Bootloader microchipJobb

Filter

Mina senaste sökningar
Filtrera:
Budget
till
till
till
Typ
Kompetens
Språk
    Jobbstat
    2,000 bootloader microchip jobb har hittats, med prissättning USD

    ...requirement to be met on your side is a Android phone with unlocked bootloader onto which you can install the latest crDroid 10.2+ - compatibility see , or an unofficial 10.2+ build, to see if you can reproduce this issue The task here is to identify the anomaly and fix the issue so even the latest crDroid custom ROM for my Nokia 6.1 can again communicate and function seamlessly via adb with my Intel Mac running macOS Monterey 12.7.4. In-depth knowledge in the anatomy of Android and adb are required towards fixing this issue. In your job offer, first and above all include the following information: 1. Which Android phone do you have (Model + exact model identifier)? 2. Have you unlocked your phone's bootloader so you can install a custom ROM to it (Y/N)? 3. Can you...

    $87 (Avg Bid)
    $87 Snittbud
    21 bud

    I need a bootloader for the STM32H750B-DK development board. The bootloader must be written with STM32CubeIDE and must contain the .IOC file When the board is turned on, if there is a valid application in the board's QSPI memory (dual bank), it starts it If there is no valid application or if the "user" key is pressed, the bootloader must allow the loading of a new firmware (.xip file) from the PC to the QSPI memory (dual bank) via USB CDC Once the file has been uploaded, you must launch the application It is sufficient that we establish a serial communication protocol, I will take care of creating the PC software for choosing and sending the .xip file to be sent to the board.

    $211 (Avg Bid)
    $211 Snittbud
    14 bud

    ...project is intermediate. The ideal freelancer for this project should: - Have experience with setting up MPLAB environments. - Understand the intricacies of PIC microcontrollers. - Be proficient with coding and debugging on the Windows platform. This task requires detail-orientated skills and a solid understanding of the coding environment for microchip controllers. I have an existing project developed on MPLAB IDE version utilising the PIC16F877 microchip controller. The compiler used is version . I am using the ICE2000 emulator (USB) and the Pickit 3 development kit. I want to upgrade to PIC16F18877, this device does not seem to be supported by MPLAB IDE I would prefer keeping the existing hardware (emulator, programmer). I have a second project (same environment...

    $542 (Avg Bid)
    $542 Snittbud
    35 bud

    ...Wordpress site by selecting the stallion and adding the mare information. This should be able to record the following details. Customer information: Name First and Last, Billing Address, Ship to Address, Additional Address, Contact Number, Email, Company Name (Optional), Vet Name (Optional), Mare owner Name if different than customer name (Optional) Or tick if same Mare Information: Mare Name, Microchip Number, DOB of Mare. Dose: If this is the first dose, the payment must be made in full. Second, third dose are free however if fourth Dose is given then comment needs to be added, Vet has checked and is satisfied. Invoicing: The platform should be able to record payment and invoicing details. When a new order is entered on the Wordpress site, or if done directly on th...

    $1115 (Avg Bid)
    $1115 Snittbud
    43 bud

    I am looking for an expert in embedded Linux, specifically Yocto Poky, to make some essential customizations to my BeagleBone Black device. The project includes: • Kernel configuration • Bootloader customization • Device driver integration In-depth experience related to WiFi modules, Dlpdlcr2000EVM Driver, I2C, I2S, and SPI Drivers are crucial for this task as these are the specific hardware components we will be working with. Apart from these, I would also like to introduce some changes to the user interface for improved navigation and accessibility. Professional experience in UI customization would be beneficial. I am expecting reliable, high-quality work from a freelancer with profound knowledge of these specific areas. A strong history of similar past project...

    $733 (Avg Bid)
    $733 Snittbud
    6 bud

    Embedded c programmer required for programming MICROCHIP PIC and ATMEL AVR Microcontrollers. Mostly work required on ATMEGA328P and PIC16F877A Microcontrollers.

