Ethernet bootloader pic18fJobb

Filter

Mina senaste sökningar
Filtrera:
Budget
till
till
till
Typ
Kompetens
Språk
    Jobbstat
    2,000 ethernet bootloader pic18f jobb har hittats, med prissättning USD

    ...requirement to be met on your side is a Android phone with unlocked bootloader onto which you can install the latest crDroid 10.2+ - compatibility see , or an unofficial 10.2+ build, to see if you can reproduce this issue The task here is to identify the anomaly and fix the issue so even the latest crDroid custom ROM for my Nokia 6.1 can again communicate and function seamlessly via adb with my Intel Mac running macOS Monterey 12.7.4. In-depth knowledge in the anatomy of Android and adb are required towards fixing this issue. In your job offer, first and above all include the following information: 1. Which Android phone do you have (Model + exact model identifier)? 2. Have you unlocked your phone's bootloader so you can install a custom ROM to it (Y/N)? 3. Can you...

    $87 (Avg Bid)
    $87 Snittbud
    21 bud

    I need a bootloader for the STM32H750B-DK development board. The bootloader must be written with STM32CubeIDE and must contain the .IOC file When the board is turned on, if there is a valid application in the board's QSPI memory (dual bank), it starts it If there is no valid application or if the "user" key is pressed, the bootloader must allow the loading of a new firmware (.xip file) from the PC to the QSPI memory (dual bank) via USB CDC Once the file has been uploaded, you must launch the application It is sufficient that we establish a serial communication protocol, I will take care of creating the PC software for choosing and sending the .xip file to be sent to the board.

    $211 (Avg Bid)
    $211 Snittbud
    14 bud

    I'm seeking an experienced network and security professional who can assist with the design and configuration of a network in a Small Office/Home Office (SOHO) environment. The wor...network that meets the specific needs of a SOHO. - Configuring a robust firewall to ensure the network's security. - Establishing an effective intrusion detection system. Ideal candidates will have a solid understanding and experience of: - Network design in a SOHO environment. - Firewall configuration. - Intrusion detection systems. Preference will be given to professionals with experience using Ethernet (IEEE 802.3). The ability to deliver a secure, efficient and robust network infrastructure is the ultimate goal. If you have the skills and experience, I'd love to hear how you can co...

    $539 (Avg Bid)
    $539 Snittbud
    2 bud

    I need experienced Linux System Network Engineer to configure the networking features of my Almalinux server. The work primarily involves: - NIC Configuration: The server uses an Ethernet Network Interface Card (NIC). I require assistance to properly configure this Ethernet NIC. - Ethernet Configurations: The foremost Ethernet setting I want to implement is the static IP setup. Therefore, a profound understanding of IP addressing and subnetting is essential. In addition to Linux system administration, your skills and experience should ideally include Almalinux, NIC settings configuration and IP addressing. This should be a straightforward assignment for those familiar with networking on Linux servers. Please only bid if you have prior experience in the abo...

    $76 (Avg Bid)
    $76 Snittbud
    15 bud

    Enable USB debugging mode and authorization by default. Set the device to automatically power on and boot when electricity is connected. Remove the initial setup wizard after the first installation is complete. Enable TCP/I...device to automatically power on and boot when electricity is connected. Remove the initial setup wizard after the first installation is complete. Enable TCP/IP functionality by default, using port 5555. Delete all unnecessary software applications. Install default APKs (customizable options available). Modify the default boot animation and wallpaper images. Emulate a WiFi signal using an Ethernet connection. Enable root access on the device. Manage guest user accounts through ADB or API methods, including adding, deleting, modifying, and querying (e...

