Microchip pic18 bootloaderJobb

Project Title: Bootloader For Renesas RL78 mcu Description: I am looking for a skilled developer to create a bootloader for the Renesas RL78 mcu. The ideal candidate should have experience with Renesas RL78 mcu and be familiar with the development environment. bootloader code is ready need help for run application code through it Specific Features: - UART communication: The bootloader should support UART communication for firmware updates and debugging purposes. MCU's Flash Memory: - The flash memory size of the MCU is 256KB. Hardware Platform Support: - The bootloader should be compatible with the On Chip Debugger Interface for seamless integration with the existing hardware platform. If you have experience in developing bootloaders and are fa...

I am looking for a Freelancer to help me with a project involving the C32-AWS-RTOS-Ethernet-MQTT-PulseCount-Timer. The main goal of this project is to implement pulse counting on PIC32 using MCC and RTOS to send to AWS vi...is to implement pulse counting on PIC32 using MCC and RTOS to send to AWS via MQTT. Specifically, I need assistance on using a real-time operating system for AWS IoT, implementing the MQTT protocol for data communication, and integrating pulse counting and timer functionality for data. The hardware platform required for this project is PIC32, and the software services/libraries necessary are Microchip MCC and RTOS. If you feel that you have the necessary experience and expertise to fulfill this project, please contact me! Please note I only deal direct with the d...

I am looking for a freelancer to help me with my project titled "IQ Connect - BLE new hardware". Purpose of the new hardware: - The purpose of the new hardware is to connect a newly developed device using Bluetooth Low Energy (BLE) with the Garmin Vivoactiove 4 and send timestamped 2byte value over to the Garmin Watch. (5/sec) The hardware has Microchip RN4020 for BLE communication. Appropriate firmware adjustments are needed. Desired range of the BLE hardware: The desired range of the BLE hardware is short range, up to 10 meters.

using PIC16F15386 for 9 analog i/p, control 13 latching relay, UART o/p to LCD display, UART o/p to ESP32C3, All i/p to be categorized to 6 levels, hysteresis to be considered, 3 different count down timer for each i/p based on 20ms time base. programming to be using PIC microchip assembly instructions. PCBA, relays, LCD are ready to test the program. a. Programming using microchip assembly instructions. C programming is not acceptable as it not perfect in our project b. The programmer should be familiar with control of latching relays. OR electronics engineer with 8-10 years’ experience. c. The successfulness will be considered if the program work on our ready build project. d. The detailed requirements will be provided if the freelancer accept above requirements.

...of an experienced Android developer who has knowledge and experience with unlocking the bootloader on a Mediatek chip Android device. Requirements: - Must have experience working with Mediatek chip Android devices - Knowledge and understanding of the bootloader unlocking process - Familiarity with the specific make and model of the Android device - Ability to troubleshoot and resolve any issues that may arise during the bootloader unlocking process Responsibilities: - Unlock the bootloader on the specified Mediatek chip Android device - Provide detailed instructions and guidance on the process for future reference - Ensure that the device remains fully functional and operational after the bootloader is unlocked Skills and Experience: - Strong under...

I need someone who have experience in avoiding root detection on android. There is android app that can detect almost all roots that i have already tested (Magisk, Magisk delta, shamiko, safetynet fix), when i open it, it is closing immediately with message that its detects magisk / unlocked bootloader. I test it on various of Google Pixel smartphones (from GP 1 to 5, from android 8 to android 12) So, the main goal is to have root and make possible to successful run the app.

I am looking for an experienced embedded Linux developer to help me with my project. The target hardware platform is the Raspberry Pi, and I need a custom bootloader with features for network booting, encryption support, as well as an IP discovery tool. The project must be completed within 3 months. I need a talented developer who can leverage the Yocto project to create the custom bootloader and get it up and running. The bootloader should be tailored to the specific needs of my project. Furthermore, I would like support for debugging capabilities should any issues arise during the development cycle. I'm looking for a reliable and experienced developer who can work within my specified timeframe and deliver an exceptional product. If you think you have the ...

I need a program for a rotary encoder that can generate the correct code to drive a MicroChip MCP 42010 digital potentiometer. The 42010 has 2 channels and there would be 2 rotary encoders, one for each output channel

... Responsibilities: Design and develop a secure and efficient bootloader for the STM32L151CCT6 microcontroller, which will reside in a separate partition in the flash memory. Create three separate sections within the device's flash memory: one for the bootloader, one for the currently running application firmware, and one for incoming firmware updates. Implement a mechanism in the bootloader to verify the integrity of the new firmware before applying the update, such as a checksum or CRC. Develop an OTA update mechanism that can receive and store incoming firmware updates (received via MQTT from AWS IoT Core) in the dedicated update partition of the flash memory, without disturbing the current firmware. Ensure the bootloader applies the new firmware ...