    $90 (Avg Bid)
    $90 Snittbud
    21 bud
    Trophy icon Create a tiny program for an AVR chip Avslutades left

    I have an ATTINY816 chip here. The TX (PA1) and RX (PA2) are connected to a terminal program via a USB/RS232 converter. All I need is a little command interpreter. When I send "An" (all strings without the quotation marks) to the chip, it should: Return "okn" and set PB0 high for 0.1s. When I send "Bn" to the chip, ...interpreter. When I send "An" (all strings without the quotation marks) to the chip, it should: Return "okn" and set PB0 high for 0.1s. When I send "Bn" to the chip, it should: Return "okn" and set PB1 high. When I send "Cn" to the chip, it should: Return "okn" and set PB1 low. RS232 parameters: 9.6kbps / 8 data bits / 1 stop bit / no parity. Create a well documented little d...

    $40 (Avg Bid)
    Garanterad
    $40
    5 bidrag

    I'm seeking an experienced freelancer to debug an existing Microchip C32 USB program. The program hasn't been performing as designed, as the USB communication with the computer doesn't seem to work: - Evaluating the existing code, identifying and fixing the areas causing the USB communication functions not to execute as desired. - Ensuring optimal performance and stability after the debugging process. - Providing an explanation or report on the identified issues and the solutions implemented. - Ensuring the compatibility of the fix with MCC/Harmony latest version. The ideal candidate would have: - Proficient knowledge and experience in programming Microchip pic32mx using C32. - Sound understanding and hands-on experience in USB communication code. - Proven t...

    $274 (Avg Bid)
    $274 Snittbud
    17 bud

    As a dedicated PIC12F675 developer, I am seeking an expert programmer proficient in Assembly language. Understanding TT223 input management and LED control is vital as this task involves using ...(connected via 3 output pins) should light up. -on each touch 1st led 1 shuld be on and led 2&3 will be off and like wise on second touch led 2nd will be on 1&3 will be off on 3rd touch led3 will be on and 1&2 will be off - and on 4th touch all 3 led will be on and on 5th touch all led will be chaser form - on 6 touch all led will be off Your experience in assembly programming, especially with microchip technology, and understanding of electronic hardware would be the driving factors for success in this project. Note- the output of the ttp223 module is high when toch is d...

    $90 (Avg Bid)
    $90 Snittbud
    9 bud

    I'm currently struggling with a boot issue on Linux Mint 21.3 Cinnamon. I've been trying to repair it using a live USB and have run both boot-repair and gparted. However, I can't access the GRUB bootloader since my SSD only boots to UEFI. See the screenshot of the live usb running gparted. I think I need to reformat the unallocated disk bot maybe? The exact issue I'm dealing with is that the system only boots to UEFI. As such, the ideal freelancer should be able to: - Understand and have experience navigating UEFI systems - Have expertise in repairing bootloader issues - Have experience with Linux Mint 21.3 Cinnamon and recovery methods Any available assistance would be greatly appreciated to help rectify this and get my system booting properly again. ...

    $24 (Avg Bid)
    $24 Snittbud
    4 bud

    ...system main points should be: Internal font generation or ability to load external fonts Double-buffering to allow real-time message formation while printing The ideal candidate will possess proven experience of either print engine development within Thermal Labelling, Inkjet, or Thermal Transfer Overprint industries or driver board development within any of the above industries Knowledge of Microchip processors and development systems would be an advantage. The deadline and further project specifics will be discussed with the chosen candidate....

    $24885 (Avg Bid)
    $24885 Snittbud
    10 bud

    I'm seeking an expert in PIC microcontroller to assist in converting an existing embedded project. The primary goal of this conversion is to replicate the functionality of an existing project on a sister PIC chip. The original project was to create an Ethernet to Serial functionality on the Microchip Ethernet Starter Kit. This functionality was achieved. Now the objective is to move that project to a physically smaller PIC chip of the same family. A new custom daughterboard has been built. Some programmers are thinking to start over with the new chip. I believe this is an uncertain way forward. My request is to convert the existing project rather than start over. I am open to your suggestions. It's essential that interested freelancers have a strong background i...

    $785 (Avg Bid)
    $785 Snittbud
    44 bud

    I'm on the lookout for a highly knowledgeable Microchip assembler expert well-versed in ASM code. The project entails updating a program I use for a light. Here's what I'm specifically looking for: - Strong knowledge and previous experience with Microchip assembler and ASM code. - Documented history of updating, optimizing, and troubleshooting programs. - Demonstrable evidence of past projects using ASM code would be a sure-fire bonus. In your bid, please, specify details about your past experiences relevant to this task. The knowing of your ability to execute this job efficiently is vital to your selection. Ideally, if you've worked on Microchip chips before or have experience with light-programming, you could be the perfect fit! The project in...

