroidal Graphite Iron, and need an expert in the field to ensure accuracy and efficiency in our process. Tasks will include: - Conducting thorough laboratory testing - Analyzing metal samples - Identifying any emerging material defects We do not have a specific quantity in mind at the moment for the number of piston rings to be cast, so we will need to rely on your expertise and advice to determine the appropriate output levels. Ideal candidates should: - Have a solid background in metallurgy, particularly with Cast Iron - Be able to effectively interpret and analyze test results - Have exceptional...

    $102 (Avg Bid)
    $102 Snittbud
    2 bud
    A 3drawing editied Avslutades left

    I have a 3d piston drawing i need it edit to have a few holes in it

    $15 (Avg Bid)
    $15 Snittbud
    68 bud

    ...Certificate, Slash Flight School Time & Expenses, and Unlock Your License to Fly!" This book is more than just a guide; it's a beacon for aspiring pilots, guiding them through the exhilarating journey of earning their wings. Your mission, should you choose to accept it, is to create a book cover that breaks away from the conventional, textbook-style designs saturating the market. We're looking for a design that's both creative and minimalistic, reflecting the essence of aviation while resonating emotionally with our readers. The cover should instill confidence, evoke excitement, and reassure readers that this book is their ultimate co-pilot on the journey to becoming a private pilot. SYNOPSIS: "Become a Private Pilot" is not just a guide-- it&#...

    $50 (Avg Bid)
    Garanterad
    $50
    401 bidrag
    Project , AccionRacing Avslutades left

    hola, ya hemos hablado por el chat, de todas formas te escribo lo que necesito que tengas en cuenta a la hora de que lo hagas, que sea sencillo por que luego voy hacer el logo a laser en chapa , quiero que me envies distintos diseños, la empresa se dedica hacer suspensiones y motores de competicion. queria que se añadiera algo de un motor tipo : biela , piston, cigüeñal. Tambien queria añadirle algo de un amortiguador. gracias.

    $65 (Avg Bid)
    $65 Snittbud
    1 bud
    UDF function Avslutades left

    I am looking for a skilled freelancer to write a UDF in ANSYS FLEUNT. Programming Language: - The UDF ca...be written in C. Specific Requirements: - I am open to suggestions and trust the freelancer's expertise in determining the specific requirements and features of the compiler. Timeline: - The desired timeline for the completion of this project is within 1 day. Ideal Skills and Experience: - Strong knowledge and experience in compiler development - Proficiency in the chosen programming language for the compiler - Ability to work efficiently and meet tight deadlines Problem Description: UDF has to be written and compile in the ANSYS FLUENT. The piston is moving in X direction at the speed of 1000mm/sec. The mesh technique is layering. write the UDF function ...

    $87 (Avg Bid)
    $87 Snittbud
    7 bud

    I am in urgent need of forklift repair services. The forklift is currently inoperable. It is an electric forklift. See attached name plate for manufacturing model number/serial number. For the bid, please include all anticipated costs (labor, parts, etc.). If more information is needed from us before you can provide an accurate q...can provide an accurate quote/bid, let us know and we will provide. Issue is likely with the hydraulics/hydraulic pump. Symptoms are as follows: 1. Difficult to turn the steering wheel 2. The mast shakes when lifting loads 3. Hydraulic fluid leaks from fluid spout Recent repairs completed: 1. Replaced a total of 3x hydraulic hoses 2. Replaced hydraulic oil filter 3. Replaced steering piston in the back of the forklift 4. New battery (as of sp...

    $250 - $750
    Lokalt
    $250 - $750
    0 bud

    ...Rinsing Filling Capping Machines to undertake a custom project for a beverage production line that deals with Basil Seed Drinks and Nata de Coco with jelly chunks. Key Requirements: • A machine capable of handling two-phase filling processes: basil seeds/jelly chunks followed by the beverage, at a rate of 40 BPM for efficient rinsing and draining. • Adjustable rinsing capabilities to use air (ionized for particle discharge), water, or hot water, with the flexibility to choose between these options. • Advanced sensing and pneumatic systems to control bottle movement and filling, accommodating different bottle materials (glass and plastic). • A piston filler setup with a pneumatic cylinder, housing, rotary valve, and adjustable piston fillers...