    $1134 (Avg Bid)
    $1134 Snittbud
    35 bud

    ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

    $16 (Avg Bid)
    $16 Snittbud
    6 bud

    I'm seeking an advanced professional with no less than 6 years of expertise within the realm of embedded firmware development. Crucial skills and experience include: - Proficiency in the Linux and OS environment. - Demonstrated capability in real-time programming. - Proven proficiency in the programming language 'C'. - Experience TI AM 64 Sitara chip line - Experience in Ethernet up, Ethercat or Profinet stack. Should be able to integrate these and use in system - Experience in CAN is preferable - HW knowledge is required This project seeks to leverage these skills, with a focus on implementing high-quality real-time programming solutions within the Linux/OS framework. Prospective freelancers should possess strong debugging and problem-solving skills along with...

    $16 / hr (Avg Bid)
    $16 / hr Snittbud
    5 bud

    I’m looking for someone to help do the heavy lifting on a project. I need a Arduino (esp32?) Wi-Fi preferably but Ethernet is fine too. can handle 50 input buttons. Each of those 50 would then send out an OSC commands. I can do the physical work of assembly, install , basic configuration.

    $158 (Avg Bid)
    $158 Snittbud
    31 bud

    ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

    $23 (Avg Bid)
    $23 Snittbud
    7 bud

    ipv6 osi ipv4 ethernet and alL I think to be able to do this you should be expert in java, If you think you are expert in this topic kindly place a bid to enable us discipv6 osi ipv4 ethernet and discuss about the requirement clearly and decide on timeline

    $16 (Avg Bid)
    $16 Snittbud
    7 bud

    1. ESP32 MCU code that will handle file transfer and the print job operations on Thermal Printer. The MCU will receive pdf over WiFi and send to AI engine. 1.1 MCU will connect to printer over serial/USB port. 1.2 MCU will send data to API server through Ethernet. 1.3 MCU will store files in SD card. 1.4 MCU will process only one request at a time. 1.5 MCU will support only one thermal printer as jointly agreed. 2. AI Engine to detect shipping label from pdf file. 3. AI engine server log to show file transfer and debug as well as error logs like below ----------- 12/03/2024 19:00 Debug - file received from MAC address AA:BB 12/03/2024 19:00 Debug - successfully extracted and saved 12/03/2024 19:00 Debug - shipping label sent to MAC

    $1999 (Avg Bid)
    $1999 Snittbud
    1 bud

    I'm in need of a skilled MikroTik engineer to assist in managing a network setup already in design phase. The tasks include: - Configuring routers, switches and access points. - Troubleshooting and resolving any network issues. Specifically, we have a switched ethernet lab and it is 90% setup but we need support on a few configurations. The ideal candidate should be adept in MikroTik equipment, with extensive experience in configuring such devices and network trouble-shooting. A strong track record in implementing and managing network setups is highly valued.

    $24 / hr (Avg Bid)
    $24 / hr Snittbud
    11 bud

    ...need to develop a module project using Rockchip's RV1126. The SOM module must include: 1GB or 2GB DDR4 RAM, Power supply chip, EMMC, Processor. All I/Os should be accessible through a connector, which will be attached to the test board. The test board should have: Connections for 2 cameras, preferably compatible with camera modules used in ESP32 and Raspberry Pi, with 2 MIPI CSI camera inputs, Ethernet connection, Wifi connection via SDIO, Audio (microphone input), Audio (speaker output, PAM8403), 1 MIPI DSI display, 1 RGB Display connector. Adding to the previous specifications, the project must be delivered using Altium software. Payment will be split into stages, corresponding to the following phases of development: schematic, PCB, and, after manufacturing, testing of t...

    $516 (Avg Bid)
    $516 Snittbud
    25 bud

    I need an experienced IoT professional who's skilled in developing IoT applications, configuring SNMP protocols, and programming with Micropython. Your main tasks will entail: - Developing an IoT system employing sensors. - Programming temperature, motion, and light sensors. - Integrating SNMP protocols alongside WiFi, Bluetooth, and Ethernet communication channels. Consistent experience in the IoT space along with an extensive understanding of Micropython is quintessential. Understanding of SNMP protocols and varying communication channels is highly regarded. Please indicate your relevant experience in your proposal.