    $556 (Avg Bid)
    $556 Snittbud
    15 bud

    Use Microchip Harmony to setup and configure a project using the PIC32MX174F256B. Experience is required with teh PIC32MX family and Harmony, MPLAB X & XC32

    $526 (Avg Bid)
    $526 Snittbud
    23 bud

    I require assistance with programming and configuring an Atmel M90E36A. - Task: The primary service needed is writing a C++ code for the stated IC, which will allow for an auto calibration code from Microchip to be implemented. - Outcome: Ultimately, the implementation of this code should result in improved precision of readings. Ideal Skills and Experience: Proficiency in C++ is a must, along with prior experience in dealing with IC programming. Experience in working with Atmel M90E36A specifically, will be an added advantage. Knowledge on Microchip technology and calibration methods would be beneficial in achieving the desired outcome.

    $40 / hr (Avg Bid)
    $40 / hr Snittbud
    18 bud

    I'm looking for a skilled individual who can design a custom PCB that features an ESP8266 microchip. The PCB needs to have the following features: We managed to build a working prototype that works with multiple boards, including a Wemosd D1 mini, and a suil moisture sensor But it's better to have it in a single board all together. We handle building the software.

    $154 (Avg Bid)
    $154 Snittbud
    44 bud

    In need of a dedicated and proficient individual who can spark my dream to life - developing a cat-specific microchip tracking system. What I Am Looking For: • Extensive knowledge of microprocessing and GPS functionality • Previous experience in pet-related tracking technology would be ideal, however not necessary • Prowess in designing user-friendly interfaces Tracking Functionality: As for the tracking functionalities, since I skipped this during the question phase - I'm keeping an open mind. I am interested in hearing your expert recommendations so that this custom, feline tracking system is innovative, reliable, and most importantly effective. Timeline: There is no rush on my part, I am looking for quality driven results over rushed deliveries. Consequen...

    $24 / hr (Avg Bid)
    $24 / hr Snittbud
    61 bud

    ...Module and a PIC 8bit MCU. The project requirements are as follows: - RFM96 Module (Datasheet attached) - Please use interrupts to communicate with RFM96. - Use LoRa protocol to communicate - Please consider in this project after sending data each time uC and RFM96 will be fully powered off, that means next turn should take minimum time to initialize everything. - PIC 8bit MCU programmed with Microchip MPLABX & XC compiler. - Setup one module as Host and other 6 as Client so that host can listen up to 6 clients and receive data - RFM96 has receiving buffer where you can store received data and one by one read buffer through MCU and print received data on serial port. Note: - Please note that there is no sensor used in this application you will be sending just raw Hex values...

    $120 (Avg Bid)
    $120 Snittbud
    17 bud

    Hello I have a project need to have a bootloader to do a firmware upgrade via UART0, can use mcuboot to do it

    $121 (Avg Bid)
    $121 Snittbud
    18 bud

    Project Description: I am looking for a skilled developer who can help me with locking the bootloader of my OnePlus Nord 3 device while preserving root access. Here are the project requirements: Code : Device Information: - Brand and model: OnePlus Nord 3 Data/Settings Preservation: - I do not need to preserve any specific data or settings on my device. Current Device State: - The device is not rooted but the bootloader is unlocked. Skills and Experience Required: - Strong knowledge and experience in Android device customization and rooting. - Proficiency in bootloader locking and preserving root access. - Familiarity with OnePlus devices and their specific requirements. - Ability to work with the OnePlus Nord 3 model specifically. Please note

    $351 (Avg Bid)
    $351 Snittbud
    11 bud

    I am looking for a freelancer who can adapt the fastLED library from Arduino to a Microchip PIC microcontroller. Specific Microchip PIC microcontroller model: PIC18F Skills and Experience: - Extensive experience with Microchip PIC microcontrollers - Proficient in programming and adapting libraries for microcontrollers - Familiarity with the fastLED library and its functionalities - Ability to work on commercial projects and meet deadlines Objective: The main objective of this project is to adapt the fastLED library to a Microchip PIC microcontroller for the development of a commercial product. also want to do some programming of the led and patterns