    $330 (Avg Bid)
    $330 Snittbud
    8 bud

    I'm looking for an experienced freelancer to help me with a project in Ansys workbench and Adam’s view both . Specifically, I need help with intermediate level analysis. I have time constraints for this project which is deadline is 30 November 2023 , . Any experience in meshing and/or optimization would be beneficial . If you think you have the expertise and knowledge to assist me with this project, then please reach out and let me know. I'm eager to get started!and as provided in the sketch below is a pump and in that pump the part which needs to be done these analysis is the piston and piston rod

    $212 (Avg Bid)
    $212 Snittbud
    24 bud

    Project Overview The Electric Generators Dealer and Maintenance Service website is a comprehensive digital platform developed to support the operations of an electric generators dealership and maintenance service provider. This platform is designed to enhance efficiency, streamline processes, and foster improved communication with employees, clients and suppliers. Key Features Branch Management: The system empowers you to create and manage multiple branches, each with specific location details, contact information, and branch-specific data. Inventory Management: Efficiently manage stocks for generators, generator engines, and spare parts, with capabilities for tracking stock levels, procurement, and usage. Also some items in the inventory might have a relation to other items for...

    $1236 (Avg Bid)
    $1236 Snittbud
    199 bud

    I am looking for an SEO expert to improve the ranking of my website through off-page optimi...least. python training in Kolkata best Python training institute in Kolkata Python Training Institute in Kolkata Graphic Design Course in Kolkata Graphic Design Training Institute in Kolkata Best Graphic Design course in Kolkata mern stack training in Kolkata MERN Stack Course in Kolkata Best MERn stack Training Center in Kolkata Full Stack web development course in Kolkata Best Full Stack web development course in Kolkata Full Stack Training Institute in Kolkata I need report every month with details Like what did you do and also where did you place the links etc. Tell me how much will you charge for the above-mentioned keywords for getting on 1st or 2nd piston...

    $74 (Avg Bid)
    $74 Snittbud
    63 bud

    ...mechanical engineer to help me design the gap between the cylinder and piston head, as well as a suitable seal to prevent water drops for my project. The goal is to improve speed without water leakage or friction. Requirements: Design the cylinder and piston head gap based on specific measurements provided. Design a suitable seal to allow for faster movement without water leakage or friction. The cylinder and piston head can be made of either steel or aluminum. Ideal Skills and Experience: Experience in mechanical engineering and design Knowledge of engine efficiency and power output Ability to work with specific measurements and requirements Familiarity with materials such as steel and aluminum Experience in gravity, friction, ...

    $8 / hr (Avg Bid)
    $8 / hr Snittbud
    18 bud
    Project for Ilya T. Avslutades left

    ...profile and would like to offer you my project. We can discuss any details over chat. he end user should have a possibility to turn on WIFI module, choose the proper visible WiFi router and enter the password. Arduino board (any of your preferred) receives float data from a certain google spreadsheet and moves the 6V actuator up to the volume. There are 10 actuators. There are 10 readable cells in google spreadsheet. Stage 1: All the actuators are at 50% of their forward position. Stage 2: Arduino board checks the cells values in google spreadsheet. When the 1st cell value is 50, the actuator piston remains in the same position. When the 1st cell value is 51, the actuator piston moves out for 1 mm. When the 1st cell value is 49, the actuator piston moves ...

    $250 (Avg Bid)
    $250 Snittbud
    1 bud

    Hello, I am looking for an artist to create a piece of artwork for me. Specifically, this project is for the creation of a “Car Piston Guy” art piece using a cartoonish style. I am looking for something roughly 8x10 inches or smaller. I have specific examples of what I'm looking for in terms of the piston, but I am open to the artist's interpretation beyond that. If you have a background or interest in car pistons, I would love to see what creative ideas you could come up with! Like the overall feel of this piston guy, but feel free to rework it. Would like to add the corvette logo and the mopar logo if possible.

