Pic18 bootloader c18Jobb

Filter

Mina senaste sökningar
Filtrera:
Budget
till
till
till
Typ
Kompetens
Språk
    Jobbstat
    966 pic18 bootloader c18 jobb har hittats, med prissättning USD

    ...with unlocked bootloader onto which you can install the latest crDroid 10.2+ - compatibility see , or an unofficial 10.2+ build, to see if you can reproduce this issue. The task here is to identify the anomaly and fix the issue so even the latest crDroid custom ROM for my Nokia 6.1 can again communicate and function seamlessly via adb with my Intel Mac running macOS Monterey 12.7.4. In-depth knowledge in the anatomy of Android and adb are required towards fixing this issue. I͟n͟ ͟y͟o͟u͟r͟ ͟i͟n͟i͟t͟i͟a͟l͟ ͟r͟e͟p͟l͟y͟ ͟t͟o͟ ͟m͟e͟,͟ ͟f͟i͟r͟s͟t͟ ͟a͟n͟d͟ ͟a͟b͟o͟v͟e͟ ͟a͟l͟l͟ ͟i͟n͟c͟l͟u͟d͟e͟ ͟t͟h͟e͟ ͟f͟o͟l͟l͟o͟w͟i͟n͟g͟ ͟i͟n͟f͟o͟r͟m͟a͟t͟i͟o͟n͟:͟ 1. Which Android phone do you have (Model + exact model identifier)? 2. Have you unlocked your phone's bootloader so you can inst...

    $87 (Avg Bid)
    $87 Snittbud
    21 bud

    I need a bootloader for the STM32H750B-DK development board. The bootloader must be written with STM32CubeIDE and must contain the .IOC file When the board is turned on, if there is a valid application in the board's QSPI memory (dual bank), it starts it If there is no valid application or if the "user" key is pressed, the bootloader must allow the loading of a new firmware (.xip file) from the PC to the QSPI memory (dual bank) via USB CDC Once the file has been uploaded, you must launch the application It is sufficient that we establish a serial communication protocol, I will take care of creating the PC software for choosing and sending the .xip file to be sent to the board.

    $211 (Avg Bid)
    $211 Snittbud
    14 bud

    I'm currently struggling with a boot issue on Linux Mint 21.3 Cinnamon. I've been trying to repair it using a live USB and have run both boot-repair and gparted. However, I can't access the GRUB bootloader since my SSD only boots to UEFI. See the screenshot of the live usb running gparted. I think I need to reformat the unallocated disk bot maybe? The exact issue I'm dealing with is that the system only boots to UEFI. As such, the ideal freelancer should be able to: - Understand and have experience navigating UEFI systems - Have expertise in repairing bootloader issues - Have experience with Linux Mint 21.3 Cinnamon and recovery methods Any available assistance would be greatly appreciated to help rectify this and get my system booting properly again. ...

    $24 (Avg Bid)
    $24 Snittbud
    4 bud

    I am looking for a freelancer to help me find a junk yard or salvage yard in the Midwest that has a lar...Preferred Location: - Midwest, Chicago. - If there is a popular junk/salvage yard that is located in anywhere in the US that would be great also. Model and Condition Preference: - Specific model but no condition preference - I am looking for large quantities of used or broken diesel engines around 14 to 16 engines caterpillar for mostly industrial engines 3406Cat 3408 cat 3412Cat C11 C13 C15 C18 C32 Intended Use: - Resale Ideal Skills and Experience: - Experience in the salvage yard industry - Knowledge of Caterpillar diesel engines and their models - Strong research and networking skills to locate the desired junk yard - Ability to negotiate and secure a good deal for t...

    $140 (Avg Bid)
    $140 Snittbud
    7 bud

    I am looking for a freelancer to help me find a junk yard or salvage yard in the Midwest that has a lar...Preferred Location: - Midwest, Chicago. - If there is a popular junk/salvage yard that is located in anywhere in the US that would be great also. Model and Condition Preference: - Specific model but no condition preference - I am looking for large quantities of used or broken diesel engines around 14 to 16 engines caterpillar for mostly industrial engines 3406Cat 3408 cat 3412Cat C11 C13 C15 C18 C32 Intended Use: - Resale Ideal Skills and Experience: - Experience in the salvage yard industry - Knowledge of Caterpillar diesel engines and their models - Strong research and networking skills to locate the desired junk yard - Ability to negotiate and secure a good deal for t...