    $8 / hr (Avg Bid)
    $8 / hr Snittbud
    17 bud

    I am looking for an expert in embedded Linux, specifically Yocto Poky, to make some essential customizations to my BeagleBone Black device. The project includes: • Kernel configuration • Bootloader customization • Device driver integration In-depth experience related to WiFi modules, Dlpdlcr2000EVM Driver, I2C, I2S, and SPI Drivers are crucial for this task as these are the specific hardware components we will be working with. Apart from these, I would also like to introduce some changes to the user interface for improved navigation and accessibility. Professional experience in UI customization would be beneficial. I am expecting reliable, high-quality work from a freelancer with profound knowledge of these specific areas. A strong history of similar past project...

    $733 (Avg Bid)
    $733 Snittbud
    6 bud

    ...AIS, to be decided). The idea is starting from a existing CM4 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm • Power souce 12v • USB-C • Ethernet • CANBUS (Can provide design sources) • PCIe • SD card slot • LVDS signal + backlight (Can provide design sources) • Marine AIS class B (Can provide design sources) • Other UART inputs with optocouplers (to be decided) • GPS (Can provide design sources) • GPIO ports ac...

    $173 (Avg Bid)
    $173 Snittbud
    21 bud

    ...EXECUTED IMMEDIATELY (ANYDESK) AND COMPLETED WITH IN 1-2 HOURS OF ACCESS TIME. Anydesk will be to configure the ethernet cards to the hyper-v switch manager to add these to the CHR and then access can be granted directly via winbox to the mkt CHR TASKS 1) "Basic" instalation and configuration of CHR (cloud hosted router) on my pc running on hyper-v vm using my 4 port NIC 2.5GbE. "Basic" = internet gateway + dhcp server. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we would prefer to use cloudflare tunnel The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to th...

    $25 / hr (Avg Bid)
    $25 / hr Snittbud
    8 bud

    ...all GB ) configuration to a CHR (cloud hosted router) on my pc running on hyperv vm using my 2.5GbE 4 port NIC so I can have increased speed on my router. 2nd task is optional. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we would prefer to use cloudflare The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to the other devices on my network. I can't disable DHCP on the ISP Modem, so the CHR will get the public ip form the ISP modem but will use its own DHCP server as it is currently configured on the RB4011. - Import settings from RB4011Igs+ to CHR (VM already created) - create 60 day ...

    $23 / hr (Avg Bid)
    $23 / hr Snittbud
    10 bud

    ...1) I need to transfer my current Mikrotik RB4011Igs+ (ports are all GB ) configuration to a CHR (cloud hosted router) on my pc running on hyperv vm using my 4 port NIC 2.5GbE. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we would prefer to use cloudflare The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to the other devices on my network. I can't disable DHCP on the ISP Modem, so the CHR will get the public ip form the ISP modem but will use its own DHCP server as it is currently configured on the RB4011. - Import settings from RB4011Igs+ to CHR (VM already created) - create 60 day te...

    $24 / hr (Avg Bid)
    $24 / hr Snittbud
    9 bud

    ...TIME. 1) I need to transfer my current Mikrotik RB4011Igs+ (ports are all GB ) configuration to a CHR (cloud hosted router) on my pc running on hyperv vm using my 4 port NIC 2.5GbE. 2) Bypass ISP blocked port 80 and 443 using Mikrotik CHR on a hyper-v VM For port 80,443 bypass we want to use cloudflare The configuration will be like the diagram: the ISM modem (1) will connect to a 4 port ethernet NIC on my pc running CHR and from there it will connect to my current Mikrotik to connect to the other devices on my network. I can't disable DHCP on the Modem, so the CHR will get the ip form the ISP modem but will use its own DHCP server as it is currently configured on the RB4011. - Import settings from RB4011Igs+ to CHR (VM already created) - create 60 day test license ...