    $60 (Avg Bid)
    $60 Snittbud
    38 bud

    I am in need of a Cinema 4D Xpresso expert who can help me with an animation project. Specific animation effect: - I am looking to achieve the rotation of the piston of a rotary engine with the help of xpresso in Cinema 4D. The model comes from me. Just the objects needs to set in xpresso and needs to be animated ready to use and editable with a slider or els to set the speed of rotation. Storyboard or concept art: - example gif for rotation attached / screenshot of available model attached Description of screenshot of available model: Blue and White object are static, orange is rotating around the blue cogwheel inside the white housing, yellow axis will be driven by the orange piston... attached animated gif should help to understand the principle of the rotary e...

    $131 (Avg Bid)
    $131 Snittbud
    18 bud
    Miniature pump design Avslutades left

    I am looking to have a miniature piston pump designed for a water gun, and I'm seeking help with specifications, technical drawing, 3D models and components. Attached photo for clarification. The piston and both check valves should be spring powered. The pump should be able to move 30-50 ml of liquid. Selected components should be available off the shelf and in case they are not, the custom components should be developed according to ''design for manufacturing'' guidelines (low cost).

    $140 (Avg Bid)
    $140 Snittbud
    46 bud
    flight instructor Avslutades left

    I'm looking for an experienced and professional flight instructor who can provide advanced level instruction on a piston aircraft for a medium-term duration of 3-4 weeks. The instructor should have extensive experience and knowledge in flight operations, as well as certifications and licenses in the applicable aircraft category required for providing the training. The instructor should also be able to tailor the course to a student's individual needs. The instructor should be patient and have excellent communication skills, as well as be prepared to make adjustments during the training sessions based on student feedback. A comprehensive and engaging course syllabus should be provided in advance, outlining topics and materials to be covered over the course of the 3-4 weeks...

    $37 / hr (Avg Bid)
    $37 / hr Snittbud
    1 bud
    X-plane Panel Designer Avslutades left

    I am looking for a skilled X-plane Panel Designer to create an exact replica of a single-engine piston aircraft panel. The project requires the following: - Expertise in X-plane Panel design - Ability to create an exact replica of a single-engine piston aircraft panel - Proficiency in incorporating specific instruments and avionics as per the list provided by the client - Attention to detail and accuracy in creating a highly realistic panel - Experience in working with X-plane flight simulators If you have the necessary skills and experience, please submit your proposal with relevant portfolio samples.

    $293 (Avg Bid)
    $293 Snittbud
    37 bud

    ...mechanical workshop, I want to make clear that the name is register already and the meaning behind is Medina Automotive, Mr. Medina is an Mechanical Engineer, who has a long experience in the motor industry who wants to offer to the community his expertise to repair any mechanical or technical issue why their cars, diesel, petrol, hybrid or electric. You must understand that cars today are not just piston, petrol and gears, has been incorporated a lot of technology that makes the boundary between and old school mechanic and the expert more prepare. We have seing a lot companies with logo displaying gears, cars and spanners, I will say the old fashion industry, the new automotive era have started already and is electric, hybrid and also hydrogen cars...but we can't stop serv...

    $36 (Avg Bid)
    Garanterad
    $36
    857 bidrag

    Seeking a skilled freelancer proficient in simulating car brake systems. Need a 3D CAD simulation (like fig.1) that replicates brake squeal, demonstrating friction pad vibrations during low-speed braking. Also requires a graph displaying vibration frequency for future comparison when integrating an actuator. In the second part of the simulation, the actuator inserted in a brake caliper piston should operate at a high frequency (10-20 kHz) to stabilize the disk-pad system, eliminating vibration-induced noise. Actuator Specifications: 800V voltage supply, mA-level current (flexible). Final graph (e.g. fig.3) required, comparing frequencies with and without the actuator to demonstrate stability.

    $22 (Avg Bid)
    $22 Snittbud
    15 bud

    I need to tutor me to do it. I would like to start the tutorial with a system with two pistons and two fluids with FSI and coupling analysis in transient structural and fluent. that...pistons and two fluids with FSI and coupling analysis in transient structural and fluent. that the an image from the geometry I am working on (gemetry 1 .png) I would like to do a fsi Analysis with fluent and structural and get forces, accelerations, velocities, energy per cycle pressure drop and volumetric flow in the circuit and its variation I would like to calculate the kinetic energy of the piston at the end of it's stoke and at each moment of the cycle .. I know how to do like the analysis till the dynamic mesh I can do the coupling. but I'd like to do it with someone have expertise...