    $120 (Avg Bid)
    $120 Snittbud
    17 bud

    Project Title: C programming microchip studio Microchip: ATSAME54 explained pro development board Project Requirement: - The client has a specific requirement in mind for the project Timeline: - The project should be completed within a month Ideal Skills and Experience: - Proficient in C programming language - Experience with microcontroller programming, specifically for the ATSAME54 microchip - Familiarity with Microchip Studio or similar development environment - sensor communication protocols (SPI, UART, I2C) - Ability to understand and implement specific project requirements

    $71 (Avg Bid)
    $71 Snittbud
    13 bud

    ...Hardware Designing PCB Designing Schematic/Circuit Designing PCB Assembling 3D Design and Printing Automation AI-assisted development App Development, both Android and iOS Web Application Development Your verifiable expertise should extend to tools like Altium, Eagle, KiCad, Orcad, Proteus EasyEDA, Solidworks, Fusion 360, Arduino IDE, STM32 IDE, MPLAB, MATLAB, Microchip Studio, Eclipse, Intellij, Netbeans, Atom, FlatCAM, Android Studio, XCode, VSCode, WinAVR. Avoid using copy/paste bids; only bid if you're proficient and capable of handling the jobs we offer. In your first reply, provide a comprehensive portfolio with references outside Freelancer for verification. NOTE! Failure to check our profile will disqualify you. Ensure your bid i...

    $363 (Avg Bid)
    $363 Snittbud
    51 bud
    Stack Bacnet Protocol Avslutades left

    Project Description: - I a...in implementing the Stack Bacnet Protocol for building automation purposes with microcontroller. - The required communication medium for the Bacnet protocol is MSTP. - I need assistance with both the software and hardware aspects of the Bacnet implementation. - The ideal candidate should have experience in Bacnet protocol implementation, specifically in building automation with microcontroller microchip 8 bits PIC18F57Q43. - Knowledge of MSTP communication medium is necessary. - Proficiency in both software and hardware aspects of Bacnet implementation is required. - Strong problem-solving skills and attention to detail are essential for this project. - The freelancer should be able to work independently and deliver high-quality results within the given ...

    $417 (Avg Bid)
    $417 Snittbud
    17 bud

    ...Module and a PIC 8bit MCU. The project requirements are as follows: - RFM96 Module (Datasheet attached) - Please use interrupts to communicate with RFM96. - Use LoRa protocol to communicate - Please consider in this project after sending data each time uC and RFM96 will be fully powered off, that means next turn should take minimum time to initialize everything. - PIC 8bit MCU programmed with Microchip MPLABX & XC compiler. - Setup one module as Host and other 6 as Client so that host can listen up to 6 clients and receive data - RFM96 has receiving buffer where you can store received data and one by one read buffer through MCU and print received data on serial port. Note: - Please note that there is no sensor used in this application you will be sending just raw Hex values...

    $139 (Avg Bid)
    $139 Snittbud
    19 bud

    I'm looking for an experienced freelancer who can help me with a pricing of vet services (grooming, general surgeries, vaccinations, microchip and consultation) for vet clinics in Riyadh. The summary must include comparison of prices between more than 10 vet clinics in a spreadsheet format. This is a great opportunity to showcase your research and data collection abilities, as well as presenting the final results in a professional and user-friendly way. I'm looking forward to seeing your submissions soon. Thank you for your time.

    $119 (Avg Bid)
    Lokalt
    $119 Snittbud
    26 bud

    I am looking for a skilled developer with experience in Yocto to modify and compile at91bootstrap and...developer with experience in Yocto to modify and compile at91bootstrap and u-boot bootloaders and kernel source. The specific modifications needed include: - Change RGB LED settings in order to modify the color boot sequence - Adding custom drivers - Implementing security patches The ideal candidate should have: - Strong knowledge and experience with Yocto - Proficiency in modifying and compiling bootloader and kernel source code - Familiarity with adding custom drivers and implementing security patches The project has a preferred timeline of completing within 1 week. However, if you have a flexible schedule and can meet the requirements within a different timeframe, please le...