    $22 / hr (Avg Bid)
    $22 / hr Snittbud
    2 bud

    ...capable of configuring a NetApp 6600 storage system to effectively manage data storage. Specifically, the task involves: Netapp storage not providing any software interface for making raid configuration and not allowing for a software download from its official web site - connecting to the device throw the netapp software and configuring a raid 5 - i will provide a pc connected to the controller ethernet port with anydesk remote access - very important note I faild to find any proper software or a web interface for connecting to that device - previous experience with such a case is a must . The successful bidder must have demonstrated experience with netapp storage configuration and must have a software for connecting to the device that he used before in a similar one an...

    $200 (Avg Bid)
    $200 Snittbud
    1 bud

    I am seeking a skilled 3D designer to create a detailed design for a small network cable holder capable of accommodating 8-12 ethernet ports. The holder design should also include two din rail clips at the end for enhanced functionality and support. Key requirements are: - The 3D model should be designed to hold ethernet cables. - The design should accommodate 8-12 ports, qualifying it as a 'small' network cable holder. - Dual DIN rail clips need to be incorporated at the ends of the holder. - The design must be compatible with plastic production methods. The ideal candidate would have proven experience in 3D design for hardware and a thorough understanding of plastic product design. Familiarity with network infrastructure equipment would be a plus. Please inclu...

    $24 (Avg Bid)
    $24 Snittbud
    10 bud

    ...writing clean, efficient, and maintainable PHP code. 3. Communication with MikroTik OS via API: Experience in communicating with MikroTik OS through its API is crucial. The developer should understand how to establish communication channels, send requests, and receive responses using the API. 4. Understanding of PPPoE Protocol: A solid understanding of how PPPoE (Point-to-Point Protocol over Ethernet) works is required. The developer should be familiar with its implementation, configuration, and operation within network environments. Deliverables: 1. Development of a custom third-party module for UISP. 2. Integration of the module with PHP for seamless operation. 3. Implementation of communication functionalities with MikroTik OS through its API. 4. Documentation covering ins...

    $131 (Avg Bid)
    $131 Snittbud
    19 bud

    STM32 ETHERNET TO RS485 CONVERTER BOX We want to work with a person living in Turkey.

    $534 (Avg Bid)
    $534 Snittbud
    11 bud

    I'm looking for a seasoned programmer who can develop a program that will channel specific PC applications to either a WiFi or Ethernet connection, based on requirements. This targeting will be applied to three types of applications, developed using different coding languages: Python, Java, and C#. Key Requirements: - Development of a program that can efficiently set WiFi or Ethernet connection for specific applications on a Windows system. - The program should be able to target applications written in Python, Java, and C#. - The system must be user-friendly and offer simple ways to switch between WiFi and Ethernet connections for each individual application. - Conduct testing to ensure the program operates effectively under different scenarios. - Address any bu...

    $94 (Avg Bid)
    $94 Snittbud
    7 bud

    We want Embedded professionals having more than 5 years experience in embedded software and hardware development,  Should have sound knowledge of communication protocol like Rs232,RS485,SPI,I2C,USB & Ethernet and having experience in integration of various hardware system available in our organization and these hardware have RS232 and USB ports and the requirement is to capture the data from these ports and parsed the required data and then store it on the given server. The user must be expert in fetching data from the mentioned ports and ability to develop mobile app for this particular activity will be an added advantage.  Key Project Elements: - The fetching of data from the RS232 and USB ports and store it on the server. - Additional communication modules may be ...

    $15646 (Avg Bid)
    $15646 Snittbud
    9 bud

    ...interfacing with clients, and navigating change and risks. It Would Be An Asset If You Also Have: • Expertise in Network Architecture and communications protocols. • Acquaintance with Diagnostic tools, specifically CANalyzer, used for system/component integration. • Proficiency with Engineering Quality Tools, notably Failure Mode Avoidance (FMEA). • Experience with electrical protocols such as CAN bus, Ethernet, and a background in PCB. • An academic background in Electrical and Electronic Engineering, Systems Engineering, or Computer Science, or an equivalent blend of qualification and experience. Skills To Excel In This Role: • Profound knowledge of Electrical/Electronic systems down to the component intricacies. • Proven proficiency in system...