    $25 (Avg Bid)
    $25 Snittbud
    6 bud
    pic programming Avslutades left

    I am looking for a skilled programmer to create a new code for PIC18 programming. The desired functionality of the program should focus on timers. I am using a PIC18F24K22-I/SO controller that needs a program consisting of an operational timer. I will be using two in cascade in the final system. Requirements: - Experience in PIC18 programming and has the right development tools. - Strong understanding of timers and their implementation - Ability to create a new code from scratch - Attention to detail and ability to follow specifications Skills and Experience: - Proficiency in PIC18 programming - Previous experience with timer-based programming - Familiarity with data management and control systems would be beneficial If you have the necessary skills and experience, ...

    $691 (Avg Bid)
    Framhäv
    $691 Snittbud
    21 bud

    Hello I have a project need to have a bootloader to do a firmware upgrade via UART0, can use mcuboot to do it

    $121 (Avg Bid)
    $121 Snittbud
    18 bud

    Project Description: I am looking for a skilled developer who can help me with locking the bootloader of my OnePlus Nord 3 device while preserving root access. Here are the project requirements: Code : Device Information: - Brand and model: OnePlus Nord 3 Data/Settings Preservation: - I do not need to preserve any specific data or settings on my device. Current Device State: - The device is not rooted but the bootloader is unlocked. Skills and Experience Required: - Strong knowledge and experience in Android device customization and rooting. - Proficiency in bootloader locking and preserving root access. - Familiarity with OnePlus devices and their specific requirements. - Ability to work with the OnePlus Nord 3 model specifically. Please note

    $351 (Avg Bid)
    $351 Snittbud
    11 bud

    I am looking for a freelancer who can help me find used/broken diesel engines suppliers in Europe, preferably in the Netherlands and Sweden. So regarding the engines that I am looking for are: 3406Cat 3408 cat 3412Cat C11 C13 C15 C18 C32 I am looking for at least 15 diesel engines in one country in Europe, preferably in Netherlands or Sweden. The engines does not matter if it broken or used as long as it meets with the targeted price which is maximum $6000. A Salvage Yards would be great that has multiple of diesel engines. Budget: Less than $6000 Specific Models: I am only interested in specific models of diesel engines. Shipping and Transportation: I am able to handle shipping and transportation myself. Ideal Skills and Experience: - Strong research skills to locate used/bro...

    $10 - $30
    Framhäv Brådskande Försegla
    $10 - $30
    7 bud

    I am looking for a freelancer who can help me find used/broken diesel engines suppliers in Europe, preferably in the Netherlands and Sweden. So regarding the engines that I am looking for are: 3406Cat 3408 cat 3412Cat C11 C13 C15 C18 C32 Scania 43 Perkins engine Mitsubishi engine Hino Budget: Less than $7000 Specific Models: I am only interested in specific models of diesel engines. Shipping and Transportation: I am able to handle shipping and transportation myself. Ideal Skills and Experience: - Strong research skills to locate used/broken diesel engines in the Netherlands and Sweden. - Knowledge of diesel engines and their specific models. - Good communication skills to negotiate and arrange the purchase of the engines. - Attention to detail to ensure the engines meet the re...

    $21 (Avg Bid)
    $21 Snittbud
    19 bud

    I am looking for a skilled developer with experience in Yocto to modify and compile at91bootstrap and...developer with experience in Yocto to modify and compile at91bootstrap and u-boot bootloaders and kernel source. The specific modifications needed include: - Change RGB LED settings in order to modify the color boot sequence - Adding custom drivers - Implementing security patches The ideal candidate should have: - Strong knowledge and experience with Yocto - Proficiency in modifying and compiling bootloader and kernel source code - Familiarity with adding custom drivers and implementing security patches The project has a preferred timeline of completing within 1 week. However, if you have a flexible schedule and can meet the requirements within a different timeframe, please le...

    $194 (Avg Bid)
    Brådskande
    $194 Snittbud
    5 bud

    I am based in the United States and I am in need of a used diesel engine that costs not more than $4000. I am looking for engines such as Cat 3406, 3408, 3412, C11, C13, C15, C18, C32, Scania 43, Perkins engine, Mitsubishi engine and Hino. The condition of the engine is not particularly important, so need not necessarily be in good working order. I am open to any recommended suppliers, though I do not have a specific source or supplier in mind. The engines should be in one place.