Hi, we have an old device with an STM8S103F3P6 integrated chip. We need copy the updated software in the chip to install in other identical devices. We never have worked with MicroCHIP IDE or similar. The task is training to us and suggest what components buy to copy the software of one device ( updated one ), to the others ( old versions ).

I am in need of assistance with bootloading my ATmega256 Arduino through the ICSP port. I have a specific bootloader in mind and require guidance in implementing it. I prefer to use a programming language other than C++ or Python. Additionally, the ATmega256 will be integrated into a device that falls under the "Other" category. Ideal skills and experience for this project include: - Extensive knowledge and experience with ATmega256 Arduino bootloading - Proficiency in a variety of programming languages - Experience integrating ATmega256 into devices beyond robotics or home automation

I am looking for a freelancer who can implement servo mode for the AK 80 64 T motor actuator in...actuator in Servo mode. Output deliverable for the program code is listed below. 1. Running the AK 80 64 motor in position-velocity multi loop mode, where user is giving desired position and desired velocity. AK 80 64 T motor have to move in accordance with the desired position and velocity values. 2. The position and velocity data to be printed in serial terminal in 5 milli sec interval I have microchip CANanalyzer with me to check transmitted and received CAN messages. I have R link to configure AK 80 64 T motor I can share manual of Actuators in the inbox. Once I get code, I can test code in the hardware setup and give feedback for code modification till expected deliverables a...

I am using Microchip PIC controllers and BLE controllers to allow Bluetooth communication between a handset and a headset. The code is in C.

I have a PIC controller and Microchip RN4870 BLE controller in a handset (Central) I have a PIC controller and Microchip RN4678-V/RM100 BLE controller in a headset (peripheral) I want both BLE controllers to appear as UARTs so I can pass short text strings, once per second. General requirements Devices simply pair, no authentication No power up sequence required for pairing No keyboard or UI required by user for pairing process

I have a handset (BLE central device) using a PIC controller and the Microchip RN4870 BLE controller I have a headset (BLE peripheral device) using a PIC controller and the Microchip RN4678-V/RM100. I need to be able both BLE controllers to appear as UARTs so I can send short text strings between them. General BLE Requirements Handset will only look for headset advertisement No authentication, just pair No keyboard or UI required No power up sequence required for pairing i.e. handset must be scanning before headset is advertising or vice versa. Thanks!

I tried a couple of days and I could not unlock the bootloader According to my researches, this version is made for Korean and unlock the bootloader is not possible: So I need your help with the validated steps to unlock the bootloader of this smartphone I'm using linux, I'm experienced with ADB, fastboot, TWRP, root, etc. In the past I flashed several androids, but this model is a challenge. The test, should be a video call using google meet in which you should guide my step by step to unlock the bootloader. I achieved only upgrade from android 6 to android 7

This is a single phase fan control system for small (0.1-2KW) fan motors, using a mosfet H bridge at 400VDC, looking for 2pwm outputs to control the H bridge (1 for + side and 1 for - side) with 0-10V control signal and enable inputs using a Microchip PIC device, preferably a PIC16F device. older microchip AN note attached

I am looking for a freelancer who can help me develop a 3 Phase Sequence Monitor for my system. The ideal candidate should have experience in electrical engineering and be familiar with microcontrollers and relay control systems. A low cost Microchip microcontroler shall be used. The power for the microcotroller, relay and interface circuit should be obtained from the 3 phase mains with a linear impedance converter (i.e. not switching.) Function description: After 3phase mains is applied, the circuit should start the detection. The power led should indicate that the microcontroller is working and performing the sequence detection. The output relay and the "Phase Ok" led should be synchronized ( using the same microcontroller pin is Ok.) Scope: Provide firmware, Alti...

It needs network, control of DSP chips via I2C, presets, and UART and bootloader and firmware update process. We have the code for Freescale chip in C, and it works perfectly but code needs to be moved to STM. Please apply if you are experienced and confident.

I have a small robot made by myself (using seri motor). Now I have to connect it to IoT using arduino and python. The ESP-8266 microchip is connected to my robot as well. The deadline is Thursday 27th of April (night). I have the link with the specific instructions and video tutorials that say exactly what is needed to be done, so you don’t have to come up with anything.

I have a small robot made by myself (using seri motor). Now I have to connect it to IoT using arduino and python. The ESP-8266 microchip is connected to my robot as well. The deadline is Thursday 27th of April (night). I have the link with the specific instructions and video tutorials that say exactly what is needed to be done, so you don’t have to come up with anything.