    $48 / hr (Avg Bid)
    $48 / hr Snittbud
    18 bud

    I'm experiencing a concerning issue with my MikroTik router (RB4011iGs+5HacQ2HnD-IN-TH). After a reset and netinstall to bring it back to factory settings, I've found that the wireless options are missing when I log into Winbox; even the wifi isn't showing anymore, only ethernet options are visible. I can give access in Teamviewer for fixing. An ideal person to tackle this would be someone with: - Extensive experience with MikroTik routers - Deep understanding of the Winbox interface - Capability to quickly troubleshoot and solve router software issues Although I've attempted to update my router's firmware, I'm not certain that the wireless settings were configured correctly after the reset. Moreover, I've not verified yet if the wireless inter...

    $120 (Avg Bid)
    $120 Snittbud
    23 bud

    Carry out a design project for an industrial network, both at the control level and at the cell level. At the cell level, the network will be made up of six PLCs and a supervision computer. At the control level, the supervision computer and five computers that will act as clients will be interconnected. In both cases, the defined technical specifications must be complied with, justifying the s... Explanatory report justifying the solutions provided. Descriptive plan of the facilities and distribution of elements. Budget of materials used. Distribution of equipment by levels: Cell Level: S7-300 PLCs (CPU 314 IFM) Supervision Computer (PC) Control Level: Supervisory Computers (PC) Client Computers (PC) Networks and Speeds: Cell Level: Profibus-DP at 1.5 Mbps Supervisory Level: 100 Mbps Et...

    $68 (Avg Bid)
    $68 Snittbud
    3 bud

    I'm seeking a professional to design a small, industrial network panel capable of supporting devices such as an ethernet switch, 24V DC power supply etc. Ideal skills include: - Experience in industrial network panel design - Understanding of AutoCAD design - Capacity to design for a network supporting up to 10 devices Your design should facilitate efficient data transmission and system reliability. Showcase your insightful grasp of network data needs in an industrial environment when applying. Attached below are the actual devices that would need to be included in the design.

    $60 / hr (Avg Bid)
    Brådskande
    $60 / hr Snittbud
    6 bud

    I'm in need of an experienced individual to assist in configuring Fiberhome OLT UMC. The specific tasks this project involves are: - Port Configuration: I require assistance configuring Ethernet and PON ports. A background in these specific ports would be extremely beneficial. - System Settings Configuration: You would also be dealing with the configuration of various system settings, so expertise in that area is a must. - We have a Radius Server and all ONU will authenticate via pppoe - If possible integrate Ubiquiti ONU with Fiberhome OLT To be successful in this role, you should have a deep understanding of Fiberhome OLT UMC and be proficient in system and port configurations. It's crucial that you pay attention to detail and ideally have notable experience in simila...

    $250 - $750
    Brådskande Försegla
    $250 - $750
    12 bud

    I am in need of an experienced freelance electronics designer who can assist us with design of a basic daughter board PCB for USB3 and Ethernet. Key Requirements: - Experience designing USB3 circuits - Available immediately The level of complexity for this project involves working on a multi-layered PCB. Importantly, please note the schematic already fully exists. The ideal freelancer should demonstrate previous experience in working with multi-layer PCB projects, and should be familiar with relevant tools and software. Kindly include previous PCB layout projects in your bids. By accurately interpreting my existing schematic, your role will be to check the design and feedback recommendations of suggests on function. Thank you in advance eager to start collaborating with you.