    $112 (Avg Bid)
    $112 Snittbud
    7 bud
    nrf9160 bootloader Avslutades left

    I have a project for Nordic nrf9160 MCU, I need UART base firmware upgrade bootloader code. It must UART0 ( the default port for AT command) and no MCUboot used Finally you need to provide the source code and UART communication protocol

    $148 (Avg Bid)
    $148 Snittbud
    20 bud
    Embedded C, C++ Avslutades left

    Im looking for someone who can support me in coding. He/She must have string Embedded knowledge with C and C++ skills , Microcontroller knowledge, driver development, ADC knowledge, freeRTOS, data modeling, framework, bootloader exp.

    $1312 (Avg Bid)
    $1312 Snittbud
    19 bud

    Project Overview: We are seeking an experienced custom ROM developer to design a secure and feature-rich ROM for Google Pixel 5 & Samsung A20. The custom ROM should emphasize user privacy, security, and enhanced device controls. Key Features: Encrypted Local Storage: All data stored locally on the device should be encrypted. Lock Bootloader: Ensure the bootloader is locked to prevent unauthorized tampering. Remove Recovery System / Safe Mode: Eliminate options to access recovery mode or safe mode. Lock Firmware with Secure Keys: Ensure firmware can only be updated with secure keys. Isolated App Environment: Applications should run in isolated environments, ensuring inter-app security. Integrated VPN: A built-in VPN feature for secure browsing and data transmission. Brut...

    $750 - $1500
    Försegla Sekretessavtal
    $750 - $1500
    2 bud

    hello ... i was given a locked pixel7 .... its alreadyn been attempted to factory reset .... i have no access to the phone to enable developer options and oem unlocking ... i simply wish to use the phone .... i plan to flash graphene os over it ...... so either unlock the bootloader .... or flash ota or factory image over the top of the android rom

    $80 (Avg Bid)
    $80 Snittbud
    16 bud

    I am in need of a bootloader for my STM32F405 which would allow for firmware updates over the air, as well as enable communication with a GSM module. I prefer to use a SIM7600 module. The bootloader doesn't need to have any specific features or functionalities--any standard features will suffice.

    $367 (Avg Bid)
    $367 Snittbud
    7 bud

    I'm looking for a freelance programmer / Software Engineer to prepare a Step by S...determined people - i.e. fuses and other security features on the ATSAMD51 will need to be employed. I do not want people to extract the program or code and then be able to upload it onto copied devices. I do not require write protect, only read protect. I have ATMEL Studio (on a PC) and a Segger J-Link Mini. I am happy to purchase additional software or equipment as needed. In the past, I put a Bootloader on the chip with ATMEL Studio and the J-Link; but, then used the Arduino IDE to upload the programmer via a USB. I would like the process to be on a word doc, be very clear, step by step and preferably have photos as part of the explanations. The successful applicant may have lots of fol...

    $284 (Avg Bid)
    $284 Snittbud
    16 bud

    I am looking for a freelancer who can assist me with the u-boot-tools and uploading the Openstage 20E SIP Firmware. I require help with both tasks. Specifically, I have a specific version of the firmware that I want to upload, so I will provide the necessary files for this. I want to ensure that I have all the necessary hardware and cables to connect the device for uploading the firmware, and I can confirm that I have already obtained them. Ideal skills and experience for this job include: - Proficiency in u-boot-tools and firmware uploading - Knowledge of Openstage 20E SIP Firmware - Familiarity with hardware and cable connections for firmware uploading If you have the necessary expertise and experience in these areas, please bid on this project.

    $10 - $30
    $10 - $30
    0 bud

    I am looking for a freelancer who can help me with unlocking my Google Pixel 7 or flashing it back to factory settings. The bootloader for my device is currently locked. Skills and Experience: - Experience with unlocking bootloaders and flashing devices - Knowledge of Google Pixel devices and their specific requirements - Familiarity with the process of unlocking bootloaders and flashing devices back to factory settings Please note that I only require one of these actions to be performed on my Google Pixel 7.

    $17 (Avg Bid)
    $17 Snittbud
    2 bud

    I'm looking for an experienced freelancer to add FIPS to my bootloader. I am currently using GRUB for my bootloader, and I need to install additional components for the FIPS installation. The type of FIPS that I need is FIPS 140-2. This project requires in-depth knowledge and experience with FIPS compliance. If you think you can do the job, I'd be glad to hear from you.