I am in need of experience...with writing software libraries for embedded devices. It would be preferable if the applicants have prior experience with embedded devices. I also need applicants to know how to debug and test embedded devices as well as write and maintain modular code. This will add to efficiencies of the project and result in rapid prototyping. The development board that I wish to use for this project is Microchip, Texas Instruments and NXP. I have the relevant source code already, so the applicant must be able to build the software out of that. The applicant must also have an understanding of the existing architectures, memory maps and buses used on these development boards. Please only apply if you have the relevamt experience and feel confident to deliver on thi...

I am looking for a Freelancer to help me set up an STM32 Arduino development environment. The processor architecture I am using is STM32. I'm not sure if I need a custom bootloader but I'm open to exploring the possibility. I want to set up either a Makefile or PlatformIO environment for this project. The person I hire should have experience working with both STM32 processors and the Arduino IDE. I'm looking for a reliable person to get this job done quickly and with quality.

we have a magnetic strip reader. all the files and code is available in GITHUB. need to build the hex file and upload those in ATMEGA168 MCU github: need to be done ASAP. Write "I can do" on top of the BID. thanks

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

On the base of the EHD07 Mplab structured strategy we need to receive the same strategy for the EHD08 here enclosed for keil or equilvalent because the new MCU is ST and not Microchip.

Need an assembly programming exper to use assembly programming language to code a simple microchip to display the number "2" For an expert, it would probably take 30 mins.

We are making a robotic lawnmower based on ATMEGA2560 and programmed with Arduino IDE. We have already created a large part of the software, we wanted to know if you are able to integrate some functions such as the management of the Microchip bluetooth (BM71BLE01FC2-0B04AA) which receives commands from a wireless bluetooth controller, such as a playstation 4 controller or compatible and which interfaces with the micro? Furthermore, we would need to know if you are able to integrate the daily programming mode, i.e. decide at what time of day to let the robot go out, for how long to cut and return to base. This by programming via 5-button keyboard and OLED display.

Searching for an embedded developer who will create a code for Zephyr RTOS which will do a firmware update over the bluetooth. On target device is Nordic Secure DFU client (Secure Bootloader) with BLE transport and we need the master which will run on another micro controller with Zephyr RTOS. The code should use standard Zephyr RTOS Bluetooth API. Image file will be stored on SD Card with FAT file system, but the code itself doesn't have to include communication with SD Card / FAT. Nordic Secure DFU protocol is described here: Here is the Android DFU Library in case it helps (the code we are looking for should have similar functionality as this library, but has to run on MCU with Zephyr

Hello guys, I am trying to set up the UART bootloader on PIC32CM MC00 Nano Curiosity Board, via Harmony v3 MCC and MPLAB X 6.00. I need someone with experience in it to help me do it step by step, for the specific controller, and PC32 generally. Thanks

...at a time. The server shall support multiple (min 8) managed connections. There should be min 8 AI channels on HAT, each supporting HART multi drop and standard 4-20mA inputs. The DD/EDDL/FDI file types of HART device vendors shall be supported. PACTWARE compatible & multiple stackable HATS. The use of pins of RPi must be approved by us. you may use existing dev kits from analog devices, ST, Microchip etc., but ensure the ready availability of main components & get our approval. Please adhere to current standards and all commands, support various AMS systems. Provide a test client in MS Visual Studio also. based on your advice etc. More details about the existing system will be shared with shortlisted persons. This may extend to additional help from you for development...

Hi, your email Flaplaud at does no longer work, I had a proposition for you.

I need to someone who can help me to program this PCB in order to make it function as a quickshifter for motorcycle application. I need someone good with programming in C on PICmicro from Microchip

Looking for a partner to consult on PLC (Power Line carrier) Modem development kit selection. Please do not respond if you do not have 1 year hands on experience with these modems development. We need up to 440VAC power line, 500 KHz freq support, using OFDM (Orthogonal). We are looking at Microchip, ST, TI, Renesas etc. However, we like to consider your valuable experience & advice in this matter. This may extend to additional help from you for development, testing etc. also. The budget is just a placeholder so please ignore it and bid your best price & delivery. Must share your prior experience related to our job only, in your response.

need customized rom/firmware to android - Huawei Mediapad M3 Lite 10The bootloader will be unlocked specification. - When you connect the device - Huawei Mediapad M3 Lite 10 - to power it has to boot up(start up) automatically. - When you unplug power it has to show it shut down within 60 sec, and count down and then close the device. - When it starts up, it has to show a customized picture/animation. - When it is started up I have to run one specific app. - It should not show any comand-line on the screen and run the app in full screen mode. - The volume should be set to 100% always - If the app crash it has to start up the app again. -The app have built in so it use wi-fi and you can setup wi-fi network from the app - The app uses the front camera and store image on the...