    $12 / hr (Avg Bid)
    $12 / hr Snittbud
    9 bud

    I am in need of an elegant logo for my engineering workshop ‘ESI Engineering’. I would like the logo to include an image or object in it, some mechanical like gears or piston etc., preferably in the form of a graphic, and incorporate black, gold, and other muted tones. Abstract, elegant, and minimalist styles are preferred. I'm very excited to see the results of everyone's ideas, creativity, and efforts!

    $50 (Avg Bid)
    $50 Snittbud
    98 bud
    Project for Wajiha A. Avslutades left

    ...someone who can help create a 3-part patch logo for an mc-club. It is important that the design could be used both on web and as a patch on vests. Not sure if this has any requirements for how the design is done, but I will leave that to you professionals :). Some ideas have been attached to show you what the club is looking for. The colors are important, they will be silver on black bacground. The design should follow the idea in the image called concept. A more detailed example can be found in the image complete concept example. The two remaining images are meant as ideas for the center image/logo in the means of "smoking bird with long beak, sitting on top of a skull" and "wacky skull with helmet with a piston sticking out of its mouth"...

    $250 (Avg Bid)
    $250 Snittbud
    1 bud

    Task: Design product in Solidworks based on the provided link. Models and detail drawings with BOM required. Show hardware Data provided: See link of product to model. Material to be used: Use only standard material available at store only. Additional links provided https://www.amazon.com/Pack-Gas-Spring-Pressure-Hydraulic/dp/B07RTMBC1S/ref=sr_1_4?crid=1F2NBGYXQJY0Y&keywords=cabinet+piston+outdoors&qid=1680036046&refinements=p_72%3A1248909011&rnid=1248907011&s=hi&sprefix=cabinet+piston+outdoors%2Caps%2C112&sr=1-4

    $166 (Avg Bid)
    $166 Snittbud
    66 bud

    I need a program where i can generate a monthly schedule for doctors to work each day. Global rules: 1. each day will need 6 doctors, for 6 positions: Toran1, Toran2, Toran3, Toran4, Conan1, Conan2 2. doctors who works in position Toran2,toran3,toran4 cant be working next day 3. doctors who work on position toran1 can still be next day on piston conan1,conan2 4. same doctor cant be on 2 positions on same day. 5. doctors will be 4 groups ( same doctor can be more than 1 group ) 6. toran1 only from group 1, toran 2,3 --> only from group 2 , Toran4 only from group3, Conan1 and 2 only from group 4. individual rules: 1. each doctor will have individual rules ( days he cant be, days he want to be , maximum days per month in a certain position ) . the Ui is not that important a...

    $186 (Avg Bid)
    $186 Snittbud
    38 bud

    I have an image of pistol i need pistol template engraving in adobe illustrator 1: i need each part of pistol separat so i can use in fiber laser machine 2: the pattern on piston i need much simillar 3 end result like this other sample image name of the pistol is colt 1911 light weight commander .45

    $35 (Avg Bid)
    $35 Snittbud
    11 bud

    ...players can even create their own custom recipes. Exploration: Minecraft has a vast world to explore, with different biomes, structures, and secrets to discover. Players can travel by foot, horse, boat, or even minecart to explore the world around them. Redstone: Minecraft's version of electricity, redstone allows players to create complex contraptions and machines, including automated farms, piston doors, and more. Mods and custom content: Minecraft has a large and active modding community, with players creating their own custom content, such as new biomes, mobs, and game modes. Adventure mode: Adventure mode is a custom game mode that allows map makers to create their own stories, quests, and challenges for players to complete. Combat: Minecraft features a variety of ...

    $30 / hr (Avg Bid)
    $30 / hr Snittbud
    24 bud

    ...someone who can help create a 3-part patch logo for an mc-club. It is important that the design could be used both on web and as a patch on vests. Not sure if this has any requirements for how the design is done, but I will leave that to you professionals :). Some ideas have been attached to show you what the club is looking for. The colors are important, they will be silver on black bacground. The design should follow the idea in the image called concept. A more detailed example can be found in the image complete concept example. The two remaining images are meant as ideas for the center image/logo in the means of "smoking bird with long beak, sitting on top of a skull" and "wacky skull with helmet with a piston sticking out of its mouth"...