    $194 (Avg Bid)
    Brådskande
    $194 Snittbud
    5 bud
    nrf9160 bootloader Avslutades left

    I have a project for Nordic nrf9160 MCU, I need UART base firmware upgrade bootloader code. It must UART0 ( the default port for AT command) and no MCUboot used Finally you need to provide the source code and UART communication protocol

    $148 (Avg Bid)
    $148 Snittbud
    20 bud
    Embedded C, C++ Avslutades left

    Im looking for someone who can support me in coding. He/She must have string Embedded knowledge with C and C++ skills , Microcontroller knowledge, driver development, ADC knowledge, freeRTOS, data modeling, framework, bootloader exp.

    $1312 (Avg Bid)
    $1312 Snittbud
    19 bud
    picbasic microchip Avslutades left

    I have a firmware system written in PicBasic for a microchip 18F46K22 processor. I am trying to convert to a microchip 18F47K40 processor. I am using the Taylor interrupt code to handle 2 serial ports and a timer. The original code is running correctly but has insufficient memory space for future upgrades. I am looking for help in getting the system up and running.

    $50 / hr (Avg Bid)
    Sekretessavtal
    $50 / hr Snittbud
    5 bud

    ...feature/issue. 5. Collaboration: Collaborate with our in-house hardware and software engineers to ensure the firmware is fully integrated with all system components. 6. Troubleshooting: Identify, diagnose, and resolve firmware issues in a timely manner. 7. Compliance: Adhere to industry standards and company policies throughout the firmware development process. Requirements: - Well versed using the Microchip dsPIC33 microcontrollers - Experience with Espressif ESP32 S series microcontrollers - Proven expertise in digital power control (synchronous buck, boost, etc). - Proficiency in SPI, I2C, WiFi, Ethernet, and Bluetooth protocols. - Experience with real-time operating systems. - Knowledge of secure coding practices. - Strong programming skills in C/C++. - Familiarit...

    $1212 (Avg Bid)
    $1212 Snittbud
    10 bud

    I am looking for a programmer to help me develop an intricate program for a Microchip 12f510. The program must be written in C and it needs to have the capability to control peripherals. Additionally, I have a specific microchip model in mind for testing the program. Finding the right person for this job is imperative, especially since the microchip programming requires a specific technical expertise. If this sounds like a project that you would be committed to taking on, please reach out to me with your qualifications and experience.

    $14 (Avg Bid)
    $14 Snittbud
    4 bud

    ...project involving the LoRa RFM96 Module and a PIC 8bit MCU. The project requirements are as follows: - RFM96 Module (Datasheet attached) - Prefer using interrupts to communicate with RFM96. - Please consider in this project after sending data each time uC and RFM96 will be fully powered off, that means next turn should take minimum time to initialize everything. - PIC 8bit MCU programmed with Microchip MPLABX & XC compiler. - Sending data to TTN through OTAA and ABP method at 915MHz (North America) Note: - Please note that there is no sensor used in this application you will be sending just raw Hex values. - We can talk about which PIC uC to use so that to test the we do not need to reconfigure everything. - You are welcome to use some Github library or functions, in tha...

    $121 (Avg Bid)
    $121 Snittbud
    17 bud

    Project Overview: We are seeking an experienced custom ROM developer to design a secure and feature-rich ROM for Google Pixel 5 & Samsung A20. The custom ROM should emphasize user privacy, security, and enhanced device controls. Key Features: Encrypted Local Storage: All data stored locally on the device should be encrypted. Lock Bootloader: Ensure the bootloader is locked to prevent unauthorized tampering. Remove Recovery System / Safe Mode: Eliminate options to access recovery mode or safe mode. Lock Firmware with Secure Keys: Ensure firmware can only be updated with secure keys. Isolated App Environment: Applications should run in isolated environments, ensuring inter-app security. Integrated VPN: A built-in VPN feature for secure browsing and data transmission. Brut...

    $750 - $1500
    Försegla Sekretessavtal
    $750 - $1500
    2 bud

    We have a current commercial system that runs on the dsPIC33EP512GP506 (Ansi C code). Also we want to take advantage for future development of the capabilities of the ESP32 S3 especially ESP NOW RF. This project has 3 key elements: 1) Redesign the current circuit board to be exactly the same size, same plugs, same mounting holes and peripherals but change the microprocessor. Will require new schematic and gerber files 2) Migrate the C code especially device drivers to run efficiently on the ESP32 S3 ensuring software timers work at the same speed as the current ones. 3) Build in support for ESP NOW 4) Build 20 prototype boards with all components to fully prove the design. We will provide 2 sets of peripherals to the freelancer. Peripherals are: 1) 4 x 16 character LCD (including bac...