    $598 (Avg Bid)
    $598 Snittbud
    49 bud

    ...solution for seamless translation between two separate CAN buses. Skills and Experience: - In-depth knowledge of CAN bus system is essential - Experience in developing and working with CAN Bus protocols - Strong understanding of digital electronics. While the target protocol post translation is not specified at this stage, having a solid grasp of common protocols such as MODBUS, RS232, and Ethernet/IP will be advantageous. Understanding the complexities of handling data transfers between different buses is crucial, thus experience in this specific task is highly desirable. If you possess these technical skills and have a hands-on attitude towards problem-solving complex issues, you're just the expert we're after. Looking forward to your bids! Can bus signals need t...

    $219 (Avg Bid)
    $219 Snittbud
    8 bud

    I am in need of a skilled Embedded Firmware Developer to bring a ...Developer to bring a project to life. As the focus of this project is on communication protocols, I require a developer with extensive knowledge in this particular area. Detailed role requirements are: - Develop a firmware which supports Ethernet, under my directive. - Implement and test the Ethernet communication protocol within the firmware. - Optimize the efficiency and reliability of these communication protocols. To succeed in this role, you need to: - Have solid experience with embedded firmware development. - Have specific expertise in Ethernet protocol. - Have the ability to assure quality through testing and problem solving. Your work will directly contribute to the core functionality of...

    $784 (Avg Bid)
    $784 Snittbud
    8 bud

    I'm looking for an experienced software engineer specializing in FlexRay communication protocol. The purpose of this project is to develop software for data logging and analysis. The chosen candidate will possess: • Expertise in protocol development for high-speed data transmission capabilities. • Knowledge and experience in data logging over Ethernet/FlexRay specifically focusing on powertrain data on the Bosch MG1 ECU. • Competency in detecting and correcting errors with integrated redundancy. Specific data logging requirements include: • Engine speed • Throttle position • Coolant temperature, • Other additional parameters as required This project is not just about experience, but also about understanding the complexities that come with F...

    $40 / hr (Avg Bid)
    $40 / hr Snittbud
    4 bud

    I'm encountering issues when accessing files and folders through my local network on FreeNAS. As such, I am in need of an expert technician who can troubleshoot and access the files on FreeNas from my windows 11 Pro operating system home computer, ensuring smooth operations in the future. Both FreeNAS and the Home Computer are connected to the Router by Ethernet cable Key tasks involved include: - Diagnosing and resolving the difficulty in accessing files/folders The ideal candidate should possess an in-depth knowledge of local network operations, proficiency in the workings of a FreNAS system, and outstanding problem-solving skills in information and network troubleshooting. Experience in similar projects is also highly beneficial.

    $77 (Avg Bid)
    $77 Snittbud
    5 bud

    Network Technician (Rack and Stack) Location: Peach Springs, Arizona 2 to 3 days Contract Positions: 2 Key Skills: racking/unracking, running fiber/ethernet cables Receiving, unpacking, and inventorying equipment from vendors. Experience with Servers and Switches Rack mounting servers and other computing equipment. Qty 1 C9407R Switch (4 - 48pt modules) Qty 1 C9200L Switch Qty 4 SFP Modules Qty 15 CW9162I AP’s Physically inventory, rack, and cable equipment in accordance with the rack elevation diagrams Attaching and labeling network, KVM, and power cables in accordance with network diagrams. Troubleshooting, repairing and replacing servers and other computing equipment. Performing support services as direct by the team lead. Logging and tracking activities ...

    $50 / hr (Avg Bid)
    Lokalt
    $50 / hr Snittbud
    1 bud

    Carry out a design project for an industrial network, both at the control level and at the cell level. At the cell level, the network will be made up of six PLCs and a supervision computer. At the control level, the supervision computer and five computers that will act as clients will be interconnected. In both cases, the defined technical specifications must be complied with, justifying the s... Explanatory report justifying the solutions provided. Descriptive plan of the facilities and distribution of elements. Budget of materials used. Distribution of equipment by levels: Cell Level: S7-300 PLCs (CPU 314 IFM) Supervision Computer (PC) Control Level: Supervisory Computers (PC) Client Computers (PC) Networks and Speeds: Cell Level: Profibus-DP at 1.5 Mbps Supervisory Level: 100 Mbps Et...