Tricore Boot BSL and GPT Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and...Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and read passwords, and information in the unlocked state of the processor, Password lock Opening Calculation Special Bootloader and Source Codes. I want people who have experience in this subject ...

I would like the design protray the imagry of a calendar/task list/microchip/circuit board/nodes. Please reference circuitry/networking/nodes asthetic (attached) to convey a task to do list as well as spiral binding of a calendar on the top. Imagine a calendar and a to do list combined into one logo. The name of the product is Hub Tax Calendar. If possible, please incorporate the name Hub Tax Calendar in the design. I'm open to incorporating Hub inside the calendar imagery (doesn't necessarily need to go outside the logo). The logo will be used in an app.

Looking for help getting started with Microchip BM83 Bluetooth project. Specifically using the MPLAB IDE and Harmony. Seeking an instructor/mentor on an hourly basis to assist me through a project.

Hi I have a fusion pbx, I need a dialing plan that I will contact with a did number and every call will reach the microchip on my computer. I also need help setting up a micro sip If fusion pbx is not familiar to you. And you have an offer of another platform that you can set up and quickly. So it doesn't matter to me - the main thing is the result as above

...computer (SBC) ie. Raspberry Pi, a chargeable large capacity battery, buttons and touch screen. Expertise regarding the operating system (bootloader in particular), utilized by our chosen SBC for the project/s, would also be highly valued. As well as having personal hands-on experience with designing and creating similar projects. Please answer to this question (since we do not read offers that are created by automatic bots, so we ask something that has nothing to do with the business to see if the text is read by a human): is horse bigger than computer. currently the most critical things we need help with: • Raspberry pi & Libre Computer "Le Potato" bootloader adjustment to make it boot into company logo and retain logo until application lau...

...mockups of proposed products. Develop and complete projects Sourcing of raw materials. Purchase electronics device and equipments depending upon project needs Troubleshooting embedded systems and diagnosing errors, malfunctions, or inefficiencies firmware drivers for hardware peripheral ICs. Analog, Digital, mixed signal, wireless & rf electronics design. Microcontroller (Atmel, ST, Renesas, Microchip, ARM etc.) based system design,development, and testing, Embedded C/C++ Programming. Implementing effective repairs, modifications, and upgrades to the embedded systems Schematic creation according to hardware design and PCB layout design with implementation using CAD tool (Altium) GSM Module, GPS Module, Wi-fi Module, Ethernet transceiver, SD Card interfacing. Generating diagno...

We need someone capable of unlocking MI 11T Devices without going to conventional process of waiting 170 hours....total number of devices is 50 device

I need help with reading analogue signal using Sparkplug / Micronucleus bootloader

Looking for Torrance Based Embedded ...(RS-485), control of GPIOs, analog sensor readings via external ADC (SPI), storage of data to flash memory (SPI), and communication to simple peripherals (i2c). The timing of various GPIO state changes, directed by serial commands, is crucial to the operation of this project. Thus, a good understanding of task scheduling, interrupts, and timing is required. • Requirements/Experience: • Microchip PIC, ARM Cortex-M3 Microcontrollers or similar • Serial Communication • Flash Memory • Process Scheduling/Task Scheduling • SPI and I2C Communication • GPIO Read/Write • Watchdog Timer and other Reliability enhancing features • Analog Circuit, digital logic, displays and motor controllers &bu...

generate two PWM sine-waves, (100, 300 Hz nominal) to drive DRV8833. LUT-DMA-PWM. LUT should 1/2 time period off. use PWM capture to track the phase of the sine-waves at a CLC trigger. use DMA reset counter at phase 0 of sine-wave. I will test the sine-wave on dspic33ch512MP508 and display on scope and use DRV8833 to drive a speaker to test the sinewave.

im looking at sharing my story about having a microchip without consent. This microchip allows whoever to see out of my own eyes and hear what I hear. I have medical records of the chip on Xray and the incision. I also have the strangest photo to prove that my eyes are being used to see through. Check out my Instagram for more proof. AER512

Microchip PIC12F675 controllers ASM file need to build in MPLAB. I am having some syntax errors. More details will provide in chat. Take a look at sample ASM file attached below. Don't waste our both of us time , if you don't have good experience in MPLAB IDE.

Hi Rohan Kanaiyalal L., ich möchte mit einem SAMD21G18A einen I2C Slave nachbilden. Das Projekt soll in Microchip Studio umgesetzt werden. Die Kommunikation mit dem Master habe ich bereits am laufen. Deine Aufgabe wäre es, 256 Register zu schaffen die vom Master beschreibbar und lesbar sind. Ich benötige die Lösung recht zügig. Daher biete ich einen hohen Preis. Ist das was für dich? Viele Grüße Marc