    $1645 (Avg Bid)
    $1645 Snittbud
    36 bud

    I am seeking an experienced freelancer who is familiar with the microchip dsp33 series and digital power electronics firmware. Tasks: - Writing firmware for the project - Troubleshooting and debugging any issues that arise during the development process Requirements: - Prior experience with microchip dsp33 series and digital power electronics firmware - Strong firmware development skills - Ability to work efficiently and meet tight deadlines Timeline: - The project is urgent and needs to be completed within 1 week If you have the necessary skills and experience, please submit your proposal along with examples of your previous work in this area.

    $21 / hr (Avg Bid)
    $21 / hr Snittbud
    11 bud

    Project Title: SAMD (Atmel/Microchip) programming Description: I am looking for a freelancer who is skilled in programming the SAMD21 microcontroller, especially the SAMD21's internal configurations. I am a skilled C programmer with much experience with Atmel/Microchip microcontrollers, using ASF sometimes (when it's convenient) but also coding without ASF. However, sometimes I encounter problems getting the correct C code to configure some aspects of the SAMD microcontrollers. I am looking for expert help so I don't have to spend too much time working on unexpected SAMD configuration difficulties. Specific freelancer requirements: - Very experienced in programming the SAMD21 microcontroller - Proficient in programming languages C Timeline: - The project t...

    $37 / hr (Avg Bid)
    $37 / hr Snittbud
    28 bud

    hello ... i was given a locked pixel7 .... its alreadyn been attempted to factory reset .... i have no access to the phone to enable developer options and oem unlocking ... i simply wish to use the phone .... i plan to flash graphene os over it ...... so either unlock the bootloader .... or flash ota or factory image over the top of the android rom

    $80 (Avg Bid)
    $80 Snittbud
    16 bud

    I am in need of a bootloader for my STM32F405 which would allow for firmware updates over the air, as well as enable communication with a GSM module. I prefer to use a SIM7600 module. The bootloader doesn't need to have any specific features or functionalities--any standard features will suffice.

    $367 (Avg Bid)
    $367 Snittbud
    7 bud

    I'm looking for a freelance programmer / Software Engineer to prepare a Step by S...determined people - i.e. fuses and other security features on the ATSAMD51 will need to be employed. I do not want people to extract the program or code and then be able to upload it onto copied devices. I do not require write protect, only read protect. I have ATMEL Studio (on a PC) and a Segger J-Link Mini. I am happy to purchase additional software or equipment as needed. In the past, I put a Bootloader on the chip with ATMEL Studio and the J-Link; but, then used the Arduino IDE to upload the programmer via a USB. I would like the process to be on a word doc, be very clear, step by step and preferably have photos as part of the explanations. The successful applicant may have lots of fol...

    $284 (Avg Bid)
    $284 Snittbud
    16 bud

    I am looking for a freelancer who can assist me with the u-boot-tools and uploading the Openstage 20E SIP Firmware. I require help with both tasks. Specifically, I have a specific version of the firmware that I want to upload, so I will provide the necessary files for this. I want to ensure that I have all the necessary hardware and cables to connect the device for uploading the firmware, and I can confirm that I have already obtained them. Ideal skills and experience for this job include: - Proficiency in u-boot-tools and firmware uploading - Knowledge of Openstage 20E SIP Firmware - Familiarity with hardware and cable connections for firmware uploading If you have the necessary expertise and experience in these areas, please bid on this project.

    $10 - $30
    $10 - $30
    0 bud

    I am looking for a freelancer who is experienced in MPLAB using Microchip Harmony v3 framework. The freelancer needs to create a new project in MPLAB for PIC32MZ, i´m using this board: so is good if the freelancer owns this board. MCU: PIC32MZ2048EFH144 PHY: LAN8740 The project must: - Assign IP to the ethernet; - Respond to PING commands; - Receive 1000 bytes on UDP port 9000; - Send these 1000 bytes on SPI1 using DMA.