    $397 (Avg Bid)
    $397 Snittbud
    9 bud

    Project Title: Bootloader For Renesas RL78 mcu Description: I am looking for a skilled developer to create a bootloader for the Renesas RL78 mcu. The ideal candidate should have experience with Renesas RL78 mcu and be familiar with the development environment. bootloader code is ready need help for run application code through it Specific Features: - UART communication: The bootloader should support UART communication for firmware updates and debugging purposes. MCU's Flash Memory: - The flash memory size of the MCU is 256KB. Hardware Platform Support: - The bootloader should be compatible with the On Chip Debugger Interface for seamless integration with the existing hardware platform. If you have experience in developing bootloaders and are fa...

    $9 / hr (Avg Bid)
    $9 / hr Snittbud
    4 bud

    ...of an experienced Android developer who has knowledge and experience with unlocking the bootloader on a Mediatek chip Android device. Requirements: - Must have experience working with Mediatek chip Android devices - Knowledge and understanding of the bootloader unlocking process - Familiarity with the specific make and model of the Android device - Ability to troubleshoot and resolve any issues that may arise during the bootloader unlocking process Responsibilities: - Unlock the bootloader on the specified Mediatek chip Android device - Provide detailed instructions and guidance on the process for future reference - Ensure that the device remains fully functional and operational after the bootloader is unlocked Skills and Experience: - Strong under...

    $182 (Avg Bid)
    $182 Snittbud
    23 bud

    I need someone who have experience in avoiding root detection on android. There is android app that can detect almost all roots that i have already tested (Magisk, Magisk delta, shamiko, safetynet fix), when i open it, it is closing immediately with message that its detects magisk / unlocked bootloader. I test it on various of Google Pixel smartphones (from GP 1 to 5, from android 8 to android 12) So, the main goal is to have root and make possible to successful run the app.

    $150 (Avg Bid)
    $150 Snittbud
    28 bud

    I am looking for an experienced embedded Linux developer to help me with my project. The target hardware platform is the Raspberry Pi, and I need a custom bootloader with features for network booting, encryption support, as well as an IP discovery tool. The project must be completed within 3 months. I need a talented developer who can leverage the Yocto project to create the custom bootloader and get it up and running. The bootloader should be tailored to the specific needs of my project. Furthermore, I would like support for debugging capabilities should any issues arise during the development cycle. I'm looking for a reliable and experienced developer who can work within my specified timeframe and deliver an exceptional product. If you think you have the ...

    $8935 (Avg Bid)
    $8935 Snittbud
    17 bud

    ...1011 Portage road who was owned by Sir William Mackenzie should not be a heritage designation. I got a letter saying intention to designate Property under the ontario heritage Act Letter from Emily Turner Taken notice that the council of the city of kawartha lakes, on may 23, 2023 passed a resolution of intent to designate the following property under section 29 of the ontario heritage act, RSO c18, as a property of cultural heritage value or interest. 1011 Portage Road, Geographic Township of eldon Statement of reasons for designation Design and Physical value 1011 Portage road has design and physical value as a representative example of a late nineteenth century estate in Kawartha Lakes. Developed for railway builder and Kirkfield native Sir William Mackenzie and his family...

    $54 (Avg Bid)
    $54 Snittbud
    6 bud

    ... Responsibilities: Design and develop a secure and efficient bootloader for the STM32L151CCT6 microcontroller, which will reside in a separate partition in the flash memory. Create three separate sections within the device's flash memory: one for the bootloader, one for the currently running application firmware, and one for incoming firmware updates. Implement a mechanism in the bootloader to verify the integrity of the new firmware before applying the update, such as a checksum or CRC. Develop an OTA update mechanism that can receive and store incoming firmware updates (received via MQTT from AWS IoT Core) in the dedicated update partition of the flash memory, without disturbing the current firmware. Ensure the bootloader applies the new firmware ...

    $394 (Avg Bid)
    $394 Snittbud
    14 bud

    Starting from latitude and longitude through a GET from url: for example I have to recover the B13 value present in <Data name="CODZONA"> from file <displayName>Zone Code</displayName> <value>B13</value>. Another example: starting from I have to recover the C18 value present in <Data name="CODZONA"> from file <displayName>Zone Code</displayName> <value>C18</value>.The data must be fetched via a script via a fetch(''). Attached the

    $36 (Avg Bid)
    $36 Snittbud
    9 bud

    I am in need of assistance with bootloading my ATmega256 Arduino through the ICSP port. I have a specific bootloader in mind and require guidance in implementing it. I prefer to use a programming language other than C++ or Python. Additionally, the ATmega256 will be integrated into a device that falls under the "Other" category. Ideal skills and experience for this project include: - Extensive knowledge and experience with ATmega256 Arduino bootloading - Proficiency in a variety of programming languages - Experience integrating ATmega256 into devices beyond robotics or home automation