    $83 (Avg Bid)
    $83 Snittbud
    13 bud

    ...5G SIM router (Virgin media). The system will primarily be used for entertainment and gaming, ensuring consistent connectivity and minimal lag. I prefer a managed service, where the expert will handle all facets of the setup and communicate effectively with me about the process. Currently I am using an oppo 5g WiFi 6 router that accepts 5g SIM card and I have 1 tp link deco ax3000 connected via Ethernet to act as a booster. I am considering buying another - I also have express VPN that I want to be configured to the routers however I do not have the time to do the research and investigate best options etc. I am willing to change the full set up so far but ideally would like an expert opinion on the subject. I play online gaming and I hate lag and latency, I watch streaming websit...

    $170 (Avg Bid)
    $170 Snittbud
    16 bud

    ...detailed specifications inherent to my company standards We do project with 60plus of the same type of drives in them. I have attached example drive drawings with a spread sheet explaining the drawing references. Each drive has up to two motors attached, each motor has up to 2 pecs attached to them connected by a splitter(Junction Box) Each drive has a 24v bus system attached (3 wires) and also a ethernet bus. Each drive has a name, each motor has a name, each pec name is related to the motor name + e.g. “C04_PEC01”, likewise for all items on the page. There are currently 2 pages associated with each device, a device connection page and a single line drawing 95% of devices are as above but there are a few non standard that will need editing Our electrical design en...

    $587 (Avg Bid)
    $587 Snittbud
    21 bud

    Set up communication between labview and PLC (in Sysmac studio) in 1 day. The PLC is of type Omron and primarily the PLC will be set up with ethernet cable. We will try to set up wifi or usb but thats unsure. As of now the PLC is connected to PC with ethernet cable. And i am on the other side to make GUI in labview. Everything is set up there but i need the labview to communicate with the PLC so that labview gets all data from PLC that is set up in Sysmac studio. I am thinking of using OPC UA server, but i dont know where to start on this part

    $127 (Avg Bid)
    $127 Snittbud
    17 bud

    I'm currently struggling with a boot issue on Linux Mint 21.3 Cinnamon. I've been trying to repair it using a live USB and have run both boot-repair and gparted. However, I can't access the GRUB bootloader since my SSD only boots to UEFI. See the screenshot of the live usb running gparted. I think I need to reformat the unallocated disk bot maybe? The exact issue I'm dealing with is that the system only boots to UEFI. As such, the ideal freelancer should be able to: - Understand and have experience navigating UEFI systems - Have expertise in repairing bootloader issues - Have experience with Linux Mint 21.3 Cinnamon and recovery methods Any available assistance would be greatly appreciated to help rectify this and get my system booting properly again. ...

    $24 (Avg Bid)
    $24 Snittbud
    4 bud

    ...understanding of how to optimize the setup for multi-device use within a home setting. An understanding of device-specific network requirements would be advantageous. I am looking forward to receiving your informed bids and working together to enhance my home office network. Currently I am running two separate networks. I use the EE 5g 300mbps for all wifi connections. I use sky 75mbps for a hardwired ethernet Lan. I want this to be one network. Sky network uses sky router SR203 and EE 5g network uses Huawei Outdoor Router H312-371 connected to Netgear Orbi SXR80 in AP mode with 4 satellites SXS80 I do not require any wifi improvement. I have a fab set up and great reception in all rooms. Please note I am not looking for a fail solution where one internet source is redundant...