    $85 (Avg Bid)
    $85 Snittbud
    120 bud

    Determine the formula that gives the piston position relative to the shaft and barrel axis angles. This is equivalent to the piston position relative to crank angle in this Wikipedia page: but instead of a crankshaft engine it is for a variable displacement radial axis piston pump. (this animation does not have a variable displacement but gives an idea of the functionality)

    $9 / hr (Avg Bid)
    $9 / hr Snittbud
    3 bud

    What I have: - I have a 50 ton shop press with a 7 inch piston travel. - I have a stick welder -I have a plasma cutter and table -I have a 20 inch drill press -Torch and forge to heat material to white hot The job will be broken up into two parts, design and if feasible, build the jigs needed. Task- To design two jigs to achieve the goal utilizing some/all equipment I have listed. I have other equipment so ask if you need something not on the list, I may have it, and just forgotten to list it. The first task is to design something to bend an ordinary piece of strapping as indicated in diagram A It appears rather simple but so far I have distorted the 16mm hole. I have given thought to drilling the 16mm hole after bending the strapping but it defeats the spee...

    $319 (Avg Bid)
    $319 Snittbud
    31 bud

    I need mechanical drawings of free piston sterling engine which can produce 0.5kw power.

    $17 (Avg Bid)
    $17 Snittbud
    17 bud
    Builders logo Avslutades left

    My best verbal description is a “drooling aggressive looking lemon” ? biting and bending a cam and or piston. Oil type drool with seeds coming from the mouth. (Lemon Built) in an aggressive font, in small font “By Royal JZ”

    $71 (Avg Bid)
    $71 Snittbud
    36 bud
    Builders logo -- 2 Avslutades left

    My best verbal description is a “drooling aggressive looking lemon” ? biting and bending a cam and or piston. Oil type drool with seeds coming from the mouth. (Lemon Built) in an aggressive font, in small font “By Royal JZ”

    $83 (Avg Bid)
    $83 Snittbud
    25 bud
    Piston Volumetric Pump Avslutades left

    It’s a small project which has to be made on Autodesk Inventor.

    $24 (Avg Bid)
    $24 Snittbud
    10 bud

    I need two images that show a internal combustion engine. They both have the basic components, the cylinder, piston, connecting rod, crank, and crankshaft. The first image shows everything intact and the second image shows the rod disconnected and a hole in the crankshaft.

    $117 (Avg Bid)
    $117 Snittbud
    34 bud
    Trophy icon New business Avslutades left

    Automotive businesses. Wanting a new logo with the same picture but better then what it is. Better details , color,font, and etc. Be creative and have fun. Try to keep the green and black. But if u dont want to thats fine. Thank you for everything yall do. Want to keep the piston and the Skull in it.

    $10 (Avg Bid)
    $10
    45 bidrag
    Need 3d designer -- 2 Avslutades left

    Need to create 3d and 2d drawings for small parts like springs washers drivers and piston etc for one of our valve designs

    $70 (Avg Bid)
    $70 Snittbud
    25 bud
    Need 3d designer Avslutades left

    Need to create 3d and 2d drawings for small parts like springs washers drivers and piston etc for one of our valve designs

    $73 (Avg Bid)
    $73 Snittbud
    26 bud
    Trophy icon Design a logo for a Aviation company. Avslutades left

    Hi! Im looking for someone to design a rather simple but eye-catching logo for my aviation maintenance company. The name is 'TM Aero' and should be quite simple. Dont be afraid to use colors. I've added some ideas just as an example, but feel free to try something different. The main focus of the business is small piston engine aircraft, so small airplanes are preffered.

    $50 (Avg Bid)
    Garanterad
    $50
    555 bidrag

    I will give you the new PISTON BROKE design, I also hand over the alphabet font file also! Thank you, Sir, You are the best!