    $10 (Avg Bid)
    $10 Snittbud
    1 bud

    I tried a couple of days and I could not unlock the bootloader According to my researches, this version is made for Korean and unlock the bootloader is not possible: So I need your help with the validated steps to unlock the bootloader of this smartphone I'm using linux, I'm experienced with ADB, fastboot, TWRP, root, etc. In the past I flashed several androids, but this model is a challenge. The test, should be a video call using google meet in which you should guide my step by step to unlock the bootloader. I achieved only upgrade from android 6 to android 7

    $35 (Avg Bid)
    $35 Snittbud
    2 bud

    It needs network, control of DSP chips via I2C, presets, and UART and bootloader and firmware update process. We have the code for Freescale chip in C, and it works perfectly but code needs to be moved to STM. Please apply if you are experienced and confident.

    $1129 (Avg Bid)
    $1129 Snittbud
    33 bud

    I am looking for a Freelancer to help me set up an STM32 Arduino development environment. The processor architecture I am using is STM32. I'm not sure if I need a custom bootloader but I'm open to exploring the possibility. I want to set up either a Makefile or PlatformIO environment for this project. The person I hire should have experience working with both STM32 processors and the Arduino IDE. I'm looking for a reliable person to get this job done quickly and with quality.

    $56 / hr (Avg Bid)
    Framhäv
    $56 / hr Snittbud
    8 bud

    we have a magnetic strip reader. all the files and code is available in GITHUB. need to build the hex file and upload those in ATMEGA168 MCU github: need to be done ASAP. Write "I can do" on top of the BID. thanks

    $506 (Avg Bid)
    $506 Snittbud
    15 bud

    Searching for an embedded developer who will create a code for Zephyr RTOS which will do a firmware update over the bluetooth. On target device is Nordic Secure DFU client (Secure Bootloader) with BLE transport and we need the master which will run on another micro controller with Zephyr RTOS. The code should use standard Zephyr RTOS Bluetooth API. Image file will be stored on SD Card with FAT file system, but the code itself doesn't have to include communication with SD Card / FAT. Nordic Secure DFU protocol is described here: Here is the Android DFU Library in case it helps (the code we are looking for should have similar functionality as this library, but has to run on MCU with Zephyr

    $50 / hr (Avg Bid)
    $50 / hr Snittbud
    5 bud

    Hello guys, I am trying to set up the UART bootloader on PIC32CM MC00 Nano Curiosity Board, via Harmony v3 MCC and MPLAB X 6.00. I need someone with experience in it to help me do it step by step, for the specific controller, and PC32 generally. Thanks

    $117 (Avg Bid)
    $117 Snittbud
    20 bud
    scrambled bootloader Avslutades left

    Hi, your email Flaplaud at does no longer work, I had a proposition for you.

    $50 (Avg Bid)
    $50 Snittbud
    1 bud

    need customized rom/firmware to android - Huawei Mediapad M3 Lite 10The bootloader will be unlocked specification. - When you connect the device - Huawei Mediapad M3 Lite 10 - to power it has to boot up(start up) automatically. - When you unplug power it has to show it shut down within 60 sec, and count down and then close the device. - When it starts up, it has to show a customized picture/animation. - When it is started up I have to run one specific app. - It should not show any comand-line on the screen and run the app in full screen mode. - The volume should be set to 100% always - If the app crash it has to start up the app again. -The app have built in so it use wi-fi and you can setup wi-fi network from the app - The app uses the front camera and store image on the...

    $1489 (Avg Bid)
    $1489 Snittbud
    27 bud

    Tricore Boot BSL and GPT Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and...Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and read passwords, and information in the unlocked state of the processor, Password lock Opening Calculation Special Bootloader and Source Codes. I want people who have experience in this subject ...

    $1138 (Avg Bid)
    $1138 Snittbud
    24 bud

    ...computer (SBC) ie. Raspberry Pi, a chargeable large capacity battery, buttons and touch screen. Expertise regarding the operating system (bootloader in particular), utilized by our chosen SBC for the project/s, would also be highly valued. As well as having personal hands-on experience with designing and creating similar projects. Please answer to this question (since we do not read offers that are created by automatic bots, so we ask something that has nothing to do with the business to see if the text is read by a human): is horse bigger than computer. currently the most critical things we need help with: • Raspberry pi & Libre Computer "Le Potato" bootloader adjustment to make it boot into company logo and retain logo until application lau...