    $80 (Avg Bid)
    $80 Snittbud
    14 bud

    I am looking for a freelancer who can help me with unlocking my Google Pixel 7 or flashing it back to factory settings. The bootloader for my device is currently locked. Skills and Experience: - Experience with unlocking bootloaders and flashing devices - Knowledge of Google Pixel devices and their specific requirements - Familiarity with the process of unlocking bootloaders and flashing devices back to factory settings Please note that I only require one of these actions to be performed on my Google Pixel 7.

    $17 (Avg Bid)
    $17 Snittbud
    2 bud

    I'm looking for an experienced freelancer to add FIPS to my bootloader. I am currently using GRUB for my bootloader, and I need to install additional components for the FIPS installation. The type of FIPS that I need is FIPS 140-2. This project requires in-depth knowledge and experience with FIPS compliance. If you think you can do the job, I'd be glad to hear from you.

    $397 (Avg Bid)
    $397 Snittbud
    9 bud

    I am looking for an experienced PCB designer with intermediate level skills to help me with a project. The ideal candidate should have experience in designing mixed-signal PCBs and should be familiar with Microchip or Xilinx FPGAs. Requirements for the project include: - Designing 4 simple PCBs - Integrating both digital and analog components on the PCBs - Proficiency in using Xilinx FPGAs Skills and experience required for this job: - Intermediate level PCB design - Experience with designing mixed-signal PCBs - Familiarity with Microchip or Xilinx FPGAs If you have the necessary skills and experience, please submit your proposal.

    $131 (Avg Bid)
    $131 Snittbud
    21 bud

    Project Title: Bootloader For Renesas RL78 mcu Description: I am looking for a skilled developer to create a bootloader for the Renesas RL78 mcu. The ideal candidate should have experience with Renesas RL78 mcu and be familiar with the development environment. bootloader code is ready need help for run application code through it Specific Features: - UART communication: The bootloader should support UART communication for firmware updates and debugging purposes. MCU's Flash Memory: - The flash memory size of the MCU is 256KB. Hardware Platform Support: - The bootloader should be compatible with the On Chip Debugger Interface for seamless integration with the existing hardware platform. If you have experience in developing bootloaders and are fa...

    $9 / hr (Avg Bid)
    $9 / hr Snittbud
    4 bud

    I am looking for a Freelancer to help me with a project involving the C32-AWS-RTOS-Ethernet-MQTT-PulseCount-Timer. The main goal of this project is to implement pulse counting on PIC32 using MCC and RTOS to send to AWS vi...is to implement pulse counting on PIC32 using MCC and RTOS to send to AWS via MQTT. Specifically, I need assistance on using a real-time operating system for AWS IoT, implementing the MQTT protocol for data communication, and integrating pulse counting and timer functionality for data. The hardware platform required for this project is PIC32, and the software services/libraries necessary are Microchip MCC and RTOS. If you feel that you have the necessary experience and expertise to fulfill this project, please contact me! Please note I only deal direct with the d...

    $296 (Avg Bid)
    $296 Snittbud
    21 bud

    I am looking for a freelancer to help me with my project titled "IQ Connect - BLE new hardware". Purpose of the new hardware: - The purpose of the new hardware is to connect a newly developed device using Bluetooth Low Energy (BLE) with the Garmin Vivoactiove 4 and send timestamped 2byte value over to the Garmin Watch. (5/sec) The hardware has Microchip RN4020 for BLE communication. Appropriate firmware adjustments are needed. Desired range of the BLE hardware: The desired range of the BLE hardware is short range, up to 10 meters.

    $1323 (Avg Bid)
    $1323 Snittbud
    27 bud
    6 phase controller Avslutades left

    using PIC16F15386 for 9 analog i/p, control 13 latching relay, UART o/p to LCD display, UART o/p to ESP32C3, All i/p to be categorized to 6 levels, hysteresis to be considered, 3 different count down timer for each i/p based on 20ms time base. programming to be using PIC microchip assembly instructions. PCBA, relays, LCD are ready to test the program. a. Programming using microchip assembly instructions. C programming is not acceptable as it not perfect in our project b. The programmer should be familiar with control of latching relays. OR electronics engineer with 8-10 years’ experience. c. The successfulness will be considered if the program work on our ready build project. d. The detailed requirements will be provided if the freelancer accept above requirements.

    $1438 (Avg Bid)
    Sekretessavtal
    $1438 Snittbud
    43 bud