    $20 (Avg Bid)
    $20 Snittbud
    1 bud

    "PISTON BROKE" Design a professional but clean logo that can be used as the name/logo for our "Online Store" ...Selling Merchandise...Mancave items... Auto parts...Muscle Cars etc (Website is Gasoline Cartel...everything Automotive muscle cars etc)...Logo will also be used on our merchandising. "PISTON BROKE" is the name to be used in the Logo...it needs to feature a Cracked or broken Car Piston in the logo with a devilish /Cheeky / Evil or Cool twist... (It is a play on the words Pissed-N-Broke)...Can be slightly devilish or cool but not silly comedy / cartoonish please...It wont suit the theme of our Website which is Evil skull and Crossbones.

    $54 (Avg Bid)
    Garanterad
    $54
    227 bidrag
    we need an animation Avslutades left

    We need an animation for a project in which we need you to show the movement of flow of water and steam , movement of piston and solar panel using MAYA, SOLIDEDGE. EXPLANATION: We need to concentrate the sun rays on the boiler using parabolic dish which will convert water into steam and this steam will rotate the propeller which will be directly connected to the piston. This in turn would move the shaft leading to the movement of Solar panel.

    $91 (Avg Bid)
    $91 Snittbud
    14 bud
    Trophy icon Design a new logo Avslutades left

    Professional Logo to be used as a brand for merchandise etc... Business Name: GASOLINE CARTEL... Automotive website...Exclusive car club...Themed adults only 18+...Would like to feature a Cool but Evil cartel type skull in logo with maybe something automotive...IE; Piston crossbones???...IDEAS: Mexican Cartel/Tequila/ Old School Garage/Muscle Car...

    $69 (Avg Bid)
    Garanterad
    $69
    504 bidrag

    Es un logo para una empresa de mantenimiento industrial. Aqui se le dara manteiiento a generadores electrios, equipo pesado y equipobagrondustrial. La meta es que el diseño de la foto adjunta se vea profesional. Los elementos que tiene son 3: Una rueda dentada que simula ser una letra "D". Un piston que simula ser una comilla. Una oruga para contener los servicios a ofrecer.

    $27 (Avg Bid)
    $27 Snittbud
    56 bud

    Es un logo para una empresa de mantenimiento industrial. Aqui se le dara manteiiento a generadores electrios, equipo pesado y equipobagrondustrial. La meta es que el diseño de la foto adjunta se vea profesional. Los elementos que tiene son 3: Una rueda dentada que simula ser una letra "D". Un piston que simula ser una comilla. Una oruga para contener los servicios a ofrecer.

    $10 - $30
    $10 - $30
    0 bud

    Looking to design a solid and fully functional rendering and design of W24 SUPER HEAVY-DUTY ENGINE and 13 SPEEDS EXTREME HEAVY-DUTY TRANSMISSION that works and synchronize with each other outstandingly. The below subjects will be use during family discussion and gathering at bonfire. W24 SUPER HEAVY-DUTY ENGINE I want to Design a W24 ENGINE in the below describe specifications which in a later time I can fully upgrade, modify if I so chose to bring it to reality. The Engine must meet the below specifications further must be able to use as a 2,675-KILOWATT EXTREME HEAVY-DUTY electric generator engine whenever such should be needed. EXPECTED DIMENSIONS ____________________________________________________________ ENGINE LENGTH UNDRESSED: 3.18898 Foot (972 millimeters)...

    $1077 (Avg Bid)
    $1077 Snittbud
    16 bud

    I attached the reference image of piston and cylinder setup(Engine). Please take a look. You have to code for 3 parts that are piston, connecting rod, and crank. Please send some of your sample work using cadquery. I will instruct where to start.

    $10 (Avg Bid)
    $10 Snittbud
    5 bud
    Make me a logo Avslutades left

    want to start a clothing company called "Pistol & Piston" I need a logo, probably a pistol and an engine piston crossed like crossbones with some cool text

    $50 (Avg Bid)
    $50 Snittbud
    134 bud

    Piston Coring, Gravity Coring, Sampling, Vibrocoring, Seabed CPT systems, Box Coring, Offshore lab work, offshore manager, party chief, company representative

    $121 / hr (Avg Bid)
    $121 / hr Snittbud
    7 bud