    $53 / hr (Avg Bid)
    $53 / hr Snittbud
    4 bud

    I am looking for someone having experience with Fanuc and FOCAS. I want to export data from my Fanuc Controller to a PC or Raspberry Pi using FOCAS+Ethernet or any other method, to get real time data regarding: current program, cycle rate, idle time, down time, part count and other data. You can suggest your own method (if you have one) Controllers have the following Fanuc Versions: 0i-TF, 0i-TF Plus and 0i-TD Mate All CNC Machines have USB and Ethernet Ports There is no PLC in these machines

    $299 (Avg Bid)
    $299 Snittbud
    1 bud

    I am seeking a node red programmer to help build a runtime to display trends on a windows 10 PC back to an allen bradley ethernet/ip PLC 50 data points say 5 trend pages

    $56 / hr (Avg Bid)
    $56 / hr Snittbud
    6 bud

    I'm seeking a proficient professional to work on a project centered around the identification of friend or foe (IFF) signals. The main tasks will involve: - Conducting intricate analysis of signal patterns - Accumulating and processing radar data -Communication done between PC -> Ethernet TCP 100MHz -> FPGA -> receiver I need an expert who can teach me the tasks too. And can guide mye what to read about. - Some DSP and Sampling might be needed. Using Vivado While it's not necessary, previous experience with identification systems is beneficial. Being well versed in radio and signal processing is crucial for this role. The project timeline is approximately one month, so a professional able to deliver in a time-efficient manner is ideal. Availability from the...

    $478 (Avg Bid)
    $478 Snittbud
    11 bud

    ...communication and operation within an industrial setting. **Ideal Skills and Experience:** - Strong proficiency in programming languages relevant to embedded systems such as C/C++. - Previous experience with hardware design tools and software (e.g., CAD for circuit and PCB design). - Familiarity with networking and wireless communication technologies suitable for industrial applications (e.g., Ethernet, Wi-Fi, Bluetooth). - Experience with sensor integration and ensuring reliable data acquisition in an automation context. - A good understanding of industrial automation needs and the capability to design systems that are scalable, efficient, and reliable. This project will require someone who can efficiently bridge the gap between hardware and software to create a cohesive syste...

    $321 (Avg Bid)
    $321 Snittbud
    14 bud

    I'm seeking an expert in PIC microcontroller to assist in converting an existing embedded project. The primary goal of this conversion is to replicate the functionality of an existing project on a sister PIC chip. The original project was to create an Ethernet to Serial functionality on the Microchip Ethernet Starter Kit. This functionality was achieved. Now the objective is to move that project to a physically smaller PIC chip of the same family. A new custom daughterboard has been built. Some programmers are thinking to start over with the new chip. I believe this is an uncertain way forward. My request is to convert the existing project rather than start over. I am open to your suggestions. It's essential that interested freelancers have a strong backg...

    $785 (Avg Bid)
    $785 Snittbud
    44 bud

    I'm in need of development help for an encompassing PT100 to Ethernet platform. The main feature will be real-time data monitoring, so your skills in data management and application development in C# for real-time systems will be crucial. The project will include: - Creating standalone application, so knowledge of application development for Windows is needed. - Designing a system to negotiate the safe and efficient transmission of data from the PT100 to the application Your experience in networking, specifically TCP protocols and Ethernet connections, will directly contribute to the success of this project as well. Previous experience in similar projects is highly beneficial. Hoping to find a developer who is open to an ongoing relationship for potential expansion...

    $46 / hr (Avg Bid)
    $46 / hr Snittbud
    26 bud
    Hybrid Network Setup Avslutades left

    I am looking for a skilled network engineer or IT specialist to design and implement a hybrid networking solution for 6 computers within my office space. The purpose of this network is threefold: to facilitate file sharing among the computers, to provide internet access to each machine, and to connect all devices to shared printers. This setup should support both wired Ethernet and Wi-Fi connections, delivering flexibility and efficiency in our workspace. **Requirements:** - Experience in setting up and configuring hybrid networks (Wired & Wi-Fi) for small to medium-sized offices. - Proficiency in network security measures to ensure safe file sharing and internet access. - Ability to configure printers for shared access. - Strong problem-solving skills to effectively address a...

    $947 (Avg Bid)
    $947 Snittbud
    35 bud