    $16 / hr (Avg Bid)
    $16 / hr Snittbud
    26 bud

    We need someone capable of unlocking MI 11T Devices without going to conventional process of waiting 170 hours....total number of devices is 50 device

    $500 (Avg Bid)
    $500 Snittbud
    3 bud

    I need help with reading analogue signal using Sparkplug / Micronucleus bootloader

    $26 (Avg Bid)
    $26 Snittbud
    11 bud

    Hi attached you will find the settings for the device, it is not a mobile phone, its an android for scanning and programming nfc tags only. no mobile carrier service required, but the rest of the services must work after unlocked wifi, bluetooth, nfc tag programming, upc laser scanner. would like the newest OS that can be installed f...like the newest OS that can be installed from android or and if custom rom is able to be installed. I have a pc and usb connection to device and its ready now. You must have had experience with ZEBRA TC70x devices since they are very difficult and specific methods for these devices. Please don't assume you know and test on this device and brick it. if you have ZEBRA Symbol experience unlocking bootloader only. see all info attached and message me...

    $19 (Avg Bid)
    $19 Snittbud
    6 bud

    I have a tablet that has custom firmware with a locked bootloader running Android 10. I would like assistance with unlocking the bootloader and loading standard Android 10 OS.

    $167 (Avg Bid)
    $167 Snittbud
    11 bud

    I have some hardware with an XMega32 running an application that I have written. I require the firmware to be upgradable over CANbus. I have a CAN bootloader that I believe will do what I require, I just need it integrated correctly into my existing setup and don't have time to complete it myself. I need someone with experience with bootloaders, ATXmega hardware, and microchip studio.

    $439 (Avg Bid)
    $439 Snittbud
    24 bud

    I need to compile some older code for a PIC18 that was originally written using sdcc about 10 years ago. The machine has long since been retired and the version of eclipse used is also 10 years old. when installing it on a newer machine I get the error message that the the SDCC is orphaned. I propose that you log onto a fresh VM with windows 10 and install the SDCC and Eclipse and the milestone will be released when I am able to compile my code

    $116 (Avg Bid)
    $116 Snittbud
    4 bud

    1. setting up a cronjob that takes a picture from webcam anytime someone enters the guest user account 2. has putty ssh client booted at all times or another ssh server and this is invisible to the user 3. setting internet to automatically connect to any available wifi, or waiting for established internet connecti...to be invisible and not noticed by user 5. using a free geolocation api to grab exact geolocation/address where laptop is currently at and sending this information automatically to same ssh server the webcam picture and geolocation can be sent at the same time 6. having a keylogger running that is automatically sending new information whenever it is entered by the thief 7. creating a custom bootloader image that displays the name of the owner, address, and phone number ...

    $279 (Avg Bid)
    $279 Snittbud
    5 bud
    excel worksheet Avslutades left

    ...earnings. Select cell G5. Build a formula to add the commissions amount (E5) to the commissions amount times the rate (F5*E5). Copy the formula in cell G5 to cells G6:G14. Create and copy a SUMIF function to calculate total earnings by branch office. Select cell E18. Start the SUMIF function with cells $D$5:$D$14 as the Range argument. Set the Criteria argument as a relative reference to cell C18. Select cells G5:G14 for the Sum_range argument and make the references absolute. Copy the formula in cell E18 to cells E19:E20 without formatting to preserve borders. Format cells E18:E21 as Currency. Total the earnings in cell E21. Create and format the current date. Select cell G23 and insert the NOW function. Select cell G23 and click the Number group launcher [Home tab]....

    $34 (Avg Bid)
    $34 Snittbud
    10 bud

    ...this is kim from korea i need a custom arduino board that has mega2560, uproading chip(ft232 or atmega16), micro-b usb connector the board size is 65mm x 70mm maximum and i need the way to uproad arduino bootloader on the board(atmega2560) and i have a pdf file that including pins arrangement and the pins use 1.25 pitch connector(ex, molex-53047) so in short mega custom board(just changing pins arrangement on the arduino mege mini pro board) board size is 65mm x 70mm maximum(less size is okay) board has 1.25mm pitch connectors 4.i need the way uproding bootloader best way is that you make gerber file and order the board and test it -but if you can't order the board just give me gerber file and i order the board and solder the board and test it thank you^^...

    $381 (Avg Bid)
    $381 Snittbud
    34 bud
    ATTINY85 & Android OTG Avslutades left

    I am looking for experienced chap who has experience with micronucleus USB bootloader and digiCDC library. No time wasters please

    $116 (Avg Bid)
    $116 Snittbud
    